• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.400-410
• /
• 2008

Reduction of structure-borne noise in the compartment of a car is an important task in automotive engineering. Many methods which analyze noise transfer path have been generally used for structure-borne noise. These methods are useful in solving particular problem but do not quantify the effectiveness of vibration isolation for each isolator of a vehicle. To quantify the effectiveness of vibration isolation, the vibrational power flow measurement has been used for a simple isolation system or a laboratory based isolation system. This paper identifies the transfer path of booming noise in a SUV. The powertrain used for test has a in-line 4cylinder engine and 5-shift auto-transmission. This powertrain is transversely supported by four isolators. We calculated the energy flow throughout four isolator by the measurement of power flow and the contribution of energy flow at each isolator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.527-534
• /
• 2004

This study is a paper relating to between road traffic noise(RTN) and sound power level(PWL). At present to prediction of RTN is used to many experimental models and prediction methods. RTN is computed PWL using existing experimental models and prediction methods. Then, computed PWL is compared with it of measurement value, in them, it is selected model most similar to measurement value. And then, this results will watch for make Noise Map, as application field applied to computed results.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1176-1181
• /
• 2010

This paper proposes three positioning algorithms using TOA measurements: 1) The well-known linearization method using Taylor series, 2) a modified Savarese method considering measurement noise, which does not need linearization, and 3) a modified Bancroft method where TOA measurements instead of pseudorange measurements are considered. Furthermore, through an error analysis, for Savarese method, divergence of altitude is anticipated if the transmitters are located at the same height. To prevent height divergence, the Savarese method is modified again for receivers which assumed moving on the even plane. Error analysis also shows the relationship between Bancroft and Savarese method. From the analysis it is expected that the performance of Savarese method is worse than Bancroft method because of error amplification during difference operation. Experiments using real TOA measurement from the time difference of ultra sound and RF validate the proposed methods and show that analysis is correct.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3559-3571
• /
• 2015

This paper addresses the problem of signal acquisition with a sparse representation in a given orthonormal basis using fewer noisy measurements. The authors formulate the problem statement for randomly measuring with strong signal noise. The impact of white Gaussian signals noise on the recovery performance is analyzed to provide a theoretical basis for the reasonable design of the measurement matrix. With the idea that the measurement matrix can be adapted for noise suppression in the adaptive CS system, an adapted selective compressive sensing (ASCS) scheme is proposed whose measurement matrix can be updated according to the noise information fed back by the processing center. In terms of objective recovery quality, failure rate and mean-square error (MSE), a comparison is made with some nonadaptive methods and existing CS measurement approaches. Extensive numerical experiments show that the proposed scheme has better noise suppression performance and improves the support recovery of sparse signal. The proposed scheme should have a great potential and bright prospect of broadband signals such as biological signal measurement and radar signal detection.

• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1072-1082
• /
• 2015

본 논문에서는 스펙트럼 분석기를 이용하여 잡음 파라미터를 측정하는 2가지 방법을 제안하였다. 제안된 첫 번째 방법은 6-포트 회로망을 이용하여 잡음상관행렬을 측정하고, 이를 통해 잡음파라미터를 결정하는 방법이다. 그리고 제안된 두 번째 방법은 전원 임피던스의 변화에 따른 DUT의 잡음지수를 직접 측정하고, 이를 통해 잡음파라미터를 추출하는 방법이다. 전원 임피던스의 변화에 따른 잡음지수를 측정을 위해 스펙트럼 분석기를 이용, 임의의 전원 임피던스를 갖는 DUT의 잡음지수를 측정하는 방법과 전원 임피던스의 변화를 위해 사용한 임피던스 튜너가 DUT에 주는 잡음영향을 제거하는 방법을 보였다. 제안된 2가지의 방법으로 수동 및 능동 DUT에 대한 잡음파라미터를 측정하였고, 이를 비교하였다. 비교 결과, 2가지 방법에 대한 잡음 파라미터 결과가 일치하였다. 2가지 방법의 잡음 파라미터 결과가 일치하는 것은 6-포트 회로망으로 측정된 잡음파라미터가 전원 임피던스의 변화에 따라 측정된 DUT의 잡음지수를 정확히 예측한다는 것을 의미하며, 이를 통해 6-포트 회로망으로 측정된 잡음 파라미터 결과가 검증되었다.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.677-682
• /
• 2006

In the case of aeroacoustic test in windtunnel, measurement accuracy is reduced by not only Doppler effects but also by the microphone self noise due to airflow and high turbulence in the wall boundary layer. Microphone array measurements can be easily utilized for the solutions of these problems. In this paper, geometrical optics approach and diagonal term elimination of cross spectral matrix was introduced to the de-dopplerization and self noise reduction methods for the microphone array measurement. For the validation, beamforming tests for sinusoidal point source were performed in the closed type test section of windtunnel, and their performances of beam width and sidelobe rejection were significantly improved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.822-825
• /
• 2005

In the case of aeroacoustic test in windtunnel, measurement accuracy is reduced by not only Doppler effects but also by the microphone self noise due to airflow and high turbulence in the wall boundary layer. Microphone array measurements can be easily utilized for the solutions of these problems. In this paper, geometrical optics approach and diagonal term elimination of cross spectral matrix was introduced to the de-dopplerization and self noise reduction methods for the microphone array measurement. For the validation, beamforming tests for sinusoidal point source were performed in the closed type test section of windtunnel, and their performances of beam width and sidelobe rejection were significantly improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1857-1859
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the noise suppression methods and the PD measurement results of the in-service substation by the developed UHF PD measurement system which consists of the external UHF coupler, the UWB LNA and the digital storage oscilloscope. As results, it was found that the effect of the noise suppression methods were verified and that the developed external UHF coupler showed a better detection sensitivity than a conventional external coupler.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.617-620
• /
• 2001

The protection of communication lines against harmful effects from electricity lines is very important with the rapid development of communications network. This paper is introduced the reference of noise voltage and the test methods of foreign countries. Further we will also present study measurement equipment for telecommunications noise voltage and circuit noise phenomenon.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.617-620
• /
• 2001

The protection of communication lines against harmful effects from electricity lines is very important with the rapid development of communications network. This paper is introduced the reference of noise voltage and the test methods of foreign coutnreis. Further we will also present study measurement equipment for telecommunications noise voltage and circuit noise phenomenon.