• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1677-1683
• /
• 2015

To cope with exhaust gas regulation, Diesel engine applied to electronic control system. As it accurately regulated the injected fuel mass and the fuel efficiency and the output are increased but the noise and the vibration are decreased. In order to keep the performance of Electronic Diesel Control System, it is important to accurately control the fuel pressure. However, when the regulator of fuel pressure is not controlled properly, the failure phenomenons(starting failure, staring delay, accelerated failure, engine mismatch et al.) occur because the fuel pressure is not stabilize. In this study, effects on a fuel pressure, engine rotating speed according to the control rate of fuel-pressure regulator are investigated in order to analyzed the performance variation with failure of fuel-pressure regulator. As a result, when the control rate of a fuel-pressure regulator is 4%~6% lower than that of standard condition, the variation of engine's rpm and return fuel flow is increased, and the abnormal condition was occurred. Besides, it is possible to diagnose the failures on fuel-pressure regulator under these conditions.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1376-1384
• /
• 2013

In this paper, we propose an automaticdetection method of foreign bodies through template matching in industrial CT volume data. Our method is composed of three main steps. First,Indown-sampling data, the product region is separated from background after noise reduction and initial foreign-body candidates are extracted using mean and standard deviation of the product region. Then foreign-body candidates are extracted using K-means clustering. Second, the foreign body with different intensity of product region is detected using template matching. At this time, the template matching is performed by evaluating SSD orjoint entropy according to the size of detected foreign-body candidates. Third, to improve thedetection rate of foreign body in original volume data, final foreign bodiesare detected using percolation method. For the performance evaluation of our method, industrial CT volume data and simulation data are used. Then visual inspection and accuracy assessment are performed and processing time is measured. For accuracy assessment, density-based detection method is used as comparative method and Dice's coefficient is measured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.119-127
• /
• 2006

In this two-part paper, we consider dynamic resource allocation in orthogonal frequency division multiple access(OFDMA). To reduce the reverse link overhead for channel quality information(CQI) feedback, a set of sub-carriers are tied up to a sub-channel to be used as the unit of CQI feedback, user-multiplexing and the corresponding power/rate allocation. Specifically, we focus on two sub-channel structures, either aggregated or distributed, where the SNR distribution over a sub-channel is modeled as Ricean in general, and the channel quality of a sub-channel is summarized as the mean and variance of channel gain envelop divided by noise standard deviation. Then, we develop a generalized two step channel/resource allocation algorithm, which uses the two statistical measurements, and analyze the spectral efficiency of the OFDMA system in terms of average frequency utilization. An extension to proportional fair algorithm will also be addressed. As confirmed by numerical results, the aggregated structure is preferred especially when intending aggressive link adaptation.

• Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.219-228
• /
• 2002

Based on the five-year (October 1992 through September 1997) Topex/Poseidon altimeter measurements, we describe the statistical characteristics of the eddy variability in the East Sea in terms of sea surface height anomaly, slope variability, and eddy kinetic energy (EKE). The sea surface height anomalies in the East Sea are produced with standard corrections from Topex/Poseidon measurements. In order to eliminate the high frequency noise in the sea surface height anomaly data, the alongtrack height anomaly data was filtered by about 40 km low-pass Lanczos filter based on Strub et al. (1997) and Kelly et a1. (1998). We find that there exists a distinct spatial contrast of high eddy variability in the south and low eddy energy in the north, bordering the Polar Front. In the northwestern area $(north\;of\;39^{\circ}N\;and\;west\;of\;133^{\circ}E)$ from the Polar Front where the eddies frequently appear, the EKE is also considerabel. The high kinetic energy in the southern East Sea reveals a close connection with the paths of the Tsushima Warm Current, suggesting that the high variability in the south is mainly generated by the baroclinic instability process of the Tsushima Warm Current. This finding is supported by other studies (Fu and Zlontnicki, 1989; Stammer, 1997) wh.ch have shown the strong eddy energy coupled in the major current system. The monthly variation of the EKE in both areas of high and low eddy variability shows a strong seasonality of a high eddy kinetic energy from October to February and a relatively low one from March to September. The sequential pattern of wind stress curl shows resemblance with those of monthly and seasonal EKE and the two sequences have a correlation of 0.82 and 0.67, respectively, providing an evidence that wind stress curl can be the possible forcing for the monthly and seasonal variation of the EKE in the East Sea. The seasonality of the EKE also seems to correlate with the seasonality of the Tsushima Warm Current. There also exists the large spatial and interannual variabilities in the EKE.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.449-455
• /
• 2014

