• 제목/요약/키워드: Noise property

검색결과 574건 처리시간 0.029초

다채널 영상레이다를 위한 다중대역 송수신기 개발 (Development of the Multi Band Transceiver for Multi-Channel SAR)

  • 김재민;임재환;박지웅;진형석;이현철
    • 한국전자파학회논문지
    • /
    • 제28권2호
    • /
    • pp.97-104
    • /
    • 2017
  • 본 논문에서는 C 대역, X 대역, Ku 대역을 포함하는 다채널 영상레이다를 위한 송수신기를 설계, 제작하고, 전기적인 성능을 검증하기 위한 연구를 수행하였다. 송수신기는 대역별 송신기, 대역별 수신기, 대역별 신호선택기, 고안정발진기, 주파수합성기, 제어기, 전원분배기로 구성된다. 송수신기는 운용모드에 따라 경로 선택 및 수신 대역폭 선택 기능을 가진다. 송수신기는 C, X, Ku 대역 3가지 대역을 모두 송신 및 수신할 수 있으며, 각 대역에서 최대 300 MHz의 대역폭을 가지고, T/R 모듈을 구동시키기에 적합하도록 각 대역별 송수신기 최종 송신 출력은 20 dBm 이상이다. 수신 대역폭은 필요 요구 기능에 따라 모드 선택이 가능하며, 수신 이득은 대역별 C 대역 52 dB, X 대역 50 dB, Ku 대역 60 dB 정도를 가지고 있으며, 잡음 지수는 대역별 H, V 편파에서 Ku 대역 V 편파 최대 4.28 dB의 성능을 보였다. 전기적 성능 시험 결과, 다중대역 송수신기는 다채널 영상레이다에서 요구되는 성능을 만족하였다.

분할영역의 3차원 스캐닝을 이용한 홀로그래픽 비디오 신호의 효율적인 부호화 기술 (An Efficient Coding Technique of Holographic Video Signal using 3D Segment Scanning)

  • 서영호;최현준;김동욱
    • 한국통신학회논문지
    • /
    • 제32권2C호
    • /
    • pp.132-140
    • /
    • 2007
  • 본 논문에서는 디지털화된 형태로 취득 및 저장된 홀로그램 신호를 부호화하는 새로운 기술을 제안한다. 디지털 홀로그램의 독특한 특성을 파악하여 적절한 형태의 데이터로 변환한 후에 현재 널리 사용되고 있는 표준 압축 기술들에 적용하고자 한다. 전처리과정 이후에 부호화를 위해 추출된 홀로그램은 위치적인 다시점 특성을 이용하여 분할된다. 분할된 홀로그램은 2차원의 여러 시점에서 객체를 촬영한 것과 유사한 특성을 보인다. 시각적으로 잡음과 유사한 형태로 관찰되는 홀로그램의 회절 패턴은 그 자체로써 압축에 이용하기 어렵다. 따라서 홀로그램 생성 원리와 유사하면서 고속 변환이 가능한 2차원 DCT (Discrete Cosine Transform)를 이용하여 분할된 홀로그램을 주파수 변환한다. 주파수 변환된 분할 영역들은 시간적 및 공간적 상관도에 따라서 3차원 스캔 과정을 거치면서 하나의 비디오 스트림으로 구성된다. 비디오 스트림의 한 프레임에 해당하는 분할된 영역들은 다양한 범위를 가지는 계수들로 구성되는데 이를 재구성한 후에 부호화 알고리즘을 이용하여 압축한다. 실험 결과를 살펴보면 제안한 알고리즘은 기존의 기술에 비해서 16배 이상의 높은 압축율에서 더 좋은 복원 성능을 보였다.

일반국도의 환경친화성 평가방법론 개발 (Development of Evaluation Method for Environmental Friendly Property in National Highway)

