• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.101-111
• /
• 2022

As Asia's leading advanced country, Korea has an absolute advantage over foreign trade routes and maritime economies over inland countries. Following the change in social background, the original port area is for various reasons, and some ills are gradually revealing people's private interests. Due to this, it is the economic interest and future development space of the marine industry cluster in the port area that are directly affected and damaged. This study studied the relationship between marine industry clusters and port urban regeneration. It is intended to present the necessity and importance of activating the marine industry cluster through port urban regeneration while analyzing the regenerative design from the quantitative analysis angle. Therefore, first of all, the theoretical backgrounds were considered, and the cases of port cities that did well worldwide were analyzed according to the current status of the northern port of Busan, the research target site, through analysis. In addition, in order to increase the reliability of this study, the data of marine industry clusters and port city regeneration were reviewed using empirical analysis. Looking at the results of this study's case study and empirical analysis, it is a relationship that actually improved and interacted between the marine industry cluster and the port city regeneration. Through the study, it is expected that the Busan North Port Redevelopment Project will be promoted at the design, environmental, and economic level, and at the same time, it will be able to enhance its status as a marine city in Busan. The results show that, no matter which country or port city, the development of economy, society, culture and will inevitably promote the vigorous development of the marine industrial cluster, also, the port area development to a certain degree. will naturally the physical conditions of regional development obstacle through the port city of regeneration. This promotion will overcome.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.486-494
• /
• 2021

A rice (Oryza sativa L.) cultivar of the SPP (stakeholder participatory program) and ordinary rice were characterized based on water-absorption properties and cooked rice texture. During rice soaking, the rice grain transformed from transparent to opaque (white), indicating that water molecules diffused into the rice grain during soaking. In addition, cracks in the internal structure of soaked rice gradually increased with an increase in soaking time. Water absorption increased rapidly up to 20 min, but no increment was observed after 30 min of soaking. At this point, the entire areas of the soaked rice grain turned white, indicating that water absorption had reached saturation. SPP rice showed lower hardness and higher stickiness in its cooked form than ordinary rice, suggesting that SPP rice could be a more preferable choice than ordinary rice. Furthermore, cooked SPP rice was more edible in terms of hardness and stickiness after being kept warm for 12 h than ordinary rice. These results indicated that cooked SPP rice exhibited slow retrogradation and improved taste.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.484-490
• /
• 2021

Purpose: A rheumatoid forefoot deformity includes severe hallux valgus and claw toe of the four lateral toes. The authors intended to analyze the mid-term results of the modified Hoffman procedure for a rheumatoid forefoot deformity. Materials and Methods: Twenty-two feet of eighteen patients were followed up for more than two years after the modified Hoffman procedure. The mean age was 54.7 years, and the mean follow-up period was three years and four months. Clinically visual analogue scale (VAS) and American Orthopaedic Foot and Ankle Society (AOFAS) MP-IP score were analyzed preoperatively and postoperatively. The postoperative complications, the satisfaction of patients, and the presence of plantar callosity were also analyzed. Radiographically, the hallux valgus angle, the 1st intermetatarsal angle, the 1st interphalangeal angle, the 1st interphalangeal joint arthritic change after the operation, and the dorsiflexion angle and the time to union of the 1st metatarsophalangeal joint were analyzed. Results: Clinically, the VAS and AOFAS score were respectively improved from 7.1 points and 30.3 points preoperatively to 1.5 points and 83.1 points postoperatively (p<0.001). All patients were satisfied with the results. Plantar callosity disappeared in all cases. Radiographically, the mean hallux valgus angle, the 1st intermetatarsal angle, and the 1st interphalangeal angle changed from 52.8°, 13.3°, and 7.5° preoperatively to 16.2°, 8.7°, and 14.6° postoperatively (p<0.001). The mean dorsiflexion angle of the 1st metatarsophalangeal joint was 17.2° postoperatively. The mean time to radiographic union of the 1st metatarsophalangeal joint was 11.1 weeks. There were two cock-up deformities of the lesser toe, one wound problem, and two hallux interphalangeal joint arthritis as a complication. There were no cases of nonunion of the 1st metatarsophalangeal joint. Conclusion: The modified Hoffman procedure appears to be a safe and satisfactory procedure for a rheumatoid forefoot deformity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.1-10
• /
• 1984

