• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.113-122
• /
• 2016

본 연구에서는, 웨이블릿 노이즈 감쇠에 고속 푸리에 역 변환을 포함하는 방법을 제안한다. 위너 필터링에 인자를 채용하여 역 필터링을 나타내고, 최적의 계수는 전체 평균 제곱 오차를 최소화하도록 선택된다. 위너 필터를 적용하기 위해, 손상된 그림에서 원 화상의 파워 스펙트럼을 계산한다. 위너 필터링은 역 필터링 처리를 포함하기 때문에 블링 필터가 반전되지 않을 때 노이즈는 확장한다. 큰 노이즈를 제거하려면 최고의 웨이블릿 임계값을 사용하여 노이즈를 제거하는 것이다. 웨이블릿 노이즈 감쇠 단계는 역 필터링 및 웨이블릿 기능으로 노이즈 감소로 구성된다. 실험결과는 전체 재생 성능 이상의 다른 방법을 능가하지는 않았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.340-341
• /
• 2010

Noise reduction is an important factor to design low noise sensor array. In this paper three layers of the de-coupler in the conformal sensor array were used to investigate noise reduction. Conformal sensor array is positioned in the layers and the distance from the layer is 0.25cm~1.5cm. Transfer function in the frequency density function is investigated according to the three different positions. When increasing the embedded distance the flow noise decreased in the region of the kx>10.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.229-229
• /
• 2006

WECPNL(Weighted Equivalent Continuous Perceived Noise Level) which designated currently in Domestic 'The Stanrd Method of Measuring Noise and Vibration' is composed of different factor with WECPNL that published in ICAO. Domestic WECPNL is concerned in application of $L_{MAX}$ measurement. On the other hand, ICAO's WECPNL is based on EPNL that includes factors of the pure tone correction and the duration time. NNI and NEF also are each based on PNL and EPNL. Because a military aircraft noise, especially, has the pure tone of high frequency and the irregular duration, it seems to be undesirable to estimate aircraft noise for using Domestic WECPNL. Therefore, this study was performed to detect a flaw of Korean WECPNL, through comparison of the trend of each other aircraft noise index by using equivalent rawdata.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1120-1125
• /
• 2010

In the speech system, for example hearing aid as well as speech communication, speech quality is degraded by environmental noise. In this study, to enhance the speech quality which is degraded by environmental speech, we proposed an algorithm to reduce the noise and reinforce the speech. The minima controlled recursive averaging (MCRA) algorithm is used to estimate the noise spectrum and spectral weighting factor is used to reduce the noise. And partial masking effect which is one of the human hearing properties is introduced to reinforce the speech. Then we compared the waveform, spectrogram, Perceptual Evaluation of Speech Quality (PESQ) and segmental Signal to Noise Ratio (segSNR) between original speech, noisy speech, noise reduced speech and enhanced speech by proposed method. As a result, enhanced speech by proposed method is reinforced in high frequency which is degraded by noise, and PESQ, segSNR is enhanced. It means that the speech quality is enhanced.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1217-1222
• /
• 2013

It is very important to diminish noise source of electric motor systems that are used for home appliance area. We have studied on the noise reduction of BLDC motor, mainly focusing on reducing noise source from cogging torque. This noise source causes resonance of fan & motor systems. This study showed that the higher harmonic component of the cogging torque was the main factor for noise generation. Therefor, to reduce noise of bldc motor for refrigerator, this study suggested peanut shaped magnet which surface flux has similar sinusoidal wave form.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.611-616
• /
• 2013

Nowadays concrete pavement is increasing, since it is more durable than asphalt pavement. And the concrete pavement with lateral rain groove may induce high level of concrete whine noise as pure tone. In this paper, the design factor for good concrete whine noise is considered in view of tire pattern and structure design. In respect of tire pattern design, the tire having a cap tread with high center part stiffness and low shoulder part stiffness shows best concrete whine noise performance. And in respect of tire structural design, the tire with a thick center part of cap tread and low tread part stiffness show best concrete whine noise performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.266-270
• /
• 2006

Noise reduction the noise of a high precision multi-stage gearbox applied at the industrial robot is investigated by experiment such as the modal test and the signal analysis. The signal analysis performed with the waterfall plot representing the power spectrum as a function of the rotating speed. An eccentric load is installed at the gearbox in order to organize similar condition used in the industrial robot. Exciting sources are found out by the waterfall plot, and then the main factor to make the noise is distinguish. For the low-noise gearbox, the gear design parameter is modified and this gearbox is experimented in the same procedure. The results of the test show the noise level of gearbox reduced.

• 접착 및 계면
• /
• 제3권3호
• /
• pp.1-6
• /
• 2002

본 연구에서는 고무 재료의 설계 인자 중 어떤 것이 소음에 주된 영향을 주는지 검토하였고, 저소음 타이어 개발을 위한 고무 재료의 설계 방향을 제시하였다. 소음은 무향실 타이에 소음과 고무 시편의 충격 소음을 측정하였고, 고무 시편의 물성은 경도, 인장 물성 및 동적 점탄성을 측정하였다. 타이어 소음에 영향을 주는 고무 재료의 주된 설계 인자는 경도 또는 300% 모듈러스이고 양자간에는 정의 상관관계가 있다. 따라서 고무 재료의 경도 또는 300% 모듈러스를 낮게 설계하면 소음을 저감시킬 수 있다.

• 한국소음진동공학회논문집
• /
• 제23권11호
• /
• pp.957-965
• /
• 2013

This paper deals with analytical methods for low frequency and high frequency brake squeal noise on brake-rear caliper. In order to improve low frequency and high frequency squeal noise, we take survey caliper bracket shape parameters and housing shape parameters. Besides, using the combination of bracket and housing parameter were surveyed. Thus, using the combination of bracket Alt_05 and housing Alt_45 specifications, instability analysis and brake dynamo test were carried out. Based upon the two models, low and high frequency squeal noise of base model were improved. But, for 6.0 kHz frequency noise, which is not improved, it needs to additionally study on instability analysis and combination of the other brake components.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1413-1419
• /
• 2008

As the improvements of service quality is becoming an important issue the, interior noise level of a train is an important factor of comfortable ride. To reduce the interior noise level, noise sources of the train need to be removed. However, in case with a structure of large scale and multiple noise sources, an estimation of influences of major noise sources, with indentification of its traveling paths needs to be performed. In current state, to improve the interior noise reduction, consideration of sound transmission loss of the train body prior to manufacturing is usually performed. In this study, the sound transmission loss of the train body of new model train of seoul metro's line no.2 under test opeation is measured and modeling of the train body is performed. And train interior noise is predicted using the measured values.