  • 전우훈;이영인
    • 한국도로학회논문집
    • /
    • 제12권3호
    • /
    • pp.87-92
    • /
    • 2010
  • 환경친화적인 도로건설의 개념은 최근에 많이 언급되고 있으나 실제로 측정할 수 있는 방법론이 전무한 실정이다. 특히 환경친화성을 현장에 적용하기 위해서는 계획단계에서 적용할 수 있는 방법론이 개발되어야 한다. 본 연구의 목적은 일반국도의 환경친화성을 평가할 수 있는 방법을 개발하여 현장에 적용할 수 있도록 하는 것이다. 평가지표 개발을 위해 환경영향평가에서 제시하고 있는 총 10개 분야에서 8개의 환경친화성 지표를 선정하였으며, 정성적 평가기법과 정량적 평가기법을 함께 적용하기 위해 정성적 평가방법으로는 계층화분석법(Analytic Hierarchy Process)을 사용하였으며, 정량적 평가방법으로는 일반국도 구간에서 지표에 대한 수치를 적용하였다. 환경친화성 지표선정을 위해 시범적용된 일반국도 구간은 총 10개 구간에 120km의 연장으로 구성되어 있다. 본 연구에서 제시된 평가방법론은 일반국도의 환경에 대한 적용수준을 평가할 수 있으며, 적용에 대한 이해가 쉽고 데이터의 수집이 간편하다. 이러한 방법론을 통해 도로건설시에 환경친화성을 평가하고 보완할 수 있는 도구로 이용이 가능할 것이다. 또한 여러 도로구간들의 환경친화성에 대한 비교를 통해 환경친화성을 높일 수 있는 근거로 사용이 가능할 것으로 판단된다.

초분광 원격탐사 기반 위험·유해물질 톨루엔 탐지 (Detection of Toluene Hazardous and Noxious Substances (HNS) Based on Hyperspectral Remote Sensing)

  • 박재진;박경애;;김태성;이문진
    • 한국지구과학회지
    • /
    • 제42권6호
    • /
    • pp.623-631
    • /
    • 2021
  • 국내외 해상 위험·유해물질(HNS, Hazardous and Noxious Substances) 물동량 증가와 함께 HNS 유출 사고가 빈번히 발생하고 있다. HNS는 전 세계적으로 약 6,000여 종으로 대부분 유독한 성질을 가지므로 이러한 유출 사고 발생은 해양 생태계 파괴를 비롯하여 폭발 및 화재 등으로 인한 인명 및 재산피해를 유발한다. 따라서 해상 HNS 유출 사고를 대비하여 파장에 따른 HNS 분광 라이브러리 구축 및 탐지 알고리즘을 개발해야 한다. 본 연구에서는 프랑스 현지에서 지상 HNS 유출 실험을 진행하였다. 초분광센서 관측을 통해 파장에 따른 톨루엔 라이브러리 스펙트럼을 구축하였으며, 분광혼합 알고리즘을 활용하여 초분광 HNS를 탐지하였다. 전처리 과정으로 주성분 분석을 적용하여 노이즈 제거 및 차원 압축을 수행하였으며, N-FINDR 기법을 통해 영상을 대표하는 톨루엔과 해수의 엔드멤버 스펙트럼을 추출하였다. 스펙트럼 기반의 톨루엔 및 해수의 점유비율을 계산함으로써 모든 픽셀의 HNS 탐지 정확도를 확률로 제시하였다. 최대 탐지 정확도를 가지는 점유비율 선정을 위해 418.15 nm 파장의 복사도 영상과 비교하였으며, 그 결과 약 42%의 비율에서 99% 이상의 정확도를 나타내었다. 해상 HNS 유출은 높은 위험성으로 인해 사람이 쉽게 접근할 수 없는 한계를 지닌다. 본 HNS 실험과정 및 탐지 결과는 초분광 원격탐사에 기반한 HNS 오염 해역 추정에 도움이 될 것이다.

VR 체험 콘텐츠 기술 동향에 관한 연구 (A Study on Technology Trend of VR Experience Contents)

  • 최경호
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제14권8호
    • /
    • pp.513-523
    • /
    • 2020
  • 본 연구는 VR 체험 콘텐츠 기술 동향에 대해 알아보기 위해 현재까지 출원 및 등록된 기술특허를 도출하고, 그 중에서 핵심특허 기술을 중심으로 분석하였다. 2020년 6월까지 공개된 한국, 미국, 일본, 유럽 및 PCT의 특허를 대상으로 하였고, WISDOMAIN 검색 DB를 주요하게 사용하여 특허검색을 실시하였다. 특허검색을 위한 키워드는 가상현실(VR)을 이용한 체험 기술 관련이였으며, 도출한 키워드를 조합하여 검색식을 작성한 후 총 1,013건의 데이터를 얻게 되었다. 그 중에서 유효특허 선별 결과 총 65건의 데이터를 추출하였고, 이를 대상으로 정략분석을 진행하였다. 전체 출원 동향을 살펴보면 한국의 특허 출원이 대부분을 차지하였고, 노이즈 특허는 가상현실(VR) 기술을 구현하기 위한 시스템 관련 장치이다. 미국과 유럽은 증강현실(AR) 기술개발에 집중하고 있는 것으로 나타났다. 가상현실(VR) 체험 기술은 2017년부터 특허 출원이 급격히 증가하였고, 기술 성장단계는 태동기에서 성장기로 넘어가는 시기인 것으로 파악되었다. VR 체험 관련 유효특허를 살펴본 결과 농촌투어, 전시, 교육, 공연 등 다양한 분야에서 기술이 검색되었으며, 콘텐츠 저작과 일반 가상체험 관련 기술에 대한 특허도 검색되었다. 향후 VR 산업의 발전 가능성을 예측해 본다면 더욱 더 다양한 분야에 대한 기술개발과 특허 출원을 진행하여 지식재산권 선점에 대한 대응이 필요할 것으로 판단된다.

