• 한국전자파학회논문지
• /
• 제12권2호
• /
• pp.308-315
• /
• 2001

본 논문에서, Feedforward 기법을 이용하여 송신 혼변조 왜곡 신호뿐만 아니라 수신 대역 잡음도 감소시킬 수 있는 새로운 전력 증폭기를 제안했다. 대전력 증폭기는 IMT-2000 기지국 송신 주파수 대역에서 구현되었다. 송신 대역 혼변조 왜곡 신호와 수신대역 잡음 신호는 가변 감쇠기와 위상 천이기, 에러 증폭기의 제어에 의해 감소되어진다. 두 개의 루프, 즉 혼변조 왜곡 신호와 수신대역 잡음 신호제거 루프를 포함하고 있는 제안된 전력 증폭기를 사용하면 송신 대역 통과 여파기의 수신 대역 감쇠 특성을 엄격히 하지 않아도 되어 다양한 무선통신 시스템에서 낮은 송신경로 삽입 손실을 가진 듀플렉서를 제공할 수 있다. 전력 증폭기의 2-tone 실험은 5MHz 주파수 간격을 가진 2.14GHz에서 하였고, 수긴 대역 제거 실험은 중심 주파수가 1.95GHz인 60MHz 수신 전체 대역에서 하였다. 실험 결고, 혼변조 왜곡 제거 성능과 수신 잡음 제거 성능이 각각 31 dB와 21dB이상이었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.66-69
• /
• 2016

본 논문에서는 차세대 4K/8K-UHD 위성 방송용 고화질 영상전송을 고려한 Ka-band 위성 통신 방송용 수신기 저 잡음 하향 변환기의 설계방안을 제시하였다. Ka-band은 Ku-band 보다 대기 중의 감쇄가 크기 때문에 강우에 따른 고화질 전송신호 품질에 대한 보상을 위하여 최저 수신감도의 레벨을 향상시키기 위하여 수신기의 동적영역(Dynamic Range)을 크게 확장하도록 저 잡음하향변환기를 설계 하였다. 수신단에서 비선형 특성을 고려하여 저 잡음정합을 3단 증폭기(LNA), 이미지 제거용 대역통과필터(BPF), 주파수 혼합기(Mixer), 주파수 체배기, IF단을 구성하였으며 수신단의 동적영역에 직접 영향을 미치는 파라미터들 사이에서 최적화 과정을 거쳐 LNB를 설계하였다. 설계된 감쇄-대역 저 잡음 하향변환기는 전체 이득이 58.5~60.7dB이며, 잡음지수는 1.38dB로 매우 우수한 특성을 보이며 국부발진기의 위상잡음은 -63.10dBc@100Hz 특성을 나타내었다.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.544-553
• /
• 2013

In this paper, we propose the pattern classifier of Radial Basis Function Neural Networks(RBFNNs) for diagnosis of 3-phase partial discharge. Conventional methods map the partial discharge/noise data on 3-PARD map, and decide whether the partial discharge occurs or not from 3-phase or neutral point. However, it is decided based on his own subjective knowledge of skilled experter. In order to solve these problems, the mapping of data as well as the classification of phases are considered by using the general 3-PARD map and PA method, and the identification of phases occurring partial discharge/noise discharge is done. In the sequel, the type of partial discharge occurring on arbitrary random phase is classified and identified by fuzzy clustering-based polynomial Radial Basis Function Neural Networks(RBFNN) classifier. And by identifying the learning rate, momentum coefficient, and fuzzification coefficient of FCM fuzzy clustering with the aid of PSO algorithm, the RBFNN classifier is optimized. The virtual simulated data and the experimental data acquired from practical field are used for performance estimation of 3-phase partial discharge pattern classifier.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1112-1119
• /
• 2011

The goal of this study is the stability evaluation of a vacuum pump through modal test and rotor dynamics. Roots type vacuum pump, which is a dry vacuum pump, is necessary for the manufacturing process of the semiconductor and the display. Eigenvalue was solved by the finite-element method(FEM) using 2D and 3D models, then the modal test result was compared with the FEM result. According to the comparison, the analysis result using the 2D was more accurate than the 3D model. Therefore, rotor dynamics was performed by the 2D model. Campbell diagram and root-locus maps, which were calculated by complex-eigenvalue analysis, were used to evaluate the stability of the rotors of the vacuum pump. And displacement solved by unbalance response analysis was compared with the minimum clearance between two rotors of the vacuum pump. Thus, the vacuum pump is assumed operated under steady state through the evaluation of the rotor dynamics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.408-414
• /
• 2014

