• Title/Summary/Keyword: Noise standards level

검색결과 109건 처리시간 0.036초

Photonic-Assisted Reactive-Near-Field Analysis of a 3 dB-Tapered Ka-Band Array Antenna

  • Lee, Dong-Joon;Kang, Jeong-Jin;Kang, No-Weon;Kim, Wan-Sik;Park, Wee-Sang;Rothwell, Edward J.;Whitaker, John F.
    • Journal of electromagnetic engineering and science
    • /
    • 제10권1호
    • /
    • pp.18-24
    • /
    • 2010
  • A Ka-band microstrip array antenna for wide-range detection of moving targets is analyzed through a photonicassisted reactive-near-field characterization technique. The antenna array employs a 3-dB-tapered feed network to suppress the sidelobe level while retaining a wide azimuth beamwidth for a wide detection range. The relative nearelectric field patterns of the array and its 3-dB-tapered feed lines have been measured using an electro-optic fieldmapping technique for minimally invasive millimeter-wave sensing. A number of typical limitations on the technique, involving bandwidth, low signal-modulation depth, and high laser-induced noise in high-frequency applications, have been overcome by suppressing the carrier portion of the optical interrogation beam.

공동주택 내부 공간의 잔향시간 특성 조사 연구 (A Study on the Reverberation Time Characteristics of Inside Space of Apartment Buildings)

  • 정정호;이병권;전진용
    • 한국소음진동공학회논문집
    • /
    • 제25권4호
    • /
    • pp.291-298
    • /
    • 2015
  • In this study, the reverberation time of apartment living room was measured and distribution of the reverberation time was analyzed. In addition, sound field characteristics of mock-up test room similar with living room and timber structured bedroom was investigated with addition of furniture and sound absorption material. Average reverberation time of unfurnished apartment unit was 1.11 s, and reverberation time in 630 Hz~2000 Hz bands were longer than 1.2 s. It was found that from the field measurement results, reverberation time characteristic of furnished apartment living room was uniform in most of frequency bands. Averaged reverberation time of furnished living room was 0.48 s and the reverberation time of bedroom was 0.44 s. Standardized sound pressure level correction values were calculated from the average reverberation time of furnished and unfurnished apartment units. The correction value of unfurnished living room was −3.4 dB and that of furnished living room was 0.2 dB. Measured reverberation time of furnished and unfurnished apartment units indicated that reference reverberation time; 0.5 s, in KS and ISO standards is reasonable also in Korean residential environment.

화강암에 대한 워터젯 파쇄 메커니즘에 관한 연구 (A Study on Waterjet Fracture Mechanism for Granitic Rocks)

  • 오태민;조계춘
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.643-648
    • /
    • 2010
  • Waterjet is a very useful technology for rock excavation because of low level noise and vibration during breaking rocks. To accurately predict the volume and shape excavated by the waterjet, it is important to understand waterjet fracture mechanisms. There have been various theoretical assumptions and approaches in the literature. In this study, waterjet mechanisms are classified into three standards: a mechanism scale, theoretical assumption for a target material, and jet phase. In addition, through a waterjet experimental study for weathered and intact granitic rocks, a fracture shape is observed and analyzed on comparison with the previous mechanisms. As a result, best waterjet mechanisms are selected to explain the fracture pattern of the granitic rocks.

  • PDF

SQUID와 검출코일의 초전도 결합방식이 개선된 1차 권선형 미분계 시스템 (First-order Wire-wound SQUID Gradiometer System Having Compact Superconductive Connection Structure between SQUID and Pickup Coil)

  • 이용호;유권규;김진목;권혁찬;김기웅;박용기
    • Progress in Superconductivity
    • /
    • 제9권1호
    • /
    • pp.23-28
    • /
    • 2007
  • In order to have a superconductive connection between the wire-wound pickup coil and input coil, typically Nb terminal blocks with screw holes are used. Since this connection structure occupies large volume, large stray pickup area can be generated which can pickup external noise fields. Thus, SQUID and connection block are shielded inside a superconducting tube, and this SQUID module is located at some distance from the distal coil of the gradiometer to minimize the distortion or imbalance of uniform background field due to the superconducting module. To operate this conventional SQUID module, we need a higher liquid He level, resulting in shorter refill interval. To make the fabrication of gradiometers simpler and refill interval longer, we developed a novel method of connecting the pickup coil into the input coil. Gradiometer coil wound of 0.125-mm diameter NbTi wires were glued close to the input coil pads of SQUID. The superconductive connection was made using an ultrasonic bonding of annealed 0.025-mm diameter Nb wires, bonded directly on the surface of NbTi wires where insulation layer was stripped out. The reliability of the superconductive bonding was good enough to sustain several thermal cycling. The stray pickup area due to this connection structure is about $0.1\;mm^2$, much smaller than the typical stray pickup area using the conventional screw block method. By using this compact connection structure, the position of the SQUID sensor is only about 20-30 mm from the distal coil of the gradiometer. Based on this compact module, we fabricated a magnetocardiography system having 61 first-order axial gradiometers, and measured MCG signals. The gradiometers have a coil diameter of 20 mm, and the baseline is 70 mm. The 61 axial gradiometer bobbins were distributed in a hexagonal lattice structure with a sensor interval of 26 mm, measuring $dB_z/dz$ component of magnetocardiography signals.