철도노선선정에 영향을 미치는 주요환경항목 정량화에 관한 연구 (Study on the Quantitative Analysis of the Major Environmental Effecting Factors for Selecting the Railway Route)

  • 김동기;박용걸;정우성
    • 대한토목학회논문집
    • /
    • 제29권6D호
    • /
    • pp.761-770
    • /
    • 2009
  • 철도는 다른 육상교통수단보다 에너지 효율성이 높은 환경 친화적인 교통수단이다. 예비타당성조사와 철도노선 선정 과정에서 에너지 효율성과 환경에 관한 문제들이 일반적으로 고려되고 있다. 철도노선 선정에서는 지형적인 특성 그리고 시설물의 관리와 운영을 중심으로 선정되고 있다. 철도노선선정에 영향을 미치는 환경관련 문제에 대해서 본 연구는 집중적으로 검토 분석하였다. 본 연구는 철도 및 환경전문가 그리고 철도 노선선정에 관련된 전문가 의견을 검토 분석하여 환경에 영향을 미치는 주요 항목의 가중치를 선정하였다. 환경 친화적인 철도노선을 선정하기 위하여 여러 대안이 비교되어야 하고 각 대안의 평가는 환경성을 검토하여야 한다. 이 문제를 해결하기 위해 본 연구에서는 계층구조를 이용하여 복잡한 문제를 간단하고 객관적으로 결론 내리는데 용이한 AHP 기법을 이용하였다. 이에 따라 전문가에 의한 환경평가항목의 가중치를 기본값으로 정하고 GUI를 활용한 정량화 시스템을 개발하였다.

고속도로 휴게소 환경개선을 위한 기능 증진 방안 연구 - 수도권 휴게소를 중심으로 - (A Study of the Functional Improvement for Comfortable Expressway Service Areas - Metropolitan Expressway Service Areas -)

  • 이원명;한봉호;김종엽;박석철
    • 한국조경학회지
    • /
    • 제43권3호
    • /
    • pp.63-76
    • /
    • 2015
  • 본 연구는 수도권에 설치된 고속도로 휴게소 5개소를 대상으로 휴게소 공간 및 환경 특성, 식재현황을 조사 분석하여 휴게소 조경공간의 문제점과 개선방안을 제시하였다. 공간 및 환경 특성에서는 토지이용, 녹지 배치, 토지피복과 환경영향 요인으로 소음 현황, 분리녹지대 지형 구조를 조사 분석하였다. 식재현황에서는 식재개념, 식재구조, 식생경관을 조사 분석하였다. 토지이용 현황은 건물 등 시설지가 81.6%, 녹지는 18.4%이었으며, 녹지는 경관공간 5.4%, 완충공간 9.1%, 녹음공간 0.7%이었다. 녹지 배치는 분리녹지대, 건물 좌 우측, 진 출입부, 휴게소 건물 후면에 주로 배치되어 있었다. 토지피복 현황으로 평균 불투수포장율은 79.3%, 평균 투수포장율은 20.7%이었다. 소음 측정 결과는 소음원인 고속도로와 휴게소의 배치, 분리녹지대의 유형 및 규격에 따라 차이가 있었다. 식재개념 현황은 경관식재 6.7%, 기타녹지 3.4%, 완충식재 4.6%, 완충+경관식재 2.0%, 녹음식재 1.1%, 경관+녹음식재 0.5%로 조경공간 대부분이 감상을 위한 공간 위주로 조성되어 있었으며, 이용자의 휴식, 위락 공간 등 적극적 이용 가능 공간은 부족하였다. 식재구조는 교목층식재 52.2%, 관목층식재 11.8%, 교목층+관목층식재 9.4%로 대부분 단층구조이었다. 식생경관은 조사지점에 따라 식재밀도, 식재구조, 생육상태의 영향을 받고 있었다. 고속도로 휴게소 환경 개선 방안은 기반환경 개선, 공간기능 개선, 식재기능 개선으로 구분하여 제시하였다. 기반환경 개선은 휴게소 소음 개선을 위한 분리녹지대 기능 강화, 물순환 체계 개선, 비점오염 저감을 위한 시설물 설치를 제시하였다. 공간기능 개선은 휴게공간 접근성 향상을 위하여 건물 좌우측에 조성되는 녹지를 건물 전면에 배치하는 휴게공간 배치 개선과 주차장 내 녹지섬 조성을 통한 열섬현상 완화 및 보행자 안전 확보를 위한 식재 및 조성 방안을 제안하였다. 식재기능에서는 분리녹지대 완충기능 강화를 위하여 다층형 수림대 조성, 외곽녹지 완충기능 확보를 위한 상록교목+낙엽교목+관목층의 식재구조를 제시하였다. 건물 전면과 이용 선호도가 높은 건물 좌측공간에 녹음공간을 조성하고, 주제 설정을 통한 경관공간 식재방안을 제시하였다.