The main objective of this experiment was to investigate the selection efficiency for clear rice by the application of the wx-carrier technique in rice. Twelve semi-dwarf waxy lines were bred through backcrosses to the two recurrent semi-dwarf parents, IR667 and IR1317, utilizing six different waxy cultivars as waxy donor parent. These waxy lines were crossed to three clear non-waxy varieties, IR24, Suweon 287 and Suweon294. Their F$_3$ seeds were separated into waxy and non-waxy and the clearness of non-waxy grains were counted. The results are summarized as follows: l. Mean clearness per plant for twelve waxy lines ranged from 3.7% to 78.9% at the 35 days after heading. It was higher in the lines which utilized IR 1317 as recurrent parent and it was lower in the lines which utilized IR667 as recurrent parent. Mean clearness per plant for recurrent parent, IRl317 and IR667 were 47.6% and 5.6% respectively. The clear non-waxy parents; Suweon287, IR24 and Suweon294 showed 83.7% 80.5% and 73.5% clearness respectively. 2. Mean clearness of F$_3$ seeds of the crosses between different waxy parents and IR24, Suweon 294 and Suweon 287 ranged 16.7-73.9%, 21.9-42.9% and 10.6-26.9%, respectively. IR24 crosses showed the highest mean clearness. 3. Highly positive correlation was found between the clearness of F$_3$ seeds of Suweon 287 crosses and those of Suweon294. 4. Significant differences were observed in mean clearness of F$_3$ seeds of the crosses between the different waxy lines, which was bred through the same number of backcrosses to the same recurrent parent, and a clear non-waxy parent. Crosses of IR1317 recurrent parent showed higher mean clearness than those of IR667 recurrent parent. 5. In some crosses, clearness was higher in homo-non-waxy than in hetero-non-waxy, but, in other crosses it was higher in hetero-non-waxy. Thus no distinct pattern in the segregation of clearness was observed along the homo-non-waxy or hetero-non-waxy. 6. From the results it was concluded that, the selection efficiency for the clear rice can be improved by choosing the proper waxy parent, as well as proper recurrent parent under the wx-carrier technique.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Journal of Life Science
• /
• v.33 no.2
• /
• pp.149-157
• /
• 2023

Transforming growth factor-β (TGF-β) is a multifunctional cytokine that affects not only the survival and growth of cancer cells but also the activity of immune cells. Although it has been generally accepted that cancer cell-derived TGF-β could promote the survival and growth of early cancer cells and have immunosuppressive roles, it has been known that TGF-β has differential effects according to the type or stage of cancer cells. Therefore, it is hard to clearly define its role in cancer progression and immune responses. This study investigated the effects of TGF-β signaling on the expression of five NKG2D ligands and the NK cell-mediated anticancer immune response in the primary colon cancer cell line KM12C and its two metastatic cell lines, KM12SM and KM12L4A. At the surface protein level, exogenous TGF-β decreased the expression of MICA, MICB, ULBP1, and ULBP2, and galunisertib increased the expression of MICA, MIAB, ULBP1, ULBP2, and ULBP3 in KM12C. However, KM12SM and KM12L4A showed no significant changes in the expression of NKG2DLs after treatment with TGF-β or galunisertib. TGF-β signaling inhibition via galunisertib improved the NK cell-mediated anticancer immune response against KM12C but did not show a significant response to KM12SM and KM12L4A. Therefore, the suppression of TGF-β signaling could improve the NK cell-mediated anticancer immune response against KM12C. However, an increase in NKG2DLs expression and an enhanced NK cell-mediated cancer immune response is hard to expect due to the alteration of TGF-β signaling in KM12SM and KM12L4A.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.51-60
• /
• 2022

Objectives: The purpose is to evaluate dosimetric performance and delivery efficiency of VMAT with Halcyon LINAC for double target spine SBRT Materials and Methods: 12 patients with spine oligometastases were retrospectively studied. Single-isocenter spine SBRT plans was established using Halcyon® with Dual Layer MLC and Truebeam® with High Definition MLC. All patients' plans were created in Eclipse TPS through the identical conditions and optimization. C.I, H.I, G.I (Gradient Index), maximal and volumetric doses to spinal cord and low dose area were evaluated for comparison of both plans. Also, total MU and BOT(Beam On Time) were evaluated. Results: Halcyon plans was no Statistical differences in C.I and H.I. However, the average of G.I was 4.64 for Halcyon, which decreased to 5.5% compared to Truebeam (P<0.001). Halcyon plans demonstrated statistically significant reduced G.I. The average of 50% and 25% isodose volume was 487.56 cc (-3.82%, P<0.001), 1859.45 cc (-4.75%, P<0.001) in Halcyon, respectively. Significantly reduced low dose spill were observed in Halcyon plans. In the evaluation of the spinal cord, the average of Dmean and V10 of Halcyon plans in the sample group with an overlap volume of less than 1 cc was 6.802 Gy (-3.504%, P=0.067), 5.766±1.683 cc (-8.199%, P=0.002), respectively. Halcyon plans demonstrated statistically significant reduced D_mean and V10. For delivery efficiency, MU and BOT(maximum dose rate for each machine), on average, increased in Halcyon plans. However, the average of BOT(800MU/min for each machine) was 648.33 sec for Halcyon (-1.74%, P<0.001). Conclusion: Halcyon plan for double-target spine SBRT demonstrated advantages in the low dose area with a steep dose gradient, while having dosimetrically equivalent target dose distribution and spinal cord protective effect. As a result, Halcyon LINAC produced a dosimetrically improved plan for double-target spine SBRT.

