• Journal of Chest Surgery
• /
• v.41 no.1
• /
• pp.68-73
• /
• 2008

Background: The presence of infiltrated mediastinal lymph nodes is a crucial factor for the prognosis of lung cancer. The aim of our study is to investigate the pattern of metastatic non-small cell lung cancer that spreads to the mediastinal lymph nodes, in relation to the primary tumor site, in patients who underwent major lung resection with complete mediastinal lymph node dissection. Material and Method: We retrospectively. studies 293 consecutive patients [mean age $63.0{\pm}8.3$ years (range $37{\sim}88$) and 220 males (75.1%)] who underwent major lung resection due to non-small cell lung cancer from January 1998 to December 2005. The primary tumor and lymph node status was classified according to the international TNM staging system reported by Mountain. The histologic type of the tumors was determined according to the WHO classification. Fisher's exact test was used; otherwise the chi-square test of independence was employed. A p-value < 0.05 was considered significant. Result: Lobectomy was carried out in 180 patients, bilobectomy in 50, sleeve lobectomy in 10 and pnemonectomy in 53. The pathologic report revealed 124 adenocarcinomas, 138 squamous-cell tumors, 14 adenosquamous tumors, 1 carcinoid tumor, 8 large cell carcinomas, 1 carcinosarcoma, 2 mucoepidermoid carcinomas and 5 undifferentiated tumors. The TNM stage was IA in 51 patients, IB in 98, IIB in 41, IIIA in 71, IIIB in 61 and IV in 6. 25.9 % of the 79 patients had N2 tumor. Most common infiltrated mediastinal lymph node was level No.4 in the right upper lobe, level No. 4 and 5 in the left upper lobe and level No. 7 in the other lobes, but no statistically significant difference was observed. Thirty-six patients (12.3%) presented with skip metastasis to the mediastinum. Conclusion: Mediastinal lymph node dissection is necessary for accurately determining the pTNM stage. It seems that there is no definite way that non-small cell lung cancer spreads to the lymphatics, in relation to the location of the primary cancer. Further, skip metastasis to the mediastinal lymph nodes was present in 12.3% of our patients.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.241-248
• /
• 2002

With the structure of tilde-area computing system which Is specified by a researching team in Vrije University, Netherlands, lots of researchers and developers have been progressing the studies of global location and interconnection services of distributed objects existing in global sites. Most of them halve focused on binding services of only non-duplicated computational objects existing wide-area computing sites without any consideration of duplication problems. But all of objects existing on the earth rave the duplicated characteristics according to how to categorize their own names or properties. These objects with the same property can define as duplicated computational objects. Up to now, the existing naming or trading mechanism has not supported the binding services of duplicated objects, because of deficiency of independent location service. For this reason, we suggest a new model that can not only manages locations of duplicated objects In wide-area computing environments, but also provide minimum binding time by considering both the optimal selection of one of duplicated objects and load balance among distributed systems. Our model is functionally divided into 2 parts, one part to obtain an unique object handle of duplicated objects with same property as a naming and trading service, and the other to search one or more contact addresses by a node manager using a liven object handle, as a location service For location transparency, these services are independently executing each other. Based on our model, we described structure of wide-area integrated tree and algorithms for searching and updating contact address of distributed object on this tree. finally, we showed a federation structure that can globally bind distributed objects located on different regions from an arbitrary client object.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.45-54
• /
• 2012

Location-based services with GPS positioning technology as a key technology, but recognizing the current location through satellite communication is not possible in an indoor location-aware technology, low-power short-range communication is primarily made of the study. Especially, as Chirp Spread Spectrum(CSS) based location-aware approach for low-power physical layer IEEE802.15.4a is selected as a standard, Ranging distance estimation techniques and data transfer speed enhancements have been more developed. It is known that the distance measured by CSS ranging has quite a lot of noise as well as its bias. However, the noise problem can be adjusted by modeling the non-zero mean noise value by a scaling factor which corresponds to the change of magnitude of a measured distance vector. In this paper, we propose a localization system using the CSS signal to measure distance for a mobile node taken a measurement of the exact coordinates. By applying the extended kalman filter and least mean squares method, the localization system is faster, more stable. Finally, we evaluate the reliability and accuracy of the proposed algorithm's performance by the experiment for the realization of localization system.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.499-511
• /
• 2009