X선 검출 물질의 전극 면적에 따른 신호특성 분석 (Analysis of Signal Properties in accordance with electrode area of x-ray conversion material)

  • 전승표;김성헌;조규석;정숙희;박지군;강상식;한용희;김강수;문치웅;남상희
    • 한국방사선학회논문지
    • /
    • 제4권1호
    • /
    • pp.5-9
    • /
    • 2010
  • 최근 광도전체와 형광체 기반의 디지털 방사선 검출기가 많은 관심을 받고 있으며, 이를 상업화 하기위한 많은 연구들이 이뤄지고 있다. 디지털 방사선 검출기률 제작하는 방법에서 크게 직접변환방식과 간접변환방식이 있다. 본 연구는 기존에 직접변환방식에 널리 사용되어 지고 있는 비정질 셀레늄 (Amorphous seleinum) 기반의 디지털 방사선검출기 보다 좋은 SNR (Signal-to-noise ratio) 동작 특성을 가지는 X선 검출 물질을 제작하여 X선 조사시 두께와 전기장 형성에 따른 차이점올 알아보기 위한 것이다. 본 연구에서는 기존의 진공 증착법이 두꺼운 대면적 필름제조가 어렵다는 문제점을 해결하고자 Screen-Print Method를 이용하여 전도성을 가진 ITO (Indium-tin-oxide)가 코팅 된 유리판에 제작하였다. 본 연구에 사용된 X-선 검출물질로는 다결정 $HgI_2$를 사용하였으며, 시편의 두께를 $150{\mu}m$로 제작하였으며, $3cm{\times}3cm$ 크기로 제작하였다. 상부전극은 Magnetron sputtering system을 사용하여 $3cm{\times}3cm$, $2cm{\times}2cm$, $1cm{\times}1cm$의 크기로 각각 다르게 하여 ITO(Indium-tin-oxide)를 증착 시킨 후, X선 조사시 $HgI_2$ 의 민감도와 누설전류, SNR 등을 측정하여 필름의 전기적 검출 특성을 정량적으로 평가하였으며, I-V테스트는 전류 적분(integration) 모드를 사용하였다. 그 결과 전극의 크기에 따라 신호량 증가 특성을 확인할 수 있었지만 신호량의 증가와 동시에 누설전류 또한 증가함으로써 전극의 크기에 따라 오히려 SNR 특성이 감소됨을 확인하였다. 향후 다양한 두께와 최적의 전극물질을 통해 신호대 잡음비를 개선시키기 위한 연구를 통해 최적화해야 할 것이다.

공기조화, 냉동 분야의 최근 연구 동향 -2000년 및 2001년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research -A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2000 and 2001-)

  • 강신형;한화택;조금남;이승복;조형희;김민수
    • 설비공학논문집
    • /
    • 제14권12호
    • /
    • pp.1102-1139
    • /
    • 2002
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

공기조화, 냉동 분야의 최근 연구 동향 - 1998년 1999년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 1998 and 1999 -)

  • 이재헌;김광우;김병주;이재효;김우승;조형희;김민수
    • 설비공학논문집
    • /
    • 제12권12호
    • /
    • pp.1098-1125
    • /
    • 2000
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

  • PDF