• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1491-1497
• /
• 2013

Radio frequency identification (RFID) is an important and essential components of ubiquitous computing, with the development of wireless communication technologies and mobile computing environment. Recently, RFID becomes the mainstream application that helps fast handling and uniquely identifying the physical objects. It utilizes the electromagnetic energy for data transmission from a tag to a reader in the presence of arbitrary interference and noise. In order to employ the portable mobile RFID reader, a tag-collision problem between two or more adjacent tags should be considered. In this paper, we present the operation of RFID system in which numerous tags are present in the interrogation zone of a single reader at the same time. Since there may exist a number of tagged objects in the narrow area, multiple RFID tags may interfere each other, caused to degrade the data reliability and efficiency of the RFID system. In order to suppress interference signals from multiple neighboring tags, we present an application of Gold code for RFID communication system, which uses spread spectrum technique. In this RFID system, data bits are spreaded in each tags with the unique Gold code and the spreaded data bits are despreaded in the reader with the same Gold code. The performance analysis of the considered RFID anti-collision system is illustrated via computer simulation examples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1263-1269
• /
• 2016

Stress has become one of the largest health risk to shorten the life time of health. Accordingly, in order to increase the life time of health, stress relief can be very important. Many social expenses and economic commitment have been inputted for this purpose, but their effectiveness compared to the current situation is not very high. In this paper, we carried out an identification work of rain sound which is similar to the white noise that can stabilize the body and mind of the person by analyzing the variations of 3rd formant frequency bandwidth. Also, for relieving stress, the sounds of rain that is easily accessible at a relatively among the sounds of nature instead of consuming a lot of money and time were selected for solving these problems. In addition, we identified the effectiveness of the stress relief about the sound of rain and research on whether there is a difference between men and women in their 20's or not was performed. Finally, we discussed the personal - adjusted rain making to maximize the effectiveness of stress relief.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.10
• /
• pp.1689-1694
• /
• 2008

The ability to detect Salmonella spp. is essential in the prevention of foodborne illness. This study examined a Salmonella spp. detection method involving the application of immunomagnetic separation and immunoliposomes (IMS/IL) encapsulating sulforhodamine B (SRB), a fluorescent dye. A quantitative assay was conducted by measuring the fluorescence intensity of SRB that was produced from an immunomagnetic bead-Salmonella spp.-immunoliposome complex. The results indicated detection limits of $2.7{\times}10^{5}$ and $5.2{\times}10^{3}$ CFU/ml for Salmonella enterica subsp. enterica serovar Enteritidis (S. Enteritidis) and Salmonella enterka subsp. enterka serovar Typhimurium (S. Typhimurium), respectivley. The signal/noise ratio was improved by using 4% skim milk as a wash solution rather than 2% BSA. In addition, higher fluorescence intensity was obtained by increasing the liposome size. Compared with the conventional plating method, which takes 3-4 days for the isolation and identification of Salmonella spp., the total assay time of to h only including 6 h of culture enrichment was necessary for the Salmonella detection by IMS/IL. These results indicate that the IMS/ IL has great potential as an alternative rapid method for Salmonella detection.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.2
• /
• pp.97-110
• /
• 2012

High performance sensors and modern data logging technology with real-time telemetry facilitate system fault diagnosis in a very precise manner. Fault detection, isolation and identification in fault diagnosis systems are typical steps to analyze the root cause of failures. This systematic failure analysis provides not only useful clues to rectify the abnormal behaviors of a system, but also key information to redesign the current system for retrofit. The main barriers to effective failure analysis are: (i) the gathered data (event) logs are too large in general, and further (ii) they usually contain noise and redundant data that make precise analysis difficult. This paper therefore applies suitable pre-processing techniques to data reduction and feature extraction, and then converts the reduced data log into a new format of event sequence information. Finally the event sequence information is decoded to investigate the correlation between specific event patterns and various system faults. The efficiency of the developed pre-filtering procedure is examined with a terminal box data log of a marine diesel engine.

