• 전기학회논문지P
• /
• 제55권1호
• /
• pp.21-25
• /
• 2006

This paper describes the novel control techniques design of VSC(Voltage Sag Corrector) for the purpose of power line quality enhancement. A fast detecting technique of voltage sag is implemented through the detection of instantaneous value on synchronous rotating do-reference frame. The first order digital filter is added in the detection algorithm to protect the insensitive characteristics against the noise. The relationship between the total detection time and cut-off frequency of the filter is described. The size of the capacitor bank used as the energy storage element is designed from the point of view of input/output energy with circuit analysis. Finally, the validity of the proposed scheme is proven through the simulated results.

• 소음진동
• /
• 제7권6호
• /
• pp.1007-1013
• /
• 1997

This paper presents active vibration control scheme of multi-mode forced vibration using piezocetamic sensors and actuators. The control scheme adopted is the Positive Position Feedback (PPF) control. Among various vibration control techniques. PPF control technique makes use of generalized displacement measurements to accomplish the vibration suppression. Two independent controllers are implemented to control the first and the second modes of the beam under external excitation. Experimental results for various damping ratios and feedback gains of the PPF controllers are compared with respect to the contorl efficiency. The results indicate that steady state vibration under wide band excitation can be controlled effectively when multiple sets of PZT sensors and actuators were used with PPF control technique.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.241-246
• /
• 2016

This paper presents a method that can improve the performance of permanent magnet synchronous motor current control by minimizing the measured current phase delay caused by the Low Pass Filter(LPF) used to cut off the noises that flowed in when feedback currents are measured. Although existing methods that change the Cutoff Frequency of the LPF can minimize phase delays during high speed rotations, their noise cutoff effects are much lower and this may lead to the decline of control performance. Therefore, in this study, an algorithm that can compensate current phase delays through relatively simple calculations from the synchronous motor d-q axis coordinate transformation matrix and the inverse transformation matrix is proposed and the validity of the proposed method is verified by comparing the waveform of the calculated current with the waveform of actual currents through simulations and experiments.

• 한국유체기계학회 논문집
• /
• 제6권2호
• /
• pp.15-22
• /
• 2003

Comprehensive study on a centrifugal blower for air-purifier involving a few physical filters for percolation process has been accomplished for an optimal design of the air handling system. The filtering media causes a flow resistance for induced flows by a rotating impeller. The present methodology is to adopt PIV system for velocity measurements and wind tunnel connected with an anechoic chamber for total performance test of the blower. Trial prototypes for the blades of a rotor and casing are presented for satisfaction of both flow rate and noise level set by design objectives. Tapered blades with a special casing for a fan show good performance data. The results of velocity fields also explain the reason of improvements of the blower performance.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1995년도 제12회 음성통신 및 신호처리 워크샵 논문집 (SCAS 12권 1호)
• /
• pp.221-224
• /
• 1995

In speech signal processing, it is necessary to detect exactly the pitch. The algorithms of pitch extraction with have been proposed until now are difficult to detect pitches over wide range speech signals. In this paper, thus, we proposed a new pitch detection algorithm that used a low pass filter with variable bandwidth. It is the method that preprosses to find the first formant of speech signals by the FFT at each frame and detects the pitches for signals LPFed with the cut off frequency according to the first formant. Applying the method, we obtained the pitch contours, improving the accuracy of pitch detection in some noise environments.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.125-131
• /
• 1994

This paper describes a method to measure the distortion level of loudspeaker using a LMS(Least Mean Square) adaptive filter. Conventional technique to measure the distortion level uses a band-pass filter with a sharp cut-off frequency characteristics. However. such the band-pass filter has a bed time response characteristics. On the other hand, the proposed method offers us an easy way to measure the specified harmonic distortion level with a small hardware. Moreover, our method is not affected by noise which has no correlation with the test signal, and the measurement can be carried out in a noisy environment. The effectiveness of the proposed method is confirmed by experiment using a loudspeaker in a noisy room.

• 한국통신학회논문지
• /
• 제14권1호
• /
• pp.11-21
• /
• 1989

본 논문에서는 디지털 신호처리를 이용한 가우시안 저역필터, 위상적분회로, D/A변환기와 보조회로를 사용하여 GMSK변조기를 구현하였다. 가우시안 기저대역 필터의 차단주파수 BbT를 변화시켜 비교적 좁은 전력스펙트럼을 관측하였다. 복조방식은 변별기방식을 사용하였고, Rayleigh fading조건과 가산성 백색 가우시안 잡음 조건에서 16Kbps의 의사랜덤 신호를 전송했을 때 BER 값의 이론치와 실험치를 비교하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1970-1976
• /
• 2009

This paper describes a series arc detection algorithm in a low-voltage wiring system. We designed and fabricated an arc detection circuit which consists of a high-pass filter with the low cut-off frequency of 170 kHz to attenuate power frequency. The series arcing phenomena was simulated by an arc generator specified in UL1699. In the experiment, various loads such as resistive loads, resistive loads controlled by a dimmer, and vacuum cleaners were used. Whether the signal is arc or noise is discriminated by pulse counts and periodicity of the detected signal.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.777-782
• /
• 2005

In this paper, we designed and fabricated a partial discharge (PD) detector to diagnose the soundness of CNCV cables by analyzing PD pulses and to predict discharge locations. The PD detector is consisted of a coupling network with a discharge free capacitor and a detection impedance, a voltage follower and a low noise amplifier. Lower cut-off frequency of the detector is adjusted at 175kHz to block AC voltage and to pass discharge pulse only. The discharge location could be obtained by the time of arrival method using travelling wave propagation theory. In a laboratory test on an eighty meter CV cable, we could position the discharge location within a two meter error.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1641-1646
• /
• 2013

기저대역 채널선택 필터는 외부의 잡음이나 공정상의 변화에 따라 각각의 통신 채널을 선택하기 위해 인가되는 제어 전압이 변동될 수 있다. 본 논문에서는 제어 전압을 일정하게 유지시키기 위해, 전류의 흐름을 감지하여 채널선택 필터의 차단주파수가 자동으로 조정되어 필터 동작이 원활하게 유지되면서 최소 면적을 갖는 전류 비교 방식 전압 안정화 회로를 설계하였다.