• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1695-1700
• /
• 2005

In this paper, we propose an optimal thresholding method for the voxel coloring in the reconstruction of a 3D shape. Our purposed method is a new approach to resolve the trade-off error of the threshold value on determining the photo-consistency in the conventional method. Optimal thresholding value is decided to compare the surface voxel of photo-consistency with inside voxel on the optic ray of the center camera. As iterating the process of the voxels, the threshold value is approached to the optimal value for the individual surface voxel. And also, graph cut method is reduced to the surface noise on eliminating neighboring voxel. To verify the proposed algorithm, we simulated in the virtual and real environment. It is advantaged to speed up and accuracy of a 3D face reconstruction by applying the methods of optimal threshold and graph cut as compare with conventional algorithms.

• 대한음성학회지:말소리
• /
• 제45호
• /
• pp.1-14
• /
• 2003

This paper criticizes S. Kim (1992), claiming that the perception of place cues in the reduced stop consonant clusters ('reducing' means 'cutting off' the acoustic silence in stop clusters) largely depends on the acoustic characteristics such as formant transition and noise frequency distribution of stop burst, rather than the closure duration time as advocated by S. Kim (1992). The claim is based on the perception test conducted upon 111 stimuli over 10 subjects. The finding is that, when the closure duration is cut off up to the point where only one stop is perceived, place of the second stop, not the first one, in the cluster is in most cases perceived regardless of the places of the first and second stops. It is likely that the place cues of the stop in the prevocalic position mask those in the postvocalic position.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.386-391
• /
• 1998

The effect of the changes in parameter angles(precone, droop, sweep) on the lead-lag damping was focused on. Experiment was made with hingeless 4-blade rotors and NACA 0012 airfoil. For the measurement of the rotating natural frequencies and lead-lag damping, non-rotating swash plate was oscillated at the regressing lag mode frequency and the data were acquired after the excitation was cut off. Analysis was made using a finite element formulation based on Hamilton's principle. The main blade is assumed as elastic beams. Quasi-steady strip theory is used to obtain aerodynamic forces, and non-circulatory forces are also included.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.317-323
• /
• 2007

Non-contact underwater explosions against surface ships could cause extensive equipment damage and render the ship inoperative. As an analytical method, DDAM(dynamic design and analysis method) is used for ship shock design. In this paper, in order to verify the finite element model of large shipboard equipment, modal test of equipment was performed. Major objective of this paper is to describe shock analysis methodology for large shipboard equipment attacked to the top and bottom foundations.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.462-471
• /
• 1989

제안된 국부적응 2차원 변화율 메디안 필터는 변화율의 추정치에 의해 필터를 출력 방법을 결정하여 경계를 손상시키지 않고 잡음을 제거하는 효과를 가진 4가지의 알고리즘으로서 Subfilter Size를 변형하면 Corner를 복원할 수 있고 평균 Subfilter 대신 중앙연상르 취하면 완벽한 Cornoer 복원이 된다. 실 영상에 적용하여 알고리즘의 성능이 경계를 흐리지 않고 잡음의 영향을 감소하는 효과를 확인하였다.

• 한국유체기계학회 논문집
• /
• 제13권2호
• /
• pp.18-23
• /
• 2010

This paper presents a procedure for the aerodynamic and aeroacoustic characteristics of a sirocco fan. For the aerodynamic and aeroacoustic analyses of the sirocco fan, three-dimensional steady and unsteady Reynolds-averaged Navier-Stokes equations are solved with a shear stress transport turbulence model for turbulence closure. The flow analyses were performed on a hexahedral grid using a finite-volume solver. The validation of the numerical results is performed by comparing with experimental data for the pressure, efficiency and power. The internal flow analyses of the sirocco fan are performed to understand the unstable flow phenomenon on the casing for the wall pressure and internal flow characteristics at each position. It was found that fluctuation of pressure and locally concentrated noise source are observed near the cut-off and expansion regions of the casing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.490-495
• /
• 2001

This paper deals with an analysis and countermeasure for improving the shock performance of laptop computers. The shock analysis is carried out by using the commercial program of LS-DYNA3D. Also the analysis is verified by the measurements from modal tests and shock tests. The available countermeasures are investigated theoretically and experimentally to find the effective methods of reducing the shock acceleration on hard disk driver during one side fall test. The hard disk drive is the most sensitive part in a laptop computer. This research shows the effects of the spring constant of rubber pad, the reinforcement of mechanical parts and the location of a hard disk driver, on the shock reduction.

• 소음진동
• /
• 제8권1호
• /
• pp.122-131
• /
• 1998

Internal and external acoustic fields of the engine inlet are calculated by using a finite element method. The far fields non reflecting boundary condition is enforced by using a wave envelope element, which is a kind of infinite element. The geometry is assumed an axisymetric duct. Sources of the fan are modeled by the Tyler and Sofrin's theory. Effects of uniformly moving medium are considered. A pulsating sphere and an oscillating piston problem are calculated to verify the external problems, and compared with exact solutions. When the wave envelope element is applied at the far boundary, the calculated finite element solutions show good agreements with the exact solutions. The engine inlet is solved with the combined internal and external grid. The cut-off phenomena on engine inlet duct are observed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1887-1891
• /
• 2008

In this paper, we dealt with a partial discharge (PD) measurement method that has been accepted as an effective and non-destructive technique to estimate insulation performance of low-voltage induction motors. The PD measurement system consists of a coupling network, a low noise amplifier, and associated electronics. A shielded box was used to reduce environmental noise. Frequency characteristic of the coupling network was estimated by a sinusoidal signal input, and the low cut-off frequency of the coupling network was 1 MHz (-3 dB). Also, we carried out a calibration test for the PD measurement system. Sensitivity of the system was of 84 m$V_{max}$/pC between stator winding and enclosure. In application test on a low-voltage three phase induction motor (5 HP), we could detect 88 pC at AC 800 $V_{max}$.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.639-645
• /
• 1992

Effects of additives on electromagnetic properties of a Ni-Cu-Zn ferrite for a noise filter in high frequency regions were studied. Both resistivity and permeability were increased with the amount of Mn2O3 up to 1wt%, then decreased with further addition. Addition of Co2O3 decreased the permeability of the ferrite and shifted the resonance frequency to a higher frequency region, which was thought due to the stabilization of domain walls. Therefore it was possible to improve both the permeability and the loss and to control the cut-off frequency by the concurrent addition of Mn2O3 and Co2O3.