• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.264-268
• /
• 2010

The purpose of this paper is to propose new techniques to match measured optical images by using the edge abstraction method and differentiation method based on image processing technology. To do this, we detect the matching template and non-matching template from each optical image. And then, we detect the edge parts of the overlaped image from comer edge abstraction method and remove noise image. At last, these data are related to applied first-order derivative operator. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1014-1017
• /
• 2007

Sound focusing technologies has been studied for various purposes from early 1990s. As a result, these technologies make us possible to apply in many uses. For example, we can treat tumors using focused ultrasonic waves without surgical knife and communicate in the ocean using time reversal array. Also applications for personal audio system become issues. Recently, as technologies are developing, in some applications, needs for regional focusing become increasing because previously suggested focusing methods, such as phase conjugation, time reversal and inverse filtering, were all about a point focusing. Therefore, studies on regional focusing method are essentially needed. Regional focusing method was firstly mentioned by Choi and Kim in 2002: acoustic contrast control. However, in regional focusing, physical interpretations between control variables and results are still not easy because of its complexity. In this regard, we tried to understand the relations between control variables and results in wavenumber domain and suggested a solution method for regional focusing: wavenumber spectrum matching. We also showed how to make spatially focused sound shape using the suggested method from the simplest case: line focusing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.481-482
• /
• 2008

This investigation presents a method to design an optimal shape of a matching waveguide connecting two waveguides having different impedances. The design objective is to maximize power transmission through the waveguide system. When an incident wave impinges on an elastic waveguide system consisting of waveguides of different impedances, all of the incident wave power may not pass through due to the mechanical impedance. Therefore, the maximization of the transmitted power through a waveguide difficult to achieve without a systematic design method. In this work, the optimal shape design of a matching waveguide connecting two waveguides of different impedances is formulated as a shape optimization problem. If the material of the matching waveguide is given, its shape is the only parameter controlling the transmission power. Relatively simple one dimensional elastic wave transmission problems will be considered in this work, but the underlying methodology and the related physics can be clearly demonstrated. The influences of initial configurations as well as the target frequencies on the optimized shapes will be also investigated.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.730-737
• /
• 2013

In this paper, Constrained One-Bit Transform (C1BT) based motion estimation using extension of matching error criterion is proposed. C1BT based motion estimation algorithm exploiting Number of Non-Matching Points (NNMP) instead of Sum of Absolute Differences (SAD) that used in the Full Search Algorithm (FSA) facilitates hardware implementation and significantly reduces computational complexity. However, the accuracy of motion estimation is decreased. To improve inaccurate motion estimation, this algorithm based motion estimation extending matching error criterion of C1BT is proposed in this paper. Experimental results show that proposed algorithm has better performance compared with the conventional algorithm in terms of Peak-Signal-to-Noise-Ratio (PSNR).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.363-368
• /
• 2009

In the paper, we confirmed improvement Noise figure of the entire RF front-end using spiral inductor with PGS(Patterned Ground Shield) and current bleeding techniques. LNA design is to achieve simultaneous noise and input matching. Spiral inductor in input circuit of LNA inserted PGS for betterment of Q-factor. we modeling inductor using EM simulator, so compared with inductor of TSMC 0.18um. We designed and simulation the optimum structure of PGS using Taguchi's method. We confirmed enhancement of noise figure at LNA after substituted for inductor with PGS. Mixer designed using current bleeding techniques for reduced noise. We designed LNA using inductor with PGS and Mixer using current bleeding techniques, so confirmed improvement of noise figure.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.138-145
• /
• 2016

LLAH(Locally Likely Arrangement Hashing) is a method which describes image features by exploiting the geometric relationship between their neighbors. Inherently, it is more robust to large view change and poor scene texture than conventional texture-based feature description methods. However, LLAH strongly requires that image features should be detected with high repeatability. The problem is that such requirement is difficult to satisfy in real applications. To alleviate the problem, this paper proposes a method that improves the matching rate of LLAH by exploiting together the brightness of features. Then, it is verified that the matching rate is increased by about 5% in experiments with synthetic images in the presence of Gaussian noise.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.276-281
• /
• 2010

A 2.5 V feed-forward second-order deltasigma modulator for audio application is presented. A 9-level quantizer with a tree-structured dynamic element matching (DEM) was employed to improve the linearity by shaping the distortion resulted from the capacitor mismatch of the feedback digital-toanalog converter (DAC). A chopper stabilization technique (CHS) is used to reduce the flicker noise in the first integrator. The prototype delta-sigma analogto-digital converter (ADC) implemented in a 65 nm 1P8M CMOS process occupies 0.747 $mm^2$ and achieves 109.1 dB dynamic range (DR), 85.4 dB signal-to-noise ratio (SNR) in a 24 kHz audio signal bandwidth, while consuming 14.75 mW from a 2.5 V supply.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.313-314
• /
• 2006

Obtained disparity map from the stereo camera by using the several stereo matching algorithms carries lots of noise because of various causes. In our approach, mode filtering and noise elimination technique using the histogram and projection-based region merging methods are adopted for improving the quality of disparity map and image segmentation. The proposed algorithms are implemented in VHDL and the real-time experimentation shows the accurately divided objects.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.56-62
• /
• 2015

The Hausdorff distance is commonly used as a similarity measure between two-dimensional binary images. Since the document images may be contaminated by a variety of noise sources during transmission, scanning or conversion to digital form, the measure should be robust to the noise. Original Hausdorff distance has been known to be sensitive to outliers. Transforming the given image to grayscale image is one of methods to deal with the noises. In this paper, we propose a Hausdorff distance applied to grayscale images. The proposed method is tested with synthetic images with various levels of noises and compared with other methods to show its robustness.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.308-315
• /
• 2010

This study introduces a new technique to estimate modal parameters of a vibrating string using motion pictures. The approach requires two motion pictures for a vibrating string captured simultaneously by typical potable digital cameras or camcorders. Applying the space intersection theory and the space resection theory in photogrammetry, the steroscopic images for the string are constructed from two flat plane pictures. Then the three dimensional displacement components of the string are extracted by a multiple template matching technique. Finally the modal parameters of the string are estimated from the resulting displacement time histories. The accuracy of the approach has been examined through a small-scale mock-up of a string.