  • PDF

해양치유시설 계획기준에 관한 연구 (A Study on the Planning Criteria for Thalassotherapy Facility)

  • 이한석;강영훈;성해민
    • 한국항해항만학회지
    • /
    • 제44권1호
    • /
    • pp.20-31
    • /
    • 2020
  • 본 연구는 해양치유시설의 계획기준을 마련하는 연구로서 해양치유시설의 주요 계획항목인 입지선정, 환경계획, 공간계획을 대상으로 한다. 이를 위해 먼저 해양치유시설 특성을 살펴보고 해양치유시설계획의 기초가 되는 치유자원과 치유요법을 조사하며 해양치유시설 관련 해외기준을 분석한다. 이상의 결과를 바탕으로 해양치유시설의 입지선정, 환경계획, 공간계획을 위한 기준을 제시한다. 연구결과 입지선정기준으로는 해안선에서 1km 이내 거리에 위치하고 오염물질 배출시설이 없으며 더위체감지수와 체감온도가 연중 80%이상 '주의' 이하로 유지되는 곳으로 한다. 환경계획기준에서 수질은 국내기준 혹은 ISO 17680 기준 가운데 가장 엄격한 기준으로 하고 공기의 질은 「환경정책기본법」의 대기환경기준치의 60% 수준으로 하며 공기 중 SO2, NO2, O3, PM10 농도는 연간기준초과횟수를 EU기준에 맞도록 하고 소음은 주간 50dB 이하, 야간 40dB 이하로 한다. 공간계획기준은 공간의 특성에 따라 「건축법」의 기준, 건축계획실무기준, 국제기준을 따르도록 한다.

A Consistent Quality Bit Rate Control for the Line-Based Compression

  • Ham, Jung-Sik;Kim, Ho-Young;Lee, Seong-Won
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제5권5호
    • /
    • pp.310-318
    • /
    • 2016
  • Emerging technologies such as the Internet of Things (IoT) and the Advanced Driver Assistant System (ADAS) often have image transmission functions with tough constraints, like low power and/or low delay, which require that they adopt line-based, low memory compression methods instead of existing frame-based image compression standards. Bit rate control in the conventional frame-based compression systems requires a lot of hardware resources when the scope of handled data falls at the frame level. On the other hand, attempts to reduce the heavy hardware resource requirement by focusing on line-level processing yield uneven image quality through the frame. In this paper, we propose a bit rate control that maintains consistency in image quality through the frame and improves the legibility of text regions. To find the line characteristics, the proposed bit rate control tests each line for ease of compression and the existence of text. Experiments on the proposed bit rate control show peak signal-to-noise ratios (PSNRs) similar to those of conventional bit rate controls, but with the use of significantly fewer hardware resources.

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF

비정질 셀레늄층과 비정질 실리콘TFT배열을 사용하는 디지털 X-선 검출기의 영상특성 평가 (Image Quality Evaluation of Digital X-Ray Detector Using Amorphous Selenium Layer and Amorphous Silicon TFT Array)