Detection of moving objects is a fundamental task in most of the computer vision applications, such as video surveillance, activity recognition and human motion analysis. This is a difficult task due to many challenges in realistic scenarios which include irregular motion in background, illumination changes, objects cast shadows, changes in scene geometry and noise, etc. In this paper, we propose an foreground extraction algorithm based on codebook, a database of information about background pixel obtained from input image sequence. Initially, we suppose a first frame as a background image and calculate difference between next input image and it to detect moving objects. The resulting difference image may contain noises as well as pure moving objects. Second, we investigate a codebook with color and brightness of a foreground pixel in the difference image. If it is matched, it is decided as a fault detected pixel and deleted from foreground. Finally, a background image is updated to process next input frame iteratively. Some pixels are estimated by input image if they are detected as background pixels. The others are duplicated from the previous background image. We apply out algorithm to PETS2009 data and compare the results with those of GMM and standard codebook algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.167-172
• /
• 2000

This paper is aimed at developing an location tracking for mobile station employing currently available mobile communication network of cellular phone and PCS(Personal Communication System). When the location tracking of mobile stations is in services, the services such as Emergency-119, crime investigation, effective urban traffic management or the safety protection of Alzheimer's patients, ran be available. This paper is to track the mobile station in communication network in NLOS environment. To achieve reduction of the standard noise, Kalman filter is used. In terms of the distance, positions are located by using TOA and TDOA methods in the environment that removes NLOS bias in the measured data. And then smoothing method is used. to achieve reduction of the position error values

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.397-406
• /
• 2009

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.1la wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual timing delay in the WAVE multipath fading channels after starting initial timing synchronization. In this paper, the tracking algorithm that synchronizes symbol timing is proposed to continually compensate additional timing delay. Computer simulation of the proposed algorithm is performed in the worst communication environments that apply to maximum timing delay. Computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.71-76
• /
• 2016

Purpose: This study aimed at improving the indoor environment of the office building by measuring the indoor environment and conducting a survey. Method: The measurement was conducted from January 13 to March 16 in 2012, targeting 44 sites in same office building located in Seoul, South Korea. The lists of measurement such as dry-blub temperature, relative humidity, formaldehyde (HCHO), asbestos, carbon monoxide (CO), carbon dioxide (CO2), volatile organic compounds (VOCs) and particle pollution (PM10) were measured. In addition, illuminance which belongs to light environment and noise in sound[acoustical] environment were measured respectively. Result: The buildings showed overall pleasant conditions. In terms of the thermal, air, sound, and visual environment, each measurements were satisfied with the requirements in standard, within pleasant ranges, except several sites. However, the survey results were revealed that the office workers were mostly dissatisfied with their indoor environment. Given that the measured values were mostly within standards, the results of survey might have resulted from a compensation mentality biased toward the subjects in psychological terms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2003

In this paper, we realized a system that converts the character images of the printed Korean alphabet (Hangul) to the editable text documents by using the black and white CCD camera, We were able to abstract the contours information of the character which is based on the structural character by using the boundary tracing technique that is strong to the noise on the character recognition. By using the contours information, we recognized the horizontal vowels and vertical vowels of the character image and classify the character into the six patterns. After that, the character is divided to the unit of the consonant and vowel. The vowels are recognized by using the maximum length projection. The separated consonants are recognized by comparing the inputted pattern with the standard pattern that has the phase information of the boundary line change. We realized a system that the recognized characters are inputted to the word editor with the editable KS Hangul completion type code.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.53-60
• /
• 2005

Recently, sub-micron CMOS technologies have taken the place of III-V materials in a number of areas in integrated circuit designs, in particular even for the applications of gjgabit optical communication applications due to its low cost, high integration level, low power dissipation, and short turn-around time characteristics. In this paper, a four-channel transimpedance amplifier (TIA) array is realized in a standard 0.35mm CMOS technology Each channel includes an optical PIN photodiode and a TIA incorporating the fully differential regulated cascode (RGC) input configuration to achieve effectively enhanced transconductance(gm) and also exploiting the inductive peaking technique to extend the bandwidth. Post-layout simulations show that each TIA demonstrates the mid-band transimpedance gain of 59.3dBW, the -3dB bandwidth of 2.45GHz for 0.5pF photodiode capacitance, and the average noise current spectral density of 18.4pA/sqrt(Hz). The TIA array dissipates 92mw p in total from a single 3.3V supply The four-channel RGC TIA array is suitable for low-power, high-speed optical interconnect applications.