After drilling operations at the offshore plant to production to crude oil to high pressure. After that time the low pressured of pipe inside when the secondary produce so oil recovery is reduced. At that time injection sea water at the pipe inside through water injection pump that the device Increase recovery so to be research and development at many industry. So developing 3-stage water injection pump at the domestic company. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic. In this paper, a 2D finite element analysis is performed through the dynamics of the present study was the validation of the model.

• 천문학회지
• /
• 제29권1호
• /
• pp.43-51
• /
• 1996

We present test results of time-series CCD photometry to investigate the photometric precision of the BOAO (Bohyunsan Optical Astronomy Observatory) 1.8m telescope. A well-known field of the old open cluster M67, which includes two pulsating blue stragglers and two W UMa type binaries, was monitored for 3.5 hours on February 22, 1996. We have collected 148 V frames and 3 B frames. Photometric noises which consist mainly of photon noise and scintillation noise, were lowered down to about 1.9 mmag for stars of $10.\;^m5$ in M67 with exposure time of 20 seconds. From the C-M diagram for M67, a number of observational properties were derived; E(B-V) = 0.03, (V-Mv)o = 9.6, Age = 4 Gyr. We obtained light curves for four known variable stars and confirmed their variational characteristics. The pulsating blue stragglers show a low amplitude (about 0.01 mag) of light variation.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.974-978
• /
• 2003

WCDMA 디지털 광 중계기용 down-converter를 제작하였다. WCDMA 사업자가 정한 규격에 따라 전체 시스템 블럭도 및 각 블럭들의 규격을 결정하였고, 그 블럭도 및 규격에 따라 down-converter를 설계하였다. 저주파대역 통과 필터, 증폭기, 자동 레벨 제어 감쇠기, 주파수 합성기 등의 주요 모듈을 설계/제작하고, 이들 각 모듈의 연동을 위한 주 기판을 설계/제작하였다. 고주파 신호의 스퓨리어스 잡음 및 시스템의 잡음을 억제할 수 있는 방안을 강구한다. 설계/제작된 RF 시스템의 각 구성 모듈 및 전체 수신부의 성능을 시험하여 설계 사양을 만족함을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.857-864
• /
• 2016

In the present work, vibration analysis of high speed rotary bell cup model for paint atomizer application is carried out through numerical simulation. At first, eight bell cup models, considering four different cup shapes and two different cup diameters, are proposed and corresponding dynamic characteristics are investigated. To evaluate the operating stability, critical speed analysis is conducted using Campbell diagram and separation margin between operating speed and critical speed is identified. Unbalance vibration responses are also studied according to operating speed and balancing quality grade of G. Finally, the stability and adequacy of the proposed bell cup models are discussed for field application.

• 한국소음진동공학회논문집
• /
• 제25권11호
• /
• pp.771-778
• /
• 2015

In this work, vibration characteristics of high speed rotary bell cup for paint atomizer are numerically investigated. New type of bell cup model is proposed and additional corresponding models with design parameter variations for length and diameter are constructed. Dynamic characteristics, such as natural frequencies and corresponding mode shapes, are studied for each model as a first step. To investigate operation stability, critical speed of rotary bell cup is numerically analyzed based on Campbell diagram and separation margin between operating speed and critical speed is identified. Unbalance vibration responses are also investigated with respect to design parameter variation, operating speed and balancing quality grade of G. Then the proper design guideline for stable operation of high speed rotary bell cup for paint atomizer is suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.641-646
• /
• 2008

Long and slender body with or without flexible supports under severe operating condition can be unstabilized even by the small cross flow. Turbulent flow mixer, which actually increases thermal-hydraulic performance of the nuclear fuel by boosting turbulence, disturbs the flow field around the fuel rod and affects dynamic behavior of the nuclear fuel rods. Few studies on this problem can be found in the literature because these effects depend on the specific natures of the support and the design of the system. This work shows how the dynamics of a multi-span fuel rod can be affected by the turbulent flow, which is discretely activated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was established. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.