• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.75-82
• /
• 2020

PURPOSE. The aim of this study was to investigate the shear bond strength of luting cements used with implant retained restorations on to titanium specimens after different surface treatments. MATERIALS AND METHODS. One hundred twenty disc shaped specimens were used. They were divided into three groups considering the surface treatments (no treatment, sandblasting, and oxygen plasma treatment). Water contact angle of specimens were determined. The specimens were further divided into four subgroups (n=10) according to applied cement types: polycarboxylate cement (Adhesor Carbofine-AC), temporary zinc oxide free cement (Temporary CementZOC), non eugenol provisional cement for implant retained prosthesis (Premier Implant Cement-PI), and non eugenol acrylic-urethane polymer based provisional cement for implant luting (Cem Implant Cement-CI). Shear bond strength values were evaluated. Two-way ANOVA test and Regression analysis were used to statistical analyze the results. RESULTS. Overall shear bond strength values of luting cements defined in sandblasting groups were considerably higher than other surfaces (P<.05). The cements can be ranked as AC > CI > PI > ZOC according to shear bond strength values for all surface treatment groups (P<.05). Water contact angles of surface treatments (control, sandblasting, and plasma treatment group) were 76.17° ± 3.99, 110.45° ± 1.41, and 73.80° ± 4.79, respectively. Regression analysis revealed that correlation between the contact angle of different surfaces and shear bond strength was not strong (P>.05). CONCLUSION. The retentive strength findings of all luting cements were higher in sandblasting and oxygen plasma groups than in control groups. Oxygen plasma treatment can improve the adhesion ability of titanium surfaces without any mechanical damage to titanium structure.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.8.1-8.9
• /
• 2022

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.569-576
• /
• 2002

This study was peformed to evaluate the interfacial shear bond strength of base (direct and indirect) and repair composites with aging and surface treatment methods. Direct composite resin specimens ($Charisma^{\circledR}$, Heraeus Kulzer, Germany) were aged for 5 min, 1 hour, 24 hours, and 1 week in $37^{\circ}C$ distilled water before surface treatment, and then divided into five groups Group 1, grinding; Group 2, grinding and application of bonding agent, Group 3, grinding, etching with 37% phosphoric acid for 30sec, and application of bonding agent, Group 4, grinding, etching with 37% phosphoric acid for 30sec, silane treatment, and application of bonding agent ; Group 5, grinding, etching with 4% hydrofluoric acid for 30sec. silane treatment, and application of bonding agent. Indirect composite resin specimens ($Artglass^{\circledR}$, Heraeus Kulzer, Germany) were aged for 1 week in $37^{\circ}C$ distilled water and divided into seven groups Group 1 - Group 5, equal to Charisma specimens; Group 6, grinding, etching with 37% phosphoric acid for 60sec, silane treatment, and application of bonding agent; Group7, grinding, etching with 4% hydrofluoric acid for 60 sec, silane treatment, and application of bond-ing agent. The repair material($Charisma^{\circledR}$) was then added on the center of the surface (5 mm in diameter. 5 mm in height). The shear bond strength was tested and the data was analyzed using one-way ANOVA and the Student- Newman-Keuls test. The following conclusions were drawn. 1 The shear bond strength of $Charisma^{\circledR}$ specimens aged for 1 hour was significantly higher in Group 2 and Group 5 than in Group 1 (p<0.05), and that of $Charisma^{\circledR}$ specimens aged for 1 week was signifi-cantly higher in Group 3 and Group 5 than in Group 1 (p<0.05). No significant difference was found in the bond strength of specimens aged for 5 min and 24 hours. 2. In Group 2 of the $Charisma^{\circledR}$ specimens, there was significant difference between the bond strength of 24 hours and that of 1 week (p<0.05). 3. In Group 4 of the $Charisma^{\circledR}$ specimens, the shear bond strength of specimens aged for 24 hours was significantly higher than the others(p<0.05) 4. There was no significant difference between the shear bond strength of the $Artglass^{\circledR}$ specimens, 5. Most of the $Charisma^{\circledR}$ specimens showed cohesive fractures. Artglass^{\circledR}$ specimens that were etched with acid (phosphoric or hydrofluoric) for 30 sec showed more cohesive fractures.