  • 김창원;윤정기;김종효
    • 한국의학물리학회지:의학물리
    • /
    • 제19권4호
    • /
    • pp.219-226
    • /
    • 2008
  • 이 연구에서는 저자들이 개발한 비정질 셀레늄층과 비정질 실리콘TFT배열을 사용하는 직접방식 디지털 X-선 영상 검출기에 대해 IEC (international electrotechnical commission)와 같은 국제표준으로 권고된 측정방법에 따라 특성을 평가하였다. 영상 성능 묘사에 사용되는 측정은 응답특성(response characteristic), 변조전달함수(MTF, modulation transfer function), 잡음전력스펙트럼(NPS, noise power spectrum), 양자검출효율(DQE, detective quantum efficiency), 양자제한 성능을 포함하고 있다. 영상특성평가 결과, 개발된 검출기의 DQE 값은 최저주파수와 최고주파수에서 각각 40%와 25%이었다. 해외 타사의 제품과 비교해서도 우월한 값을 나타내었다. 또한 MTF는 간접방식 DR, CR과 비교하면 매우 우월한 성능을 보이고 있다. 또한 양자 제한된 특성을 평가한 결과, 0.023 mR 이하에서만 제한된 특성을 보여 일반촬영용도로서 적합성을 확인할 수 있었다.

  • PDF

두가지 피에조 엔진의 사용자 만족도 비교 (A comparative study on the user satisfaction between two different piezoelectric engines)

  • 임현미;이규복;이완선;최소영
    • 구강회복응용과학지
    • /
    • 제33권4호
    • /
    • pp.269-277
    • /
    • 2017
  • 목적: 치과의사의 사용 만족도 비교를 통해 두 가지 피에조 엔진의 성능을 비교평가 하고자 한다. 연구 재료 및 방법: 본 연구에서는 두 가지의 피에조 엔진을 평가하였다:TRAUS XUS10 (Saeshin), PIEZOSURGERY touch (Mectron). 20명의 치과의사가 11개 평가항목에 답하였고, 평가결과는 Likert의 5점 척도를 적용하여 수치화하였다. 핸드피스 소음평가는 10초 동안 5회 측정하여 최고소음을 비교하였다. 핸드피스 발열평가는 세 부위에서 3분동안의 발열량을 측정하였다. 결과: 평가항목 중 '주수펌프 모터의 소음'에서 TRAUS XUS10이 PIEZOSURGERY touch보다 유의하게 만족도가 높았다. 반면, '기능key의 만족도'와 '핸드피스 발열정도'는 PIEZOSURGERY touch가 더 우수했다. 소음 최대값은 TRAUS XUS10이 56.6 dB, PIEZOSURGERY touch는 56.0 dB였다. 두 기기 모두 3분 작동 후 $41^{\circ}C$ 미만의 열을 발생시킴으로써 안전기준을 만족하였다. 결론: TRAUS XUS10는 '기능 key' 및 '핸드피스 발열정도'에서 약간의 개선을 한다면 그 외 대부분의 평가항목에서는 PIEZOSURGERY touch과 견줄만한 성능을 보인다.

AHP기법을 활용한 韓中(한중) 전통마을의 자원중요도 평가항목 비교 (Comparison with Factors of Resource Importance for Traditional Village Between Korea and China Using AHP Method)

  • 임광순;왕애하;김태경
    • 한국전통조경학회지
    • /
    • 제33권3호
    • /
    • pp.95-102
    • /
    • 2015
  • 본 연구는 전통마을 보전과 개발에 적용할 수 있는 자원 평가기준 및 한국과 중국 전문가들 사이에서 나타나는 전통마을 자원 중요도 차이점을 도출하기 위하여 두 나라 관련 전문가를 대상으로 전통마을 자원에 대하여 AHP기반의 설문조사를 실시하였다. 평가항목은 전통마을 자원의 중요도 및 우선순위 도출을 목표로 3계층으로 구분하였다. 분석결과 Level 1에서는 자연자원, Lavel 2에서는 환경자원, 역사자원, 시설자원, Lavel 3에서는 공기, 지형, 전통주택, 농업경관, 공동생활시설, 도농교류활동, 씨족활동 등의 인자가 중요한 것으로 나타났으며, 한국과 중국 두 그룹에서 가장 중요하다고 평가한 인자는 동일하게 나타났다. 평가항목별 종합적인 중요도는 공기, 수질, 소음, 전통주택, 지형, 공동생활시설 등 인자가 한국과 중국 두 그룹에서 상대적으로 중요한 것으로 나타났다. 즉 전통마을은 문화자원요소들을 보전해야 한다는 필연성을 의무처럼 가지고 있지만 질 좋은 자연환경의 관리가 우선적으로 필요하다. 본 연구의 결과는 한국과 중국 전통마을 자원의 중요도에 대한 비교가 되었을 뿐만 아니라 전통마을의 보전과 관리를 위한 자원별 순위와 배점을 산출함으로써 두 나라 전통마을 자원 평가 시 정량적인 데이터 결과를 각각 적용할 수 있는 방안이 될 것으로 기대한다.