• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.68-73
• /
• 2005

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach fur determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권12호
• /
• pp.561-570
• /
• 2015

IT 기술이 급격히 발전함에 따라서 디지털 멀티미디어 장치 및 소프트웨어를 이용한 콘텐츠가 범람하고 있다. 그러나 불법적 목적을 가지고 있는 사용자가 활용함에 따라 이를 이용한 범죄가 증가되고 있고 멀티미디어 포렌식을 통한 콘텐츠의 보호 및 불법 사용 차단의 필요성이 대두되고 있다. 본 논문에서는 센서 패턴 잡음을 이용하여 디지털 영상 획득 장치 판별을 위한 포렌식 기술에 대하여 제안한다. 먼저 광자 탐지기의 빛에 대한 민감도가 불완전해 생기는 센서 패턴 잡음을 검출하기 위한 기술에 대하여 제시한다. 그다음에 참조 영상들에 대하여 센서 패턴 잡음을 추정하고, 검사 영상에 대하여 센서 패턴 잡음을 추정한 후 두 잡음 사이의 유사성 계산을 통하여 디지털 영상을 획득한 장치에 대하여 판별하는 방법을 설명한다. 제안한 기술의 성능 분석을 위하여 DSLR 카메라, Compact 카메라, 스마트폰, 캠코더 등을 포함한 총 10대 장치에 대하여 개발한 알고리즘에 대한 정량적 성능의 분석을 수행하였고, 그 결과 99.6%의 판별 정확도를 달성하였다.

• Journal of Oral Medicine and Pain
• /
• 제11권1호
• /
• pp.19-27
• /
• 1986

Registration of the mandibular movement in patients with temporomandibular joint noise (clicking and/or crepitus) was performed using one of mandibular tracking devices(SAPHON VISI-TRAINER CII,Tokyo Shizai-sha Inc.,Japan). The obtained results were follows : 1. In many cases, the movement pattern of light emitting diode(LED) attached on the mandibular midline showed lateral deviation from a vertical reference line which was pronounced in association with TMJ noise during opening and closing. 2. In patients with unilateral TMJ noise the mandibular midline usually towards the side demonstrating TMJ noise during opening. 3. A distinct V-shaped discontinuity in the trace of velocity of mandibular movement was found at the point of the TMJ noise. 4. In patients with TMJ noise the velocity of mandibular movement at the point of the TMJ noise was decreased rapidly. 5. In several cases, TMJ noise could be eliminated by traning of Rocabado`s control of TMJ rotations.

• 음성과학
• /
• 제6권
• /
• pp.103-117
• /
• 1999

This paper suggests that the onset-coda asymmetry found in languages like Korean and others should be dealt with in terms of one acoustic feature rather than other articulatory features, claiming that the acoustic feature involved here is [noise], i.e., 'aperiodic waveform energy'. It determines the structural well-formedness of the languages in question whether a coda ends in [noise] or not, regardless of the intensity, the frequency, and the time duration of the [noise]. Fricatives, affricates, aspirated stops, tense stops, and released stops are all disallowed in the coda position due to the acoustic feature [noise] they, commonly end with if they were, posited in the coda. The proposal implies that the three seemingly separate prohibitions of consonants in the coda position -- i) no fricatives/affricates, ii) no aspirated/tense stops, and iii) no released stops -- are directly correlated with each other. Incorporation of the one acoustic feature [noise] in the feature theory enables us to see that the aspects of onset-coda asymmetry are derived from one single source: ban, of [noise] in the coda.

• 소음진동
• /
• 제8권1호
• /
• pp.187-194
• /
• 1998

In order to predict the train noise propagation from a level railroad, this paper presents the model of train noise source and the prediction model based on the results by using the sound intensity method. The prediction model gives the effects of geometric attenuation, ground attenuation, and barrier attenuation of noise. There are several principal assumption in developing model: (a) the train noise is primarily rolling noise; (b) the rail head and wheels are in good condition; (c) the height of source is 10cm above track; (d) the directivity pattern of train noise sources is a dipole source. Calculated results based on this model are compared with available field data and good agreement has been obtained.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.194-202
• /
• 2017

In this study, we measured and analyzed electrical noise signals present in devices and systems operated in industrial facilities. Based on the analytic findings, we studied the most effective improvement measures for eliminating such noise signals. Leakage current and ground current generate data interferences in communication systems, and therefore we measured leakage current and ground current. We also measured and analyzed electrical noises in power systems to predict noise pathways and interference routes. Furthermore, we proposed the most effective and reliable improvement measures for blocking off various noise signals and safely eliminating them by improving the internal wiring of the facilities and grounding systems. As a final step, we conducted the proposed improvement measures and confirmed that they helped to improve the operations of the device sand systems in service by re-measuring electrical noise signals and comparing them with those measured before the proposed improvement measures were implemented.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.23-26
• /
• 2011

The aim of this paper is to evaluate noise characteristics of an electric power driven hammer. These investigation and analysis were made according to the ISO 1680/1 and MIL-STD 7410-1 and lead-wrapping experiment method that was used to identify the principal noise sources and analyze its noise. Hammer generates loud noise and it irritates and affects many people. Repeated exposures to loud noise can lead people to permanent hearing loss. Based on the contribution analysis, we confirm that the striker part is a major noise source and it has directional noise radiation pattern, which is left and right.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.403-406
• /
• 2005

The purpose of this paper is to propose ways to remove false color noise (FCN) generated during de-mosaicing on RGB Bayer pattern images. In case of images sensors adapting Bayer pattern color filters array (CFA), de-mosaicing is conducted to recover the RGB color data in single pixels. Here, FCN phenomena would occur where there is clearer silhouette or contrast of colors. The FCN phenomena found during de-mosaicking process appears locally in the edges inside the image and the proposed method of eliminating this is to convert RGB color space to YCbCr space to conduct smoothing process. Moreover, for edges where different colors come together, censoring based smoothing technique is proposed as a way to minimize color blurring effect.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.331-337
• /
• 2001

The purpose of this study is to analyze the principal causes of vibration problem and find out the method of vibration reduction in a chip-mount system. The principal causes are investigated through measurements of vibration spectrum and model parameters. Modal parameters are obtained by using an experimental model test. Based on the model parameters from experiments. a model of finite element method is formulated. The model presents effective redesign of increasing the natural frequencies in order to reduce the vibration of a chip-mount system. Further, through computer simulation for the behavior of head to be main vibration source, the best acceleration pattern of head movement can be verified to achieve effective head-positioning and reduce the vibration due to head movement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.675-680
• /
• 2008

This paper proposes a way to measure the displacement of a multi-point by using a pattern recognition from video signal. Generally in measuring displacement, gab sensor, which is a displacement sensor, is used. However, it is difficult to measure displacement by using a common sensor in places where it is unsuitable to attach a sensor, such as high-temperature areas or radioactive places. In this kind of places, non-contact methods should be used to measure displacement and in this study, images of CCD camera were used. When displacement is measure by using camera images, it is possible to measure displacement with a non-contact method. It is simple to install and multi-point displacement measuring device so that it is advantageous to solve problems of spatial constraints.