• International Journal of Quality Innovation
• /
• v.8 no.3
• /
• pp.188-197
• /
• 2007

In this work, an efficient and easy statistical method to find an equivalent discrete distribution for a continuous random variable (r.v.) is proposed. The proposed method is illustrated by applying it to the treatment of the anthropometrical noise factors in the context of Robust Ergonomic Design.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.279-290
• /
• 2023

Recently, as wind farms using wind power as new and renewable energy have been installed nationwide, noise problems have emerged. The environmental impact assessment and post-environmental impact assessment also require the measurement of background noise and low-frequency noise for wind farms, especially by applying the living noise measurement method according to the low-frequency noise management guidelines issued by the Ministry of Environment in 2018. Due to the nature of wind power generators that generate loud noise in high winds, noise measurement should be made at high winds, but when wind speed increases, wind noise increases and living noise and low-frequency noise are not properly evaluated. Therefore, the type of noise generated by wind power generators was confirmed, and matters to be considered when measuring wind noise such as wind noise were confirmed.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.283-289
• /
• 2010

Recent advance of digital camera results in that image signal processing techniques are widely adopted to railroad security management. However, due to the nature of railroad management many images are acquired in low light level environment such as night scenes. The lack of light causes lots of noise in the image, which degrades image quality and causes errors in the next processes. 3D noise reducing techniques produce better results by using consecutive sequence of images. On the other hand, they cause degradation such as motion blur if there are motions in the sequence. In this paper, we use an adaptive weight filter to estimate more accurate motions and use the result of the adaptive filter to 3D result to improve objective and subjective mage quality.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.680-685
• /
• 2006

The latest trend in the automotive industry demands the development of high stiffness car bodies and the securement of inter-system performance for low vibration and noise vehicles. This demand, however, conflicts with need for light weight design and greater fuel efficiency, thus raising the importance of optimization design to satisfy both developmental goals. We chose two European medium sedans, which has gasoline engine and diesel one, to elucidate the noise characteristics of diesel passenger cars, whose sales have been increasing in both Korea and Europe. In the present study a systematic experiment was conducted to analyze the noise characteristics in diesel cars. we made it possible for differentiating car management according to customer demand while allowing for improved commercial feasibility. it was possible to improve interior noise by 2 dB(A) on average sound pressure level. As a result, by 4% higher on articulation index(AI).

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.90-97
• /
• 2016

The objective of this study is to evaluate the operator's safety for the risk assessment method of impulsive noise division. Literature reviews on the basis of the impulsive noise study, the measuring methods and procedures, based on the results of the analysis process presents a risk assessment methods. In this study, analysis of the MIL-STD-1474D, B-duration graph for the peak noise level to cross the line from the measurement results is limited by the risk retracted. It is possible to determine whether there is quick can be determined whether the risk. Measurement positions measured by the microphone is installed on the risk of applying results are so located within the tolerance impulsive noise in the measurement position can interpret subjective safety is ensured. In addition, Proportional Dose technology was the proposed by the Patterson with the risk assessment method was applied to the indoor-impulsive noise. As results of this study, results for the same value of applying the technique of Proportional Dose technology results calculated by MIL-STD-1474D methods allows 1 count once increased in comparison to the result obtained.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.240-242
• /
• 2005

It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

• Journal of Environmental Health Sciences
• /
• v.39 no.4
• /
• pp.354-359
• /
• 2013

Objectives: The purpose of this study was to investigate exposure levels to K2 rifle noise at a military rifle range among soldiers in training, the left and right ears of shooters, and control managers in the day and night times. Methods: For this study, we visited military rifle ranges and measured the noise of a K2 rifle with a sound level meter (3M Quest SoundPro$^{TM}$) at four different locations with values of Peak (dB(A)) and Max (dB(A)). Results: The highest peak value of impulse noise level averaged 150.4 dB(A), ranging from 149.7 to 150.5 dB(A) at the left-ear side. Impulse noise levels in the daytime were also recorded as higher than during the night. This result was significantly different between daytime and nighttime locations, such as soldier training, right ear of shooter, and control manager (P < 0.001). Conclusion: This study confirmed that there is a need for proper management of impulse noise at military rifle ranges.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.1
• /
• pp.1-20
• /
• 2017

Public library is the most well-used cultural infrastructure, life-long learning space, and social facility within local community. In order to respond to the multi-purpose identities, space structure of many public libraries is changed or reconstructed to open-concept, multi-functional and interconnected areas. Accordingly, the noise issue in public libraries has emerged as one of key environmental parameters and noise management is bound to be considered as a scale for determining whether a user-friendly library. This study measured the noise level of the public libraries in Daegu city, analyzed measurement results on the basis of national and international standards, and suggested the various reduction plans.

• Korean Journal of Occupational Health Nursing
• /
• v.33 no.2
• /
• pp.47-54
• /
• 2024

Purpose: This study aims to identify the level of subjective noise perception among School Meal Facility Workers and analyze the relationship between subjective noise perception and insomnia, as well as the factors affecting insomnia. Methods: School meal facility workers were surveyed from November 1 to December 31, 2021, and 717 people were selected as participants for the study. Using SPSS/WIN 25.0, t-test, x² test, and multiple logistic regression analysis were conducted. The Korean Insomnia Severity Index (ISI-K) was used to evaluate insomnia. Results: The variables that showed significant differences in insomnia in general characteristics, health-related characteristics, subjective health perception, and subjective noise perception of the study participants were mental disorders such as subjective health perception, work stress, depression, etc., gastrointestinal disorders, and subjective noise perception, among which subjective health perception, mental disorders such as depression, and subjective noise perception were analyzed as factors influencing insomnia. Conclusion: To improve the quality of insomnia and sleep among school meal facility workers, there is a need to improve healthcare, emotional management, and noisy work environments.