As the demand of the consumer for high-sense clothing, relation with materials is becoming important even in clothing construction. Especially, the cutting angle of materials is becoming an crucial element in the formation of silhouette, and drape of Hem line, of skirts. Accordingly, in this study, Hem line shapes between real clothing and 3D virtual clothing of "i-Designer" were analyzed by manufacturing semi-flare skirts of polyester 100% according to a cutting angle, and the results are as follows. As a result of comparison of silhouette between the real clothing and the virtual clothing, the real and the virtual have a similar feeling regardless of a cutting angle. In case of drape shapes, both the front and the lateral side were represented in almost similar shapes. The back side, however, the real and the virtual showed a great difference in case of grain direction. And in the whole silhouette, the real and the virtual were represented similarly. It could be known that with regard to Hem-line drape shapes between the real clothing and the virtual according to a cutting angle, the real clothing is represented in a location farther from the body than the virtual clothing and, the location or number of node was similarly showed in the real and the virtual.

• Advances in nano research
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2020

In this work, the electrical potential (EP) technique with an artificial neural networks (ANNs) for monitoring of nanostructures are used for the first time. This study employs an expert system to identify size and localize hidden nano-delamination (N.Del) inside layers of nano-pipe (N.P) manufactured from Basalt Fiber Reinforced Polymer (BFRP) laminate composite by using low-cost monitoring method of electrical potential (EP) technique with an artificial neural networks (ANNs), which are combined to decrease detection effort to discern N.Del location/size inside the N.P layers, with high accuracy, simple and low-cost. The dielectric properties of the N.P material are measured before and after N.Del introduced using arrays of electrical contacts and the variation in capacitance values, capacitance change and node potential distribution are analyzed. Using these changes in electrical potential due to N.Del, a finite element (FE) simulation model for N.Del location/size detection is generated by ANSYS and MATLAB, which are combined to simulate sensor characteristic, therefore, FE analyses are employed to make sets of data for the learning of the ANNs. The method is applied for the N.Del monitoring, to minimize the number of FE analysis in order to keep the cost and save the time of the assessment to a minimum. The FE results are in excellent agreement with an ANN and the experimental results available in the literature, thus validating the accuracy and reliability of the proposed technique.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1436-1442
• /
• 2004

A shared-based tree established by the Core Based Tree multicast routing protocol (CBT), the Protocol Independent Multicast Sparse-Mode(PIM-SM), or the Core-Manager based Multicast Routing(CMMR) is rooted at a center node called core or Rendezvous Point(RP). The routes from the core (or RP) to the members of the multicast group are shortest paths. The costs of the trees constructed based on the core and the packet delays are dependent on the location of the core. The location of the core may affect the cost and performance of the shared-based tree. In this paper, we propose three methods for selecting the set of candidate cores. The three proposed methods, namely, k-minimum average cost, k-maximum degree, k-maximum weight are compared with a method which select the candidate cores randomly. Three performance measures, namely, tree cost, mean packet delay, and maximum packet delay are considered. Our simulation results show that the three proposed methods produce lower tree cost, significantly lower mean packet delay and maximum packet delay than the method which selects the candidate cores randomly.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2010

