• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.431-436
• /
• 2000

Adaptive feed forward control algorithms based largely upon LMS approach have developed in recent two decades, and they have been widely applied to practical sound and vibration control problems in the case of the reference signal is available. Feedforward control can be applied only when reference signals can be measured or regenerated, while feedback controllers are used to reduce; sound and vibration when reference signals are not available. In recent years, hybrid control schemes in which adaptive feed forward controllers are combined with feedback ones have been studied based on simulations and experiments. The results have shown that the hybrid control may have better control performances in convergence speed and steady state error than the single control schemes. Hybrid control has the advantages of improving stability and performance as well as the disturbance rejection property. However, little effort has been made to the analysis or interpretation of hybrid control systems. In this study, we discussed the feedback controller effects on the stability of feed forward control algorithm in the presence of uncertain error path and a simple example showed that a stable feedback controller could make the feedforward controller unstable. A design criterion of feedback controllers is proposed in order to guarantee the stability of feedforward algorithms in the presence of error paths with uncertainties.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.357-360
• /
• 1998

DS/CDMA system rejected narrow-band interference and additional White Gaussian noise which are occured at multipath, intentional jammer and multiuser to share same bandwidth in mobile communication systems. Because of having not sufficiently obtained processing gain which is related to system performance, they were not effectively suppressed. In this paper, an matched filter channel model using backpropagation neural network based on complex multilayer perceptron is presented for suppressing interference of narrow-band of direct sequence spread spectrum receiver in DS/CDMA mobile communication systems. Recursive least square backpropagation algorithm with backpropagation error is used for fast convergence and better performance in matched filter receiver scheme. According to signal noise ratio and transmission power ratio, computer simulation results show that bit error ratio of matched filter using backpropagation neural network improved than that of RAKE receiver of direct sequence spread spectrum considering of con-channel and narrow-band interference.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1564-1568
• /
• 1987

A design methodology for front ends of a Direct Broadcasting satellite (DBS) Receiver for X-band was reported by utilizing Monolithic Microwave Integrated Circuits (MMIC) technology. The frequency converter including a three-stage low-noise amplifier, a image frequency rejection filter, and a mixer and buffer amplifier was designed by a Home-made CAD program. The results of computer simulation using the CAD program showed that overall gain was over 36.63dB, and noise figure below 2.55dB, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.864-869
• /
• 1993

This paper presents the problem of automatically recognizing embossed or molded characters which are raised from the side wall on rubber tire. In the tire image objects have approximately the same gray-value as the background and because of the tire geometry, illumination of the surface is nonhomogenous. Therefore it is difficult to recognize the raised tire character. In this paper, for describing the process of processing three steps have been proposed: 1) MIN & MAX smoothing operation filter, 2) edge detection algorithm using modified laplacian operator, 3) noise rejection. Afterwards, segmentation is done to attain characters from tire image by projection method. The recognition of the characters in the segmented image is carried out by using multilayered neural network, which is insensitive to the noise.

• 한국정보통신학회논문지
• /
• 제1권1호
• /
• pp.65-70
• /
• 1997

항해 및 군용 장비로써 많이 이용되는 능동형 소나 시스템의 문제점 가운데 하나는 잔향 문제이다. 잔향은 하이드로폰으로부터 송신된 신호가 수면, 해저, 공간으로부터 반사되어 수신단에 입사된 신호를 말한다. 이러한 잔향은 원하는 신호를 수신하는데 장애가 되며 성능 향상을 위해 이들은 제거되어져야 한다. 본 연구에서는 잔향을 제거하기 위한 방법에 대하여 연구하였다. 제안된 방법은 고유 부공간중 신호 부공간과 잡음 부공간이 서로 직교하는 성질을 이용하며, 잡음 부공간을 찾음으로써 잔향을 제거한다. 제안된 방법의 성능을 입증하기 위해 시뮬레이션을 수행하였다.

• 대한전자공학회논문지
• /
• 제9권1호
• /
• pp.25-30
• /
• 1972

일정한 패턴의 디지탈·코오드가 검출될 때 마다 "1"이 송출된것으로 하는 디지탈 데이타 통신을 종래 2,400bit/sec.에 한정되었던 유선전화 케이블에 적용하여 속도를 향상시켰다. 코오드늘 "1"의 연속클라스타를 사용하여 수신단에 홰이스·록크드·루우프를 두어 그 여파부분의 시정수를 키워 PLL 고유의 잡음불감특성을 활용함으로서 에라율이 적으면서도 20kbit/sec.의 속도를 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 춘계학술대회논문집; 영남대학교, 20 May 1994
• /
• pp.22-27
• /
• 1994

본 논문의 목적은 피이드백 제어시스템에서 주기적 외란(periodic disturbances),d$_{\omega}$, 이 출력센서에 감지될 경우, 이를 제거하기 위한 새로운 적응제어기(adaptive controller)를 설계하는 것이다. 2장에서는 주기적 외란을 제거하기 위한 방법으로 많이 사용되어 온 피이드백 제어기 (feedback controller)와 피이드포워드 제어기 (feedforward controller)를 설명한다. 3장에서는 적응 피이드포워드 제어기가 페루프 전달함수를 변경시키는 점에서 피이드백 제어기와 동일함을 보이고, 전달함수를 변경시키지 않아 페루프시스템의 강건성을 저하시키지 않는 효율적인 피이드포워드 제어기를 설계한다. 4장에서는 제안된 피이드포워드 제어기의 학습알고리즘을 유도한다. 5장에서는 모의 실험을 통하여 제안한 피이드포워드 제어기 및 학습 알고리즘의 효율성을 검증하기로 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.172-177
• /
• 2001

This paper proposes an adaptive feedforward controller (AFC) based on LMS for periodic disturbance rejection in active magnetic bearing system. The proposed controller does not alter the stability and robustness of the existing AMB system. It is shown that the control delay due to the eddy current as well as runout and unbalance can be identified and compensated using the estimated displacement from the measured magnetic flux. The simulation results confirm that the proposed scheme successfully identifies and compensates for the runout, unbalance and eddy current effect, leading to a high-precision magnetic bearing system.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.439-448
• /
• 2004

Magnetic bearing is an attractive device in precision engineering field because of its non-contacting nature and controllability of its dynamic characteristics. This paper provides a method of designing a sliding mode control for an active magnetic hearing(AMB) system which is used to support the elevation axis of a target tracking sight instead of mechanical bearings to eliminate the effect of mechanical friction. In such system, the axis should be levitated and supported within a predetermined air gap while AMB is excited by base motion. Experimental results showed that the sliding mode control is effective in disturbance rejection than conventional PID-control without any additive measurements.