• Journal of Periodontal and Implant Science
• /
• 제39권3호
• /
• pp.303-310
• /
• 2009

Purpose: The aerosol generated by ultrasonic scaler can contain bacteria or virus which can penetrate into body through respiratory systems of dentists, dental hygienist or patients. The aim of this study is to evaluate the effect of chlorhexidine digluconate as preoperative mouthrinse or lavage for ultrasonic scaler on the reduction of viable organisms in aerosol produced during periodontal treatment using ultrasonic scaler. Methods: 30 patients with moderate chronic periodontitis were included and divided into 3 groups: Control (no preoperative mouthrinse and tap water as lavage), CHG (preoperative mouthrinse with 0.1% chlorhexidine digluconate and tap water as lavage), CHL (no preoperative mouthrinse and 0.1% chlorhexidine digluconate as lavage). Each patient received scaling or subgingival curettage for 30 min. In CHG group, mouthrinse with chlorhexidine digluconate was performed for 1 min. before treatment. Before, during and after scaling or subgingival curettage, air sampling was performed for 7 min. each (1000 L/7 min.) with trypticase-soy agar plate. Agar plates were incubated in $37^{\circ}C$ aerobically. The numbers of colony-forming units (CFU) were counted and compared. Results: The numbers of CFUs of the samples obtained during treatment were $97{\pm}14.0$ in control, $73.1{\pm}14.9$ in CHG group and $44.5{\pm}9.0$ in CHL group. The difference among the 3 groups was determined to be statistically significant (one-way ANOVA with Bonferroni's correction, p-value: 0.0003). In contrast, the numbers of CFU of samples obtained before and after treatment were not significantly different among the groups. Conclusions: Chlorhexidine digluconate used as preoperative mouthrinse or lavage for ultrasonic scaler can reduce the microorganisms in aerosol produced during periodontal treatment using ultrasonic scaler. Less number of microorganisms were detected when chlorhexidine was used as lavage for ultrasonic scaler.

• 한국토양비료학회지
• /
• 제48권2호
• /
• pp.105-118
• /
• 2015

This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.9-18
• /
• 2017

Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.248-259
• /
• 2007

이 실험의 목적은 광중합복합 레진을 자체 제작한 광조사 차단 장치를 이용하여 간헐적 광중합시켜 기존의 연속 중합법과 변연적합도를 비교함으로써 간헐적 광중합의 영향을 알아 보는 것이다. 이번 실험에 사용된 재료는 Pyramid (Bisco, Schaumburg, U.S.A)와 Heliomolar (Ivoclar Vivadent, Liechtenstein)이다. 발치된 상악 소구치에 class II MOD 와동 형성 후 위 두 재료를 bulk 충전하고 다음의 중합cycle에 따라 중합시켰다: 제1군- 연속 광중합 (60초간 계속 광조사); 제2군-2초 광조사, 1초 광차단 (90초 시행); 제3군- 1초 광조사 1초 광차단 (120초 시행); 제4군- 1초 광조사, 2초 광차단 (180초 시행). 저작재현장치 (R&B, Daejeon, Korea)로 720000회의 운동횟수, 분당 120의 회전속도, $5^{\circ}C$와 $55^{\circ}C$의 물을 교대로 치아에 6000회 주사하면서 5.0 kg의 하중을 치아에 적용하였고 실험 전후 변연적합도를 전체와 부위별 변연으로 나누어서 $\times200$배율의 광학 현미경으로 측정하였다. 부위별 변연은 교합면, 인접면, 치은면 등 세 부위로 나누어서 법랑질 변연을 측정하였다. 전체 변연적합도에서 각 군간, 재료간, 저작 운동 전후 차이를 보기 위해 three-way ANOVA와 Duncan's multiple range test를 시행하였고, 부위별 변연적합도에서는 각 군에서 부위별 차이와 각 부위에서 군간 차이를 보기 위해 각각 one-way ANOVA와 Duncan's multiple range test를 시행하였다 (95% 유의수준). 전체 변연적합도를 보면, 저작 운동 전에는 Pyramid의 경우 3, 4군이 1,2군에 비해, Heliomolar의 경우 3.4군이 1군에 비해 전체 변연적합도가 우수하였고, 저작 운동 후에는 Pyramid. Heliomolar모두 3군이 1군에 비해 전체 변연적합도가 우수하였다 (p < 0.05). 재료간 비교에서는 저작 운동 잔에는 2군에서 Heliomolar가 Pyramid보다 변연적합도가 우수하였고 (p < 0.05) 그 외의 군에서는 유의차가 없었으며, 저작 운동 후에는 모든 군에서 재료간 유의차가 없었다. 각 부위별 변연적합도를 비교하면, 저작 운동 전 Pyramid에서는 교합면 변연에서는 4군이 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군 간 유의차를 보이지 않았다. Heliomolar에서는 교합면 변연에서 2, 4군이 1군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. 저작 운동 후 Pyramid에서는 교합면 변연에서는 3군이 1, 2군에 비해 높은 변연적합도를 보였고 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다. Heliomolar에서는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.508-514
• /
• 2009