In this paper, we propose for improving QoS in wireless micro cellular network using Cellular-IP/PRC(Paging Route Cache) with Paging Cache and Route Cache in Cellular-IP and propose for performance of realtime and non-real time handoff service using Handoff state machine Paging Route Cache. Although the Cellular-IP/PRC technology is devised for mobile internet communication, it bas its vulnerability in frequent handoff environment. On the other hand, Cellular IP combines the capability of cellular networks to provide high performance handoff and efficient location management of active and idle mobile users with the inherent flexibility, robustness and scalability found in IP networks. Also Cellular-IP/PRC use semi-soft handoff. During semi-soft hand off a mobile host may be in contact with either of the old and new base stations and receive packets from them. Packets intended to the mobile node are sent to both base stations and buffered, so when the mobile host eventually moves to the new location it can continue to receive packets without interruption. It should be suitable for realtime service such as multimedia traffic. But, much waste of resource will occur in this method, especially for non-real time services such as FTP and E-mail. Therefore, a new algorithm that performs different handoff according to characteristic of each traffic by use of reserved field in IP packet is proposed in this thesis. This hand off state machine using differentiated handoff improves quality of services in Cellular-IP/PRC. Suggested algorithm shows better performance than existing technology in wireless mobile internet communication environment. Matlab simulation results are improving QoS, show call drop and call blocking provided to Paging Router Cache during handoff state machine in Cellular-IP/PRC.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.975-991
• /
• 2014

The objective of this study is to develop a reliable method for locating cracks in a beam using data fusion of fractal dimension features of operating deflection shapes. The Katz's fractal dimension curve of an operating deflection shape is used as a basic feature of damage. Like most available damage features, the Katz's fractal dimension curve has a notable limitation in characterizing damage: it is unresponsive to damage near the nodes of structural deformation responses, e.g., operating deflection shapes. To address this limitation, data fusion of Katz's fractal dimension curves of various operating deflection shapes is used to create a sophisticated fractal damage feature, the 'overall Katz's fractal dimension curve'. This overall Katz's fractal dimension curve has the distinctive capability of overcoming the nodal effect of operating deflection shapes so that it maximizes responsiveness to damage and reliability of damage localization. The method is applied to the detection of damage in numerical and experimental cases of cantilever beams with single/multiple cracks, with high-resolution operating deflection shapes acquired by a scanning laser vibrometer. Results show that the overall Katz's fractal dimension curve can locate single/multiple cracks in beams with significantly improved accuracy and reliability in comparison to the existing method. Data fusion of fractal dimension features of operating deflection shapes provides a viable strategy for identifying damage in beam-type structures, with robustness against node effects.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.207-214
• /
• 2011

In this paper, using Zigbee-based wireless sensor networks and Lego MindStorms NXT robot, a remote monitoring and navigation system for mobile robot has been developed. Mobile robot can estimate its position using encoder values of its motor, but due to the existing friction and shortage of motor power etc., error occurs. To fix this problem and obtain more accurate position of mobile robot, a ultrasound module on wireless sensor networks has been used in this paper. To overcome disadvantages of ultrasound which include straightforwardness and narrow detection coverage, we rotate moving node attached to mobile robot by $360^{\circ}$ to measure each distance from four fixed nodes. Then location of mobile robot is estimated by triangulation using measured distance values. In addition, images are sent via a network using a USB Web camera to smart phone. On smart phones we can see location of robot, and images around places where robot navigates. And remote monitoring and navigation is possible by just clicking points at the map on smart phones.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.127-136
• /
• 2002

This papers presents a practical damage detection algorithm based on damage index method that accurately assesses both the location and severity of the localized detriment in a bridge structure using only limited mode shapes. In the algorithm, the ratio of the modal vector sensitivity of an undamaged structure to that of a damaged structure is used as an indicator of damage. However, a difficulty arises when the damaged element is located at a node of mode where the amplitude of medal vector is close to zero, leading the singularity of the ratio (i.e., division-by-zero). This singularity problem is overcome by introducing a parameter denoted a sensitivity filter, a function of mode shape of the structure, in modal vector sensitivity. Using this concept, an improvement can be considerably achieved in the estimation of both degree of severity and location of damage. To verify the proposed algorithm, its numerical implementations are conducted for a simply supported beam and a 2-span continuous beam.