• Journal of Information Management
• /
• v.36 no.4
• /
• pp.117-136
• /
• 2005

'IT skills framework' provides a common reference model for the identification of the skills needed to develop effective information system making use of information and communications technologies. It is a simple and logical two-dimensional framework consisting of areas of work on axis and levels of responsibility on the other. It uses a common language and a sensible, logical structure that can be adapted for the HRD(human resources development) For example (1) gather labour market intelligence coherently and consistently (2) quantify the skill requirements of the ICT market (3) set up the career path for IT workers and so on.

• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.1
• /
• pp.17-26
• /
• 2012

This paper presents an image processing-based validation method for unrecognizable numbers in severely distorted license plate images which have been degraded by various factors including low-resolution, low light-level, geometric distortion, and periodic noise. Existing vehicle license plate recognition (LPR) methods assume that most of the image degradation factors have been removed before performing the recognition of printed numbers and letters. If this is not the case, conventional LPR becomes impossible. The proposed method adopts a novel approach where a set of reference number images are intentionally degraded using the same factors estimated from the input image. After a series of image processing steps, including geometric transformation, super-resolution, and filtering, a comparison using cross-correlation between the intentionally degraded reference and the input images can provide a successful identification of the visually unrecognizable numbers. The proposed method makes it possible to validate numbers in a license plate image taken under low light-level conditions. In the experiment, using an extended set of test images that are unrecognizable to human vision, the proposed method provides a successful recognition rate of over 95%, whereas most existing LPR methods fail due to the severe distortion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1274-1292
• /
• 2011

Due to the variety of household electric devices and different power consumption habits of consumers at present, general home energy management (HEM) systems suffer from the lack of dynamic identification of various household appliances and a unidirectional information display. This study presented a set of intelligent interconnection network systems for electric appliances, which can measure the power consumption of household appliances through a current sensing device based on OSGi platform. The system establishes the characteristics and categories of related electric appliances, and searches the corresponding cluster data and eliminates noise for recognition functionality and error detection mechanism of electric appliances by applying the clustering algorithm. The system also integrates household appliance control network services so as to control them according to users' power consumption plans or through mobile devices, thus realizing a bidirectional monitoring service. When the system detects an abnormal operating state, it can automatically shut off electric appliances to avoid accidents. In practical tests, the system reached a recognition rate of 95%, and could successfully control general household appliances through the ZigBee network.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.3
• /
• pp.79-88
• /
• 1999

One of the most popular algorithm in adaptive signal processing is the least mean square(LMS) algorithm. The majority of these papers examine the LMS algorithm with a constant step size. The choice of the step size reflects a tradeoff between misadjustment and the speed of adaptation. Subsequent works have discussed the issue of optimization of the step size or methods of varying the step size to improve performance. However there is as yet no detailed analysis of a variable step size algorithm that is capable of giving both the speed of adaptation and convergence. In this paper we propose a new variable step size algorithm where the step size adjustment is controlled by square of the prediction error. The simulation results obtained using the new algorithm about noise canceller system and system identification are described. They are compared to the results obtained for other variable step size algorithm. function.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.817-823
• /
• 2011

This paper introduces an efficient voltage multiplier circuit for improved voltage gain and power efficiency of radio frequency identification (RFID) tags. The multiplier is fully integratable and takes advantage of both passive and active circuits to reduce the required input power while yielding the desired DC voltage. A six-stage voltage multiplier and an ultralow power voltage regulator are designed in a 0.13 ${\mu}m$ complementary metal-oxide semiconductor process for 2.45 GHz RFID applications. The minimum required input power for a 1.2 V supply voltage in the case of a 50 ${\Omega}$ antenna is -20.45 dBm. The efficiency is 15.95% for a 1 $M{\Omega}$ load. The regulator consumes 129 nW DC power and maintains the reference voltage in a 1.1% range with $V_{dd}$ varying from 0.8 to 2 V. The power supply noise rejection of the regulator is 42 dB near a 2.45 GHz frequency and performs better than -32 dB from 100 Hz to 10 GHz frequencies.