이 실험의 목적은 근관 내에 충전된 수산화칼슘의 제거 시 치근단 1/3에서 기존의 근관세정법과 $EndoActivator^{(R)}$, $EndoVac^{(R)}$ system의 세정 효율을 비교하고, 근관 세정 중 치근단공 개방 확인의 영향에 대해 평가하고자 함이다. 60개의 단근치를 사용하였고 ISO #35까지 근관성형 후 수산화칼슘을 충전하였다. 근관 세정법과 치근단공 개방 확인 유무에 따라 6개 실험군으로 나누어 세정하였다. 실험 치아를 양분하여 치근단 3 mm에서 근관 면적에 대한 잔존 수산화칼슘 면적의 백분율을 측정하였다. 실험결과 $EndoActivator^{(R)}$, $EndoVac^{(R)}$군이 기존의 근관 세정법 군에 비해 유의하게 높은 제거효율을 나타냈으며 (p<0.05), 치근단공 개방 확인 유무에 따른 유의한 차이는 나타나지 않았다. 이 실험 결과에 따르면 기존의 근관세정법으로 효과적인 세정이 불가능했던 근관의 치근단 1/3부위에서 $EndoActivator^{(R)}$, $EndoVac^{(R)}$ system과 같은 근관 세정법이 효과적인 대안이 될 수 있다는 결론을 얻었다.

• 한국치위생학회지
• /
• 제8권3호
• /
• pp.85-98
• /
• 2008

This study is to enforce to ready basic data of effective dental education program and no smoking and no drinking program for high school students who do smoking and drinking, executed investigation by own recording way using smoking and questionnaire consisted of actual conditions and caries prevention awareness and dental health knowledge degree of drinking to some man high school. Analyzes result that total 487 people respond in SPSS WIN 13.0 programs and got following sequence. Result of this study is as following. 1. Mans high school students had more students who do not than a drinking student and main current received most soju. Third-year student appeared by thing which receive a lot of soju than 1 or 2 class student but different other difference was not seen by class. 2. Mans high school students had more students who do not than a smoking student and a student who smoke more than 3 years was the most. I can know was old since third-year student smokes than 1 or 2 class student. 3. It was not difference that keep in mind by drinking, smoking availability although there were many students who recognize that all of the on-time dental medical examination, sugar intake limitation, fluorine inclusion toothpaste, teeth fluorine application are seldom effective on caries prevention. 4. Recognized that right brushing is effective relatively on caries prevention. I was shown difference that recognized that righter brushing is effective on bad tooth courtesy call than a student who a student who do not smoke does, and keeps in mind according to smoking availability ($x^2$=6.78, p<0.05). 5. I knew best about question of 'A caries may not treat if is painless' among that question ask knowledge for a caries, and appeared by thing which do not know best about question of 'Know that method that supply fluorine in water'. 6. A student who do not drink general dental know-how for a caries was high knowledge degree for a caries than a drunk student but it was no difference that keep in mind by drinking availability. Also, a student who do not smoke by smoking availability was high knowledge degree for a caries than a done student but difference that keep in mind statistically was not seen. 7. It was no difference that keep in mind by drinking availability, but a student who do not smoke by smoking availability was high relation knowledge degree with food and a caries than a smoked student, and I was shown difference that keep in mind according to smoking availability(t=-2.03, p<0.05). 8. Awareness and synthetic estimation degree of knowledge degree a student who do not smoke than a smoked student mouth knowledge degree high, and I was shown difference that keep in mind according to smoking availability(t=-2.03, p<0.05). When see as result such as singularity, family, school, all social institutions may have to help by national business coming and try so that can become national business based on special know-how for development of effective and epoch-making education program as quickly as possible.

• Restorative Dentistry and Endodontics
• /
• 제42권2호
• /
• pp.87-94
• /
• 2017

Objectives: Chitosan has been widely investigated and used. However, the literature does not refer to the shelf life of this solution. This study evaluated, through the colorimetric titration technique and an analysis of dentin micro-hardness, the shelf life of 0.2% chitosan solution. Materials and Methods: Thirty human canines were sectioned, and specimens were obtained from the second and third slices, from cemento-enamel junction to the apex. A 0.2% chitosan solution was prepared and distributed in 3 identical glass bottles (v1, v2, and v3) and 3 plastic bottles (p1, p2, and p3). At 0, 7, 15, 30, 45, 60, 90, 120, 150, and 180 days, the specimens were immersed in each solution for 5 minutes (n = 3 each). The chelating effect of the solution was assessed by micro-hardness and colorimetric analysis of the dentin specimens. 17% EDTA and distilled water were used as controls. Data were analyzed statistically by two-way and Tukey-Kramer multiple comparison (${\alpha}=0.05$). Results: There was no statistically significant difference among the solutions with respect to the study time (p = 0.113) and micro-hardness/time interaction (p = 0.329). Chitosan solutions and EDTA reduced the micro-hardness in a similar manner and differed significantly from the control group (p < 0.001). Chitosan solutions chelated calcium ions throughout the entire experiment. Conclusions: Regardless of the storage form, chitosan demonstrates a chelating property for a minimum period of 6 months.