• Journal of agricultural medicine and community health
• /
• v.48 no.2
• /
• pp.132-143
• /
• 2023

Objectives: We aimed to describe the reporting patterns of 6 notifiable surveillance diseases in the Republic of Korea, including water- and foodborne infections, from 2012 to 2021. Methods: For the 12,296 cases that met the reporting criteria, we calculated the number of reported cases, including the number of cases confirmed by lab tests or suspected by a physician, the number of cases with delayed reporting and their average days of delay, and the median days required to report the confirmatory test results. Results: The overall number of reported cases consistently increased over the ten years, with a significant rise in the reported cases of typhoid fever, paratyphoid fever, and EHEC. Ninety-five percent of all reported cases were timely reported within one day of diagnosis. Vibrio vulnificus had the highest rate of delayed reporting (6.8% delayed over 1 day, 3.0% delayed over 3 days), while cholera had the lowest rate (1.9% delayed over 1 day, 0.1% delayed over 3 days). The average days of delayed reporting was 6.1 days: the highest for paratyphoid fever (10.8 days) and the lowest for cholera (2.7 days). For typhoid fever and paratyphoid fever, there has been an increase in the proportion of cases with negative test results. For vibrio vulnificus, there has been an increase in the proportion of cases with confirmed positive test results. As for EHEC, there has been a recent increase in cases with no confirmatory tests. Conclusions: Reported cases of water- and foodborne infectious diseases increased, indicating improved surveillance system completeness. However, for paratyphoid fever, improvements are needed in terms of timely notification by healthcare facilities and timely reporting of confirmatory test results.

• The Korean Journal of Franchise Management
• /
• v.2 no.2
• /
• pp.95-110
• /
• 2011

As global economic conditions are getting uneasy and polarization of our economy is intensified, the economic sentiment of small businesses is still low and unstable. The collapse of worldwide banking systems due to sub prime crisis in 2007 became the catalyst that shakes financial industries in each country in the world; the most sentiment people, small businesspersons, also have hard time facing survival way out, facing a great crisis. All organizing powers including manufactures, wholesales and retails are being gradually greater in mutual relations and dependence, and unstable factors about risks are also increasing. For exterior environmental and physical risk factors which cannot make small businesses survive themselves by developing ways out are eventually increasing, those who cannot cope with these factors face a great crisis. Although the government tries hard to overcome this situation conducting many ways, the effect does not continue. It is the real state that independent business markets including overall employment and establishing business have vicious cycle that they cannot be improved, due to increase of employment centered on short-term labors which lack durability in creation of employment and decline of household income. Recently, growth shows indication of slowdown because of multinational risk factors including financial crisis in each country in Europe, the death of Kim Jung-il, relationship with North Korea, and unstability of war situation in the Middle East Asia. Experts expect that growth rate will be about 4%, and independent business that ordinary people feel is still gloomy. It's reality that there is no adequate alternative for lack of jobs, unstable employment and a means of living after retirement. Also, the fact that large companies enter the market which is narrow and in the excessive competition should be an environmental factor that makes the situation worse. The business concept, a franchise, is the part we should think about whether it is the institutional solution that can guarantee independent businessmen stable life. Major companies are frightfully entering the market today, breaking the barrier to entry and shouting of a win-win with independent businesses. It's the small businesspersons who go through painful domestic recession, cannot predict the future and manage confusing and unstable independent business. It's very important to restore the domestic economy through wisely boosting consumption as soon as possible. It's also important to lead the situation by gathering powers of the government and related organizations, agonizing, suggesting solutions, and establishing accurate directions. The purpose of this study, therefore, is to suggest ways to strengthen competitiveness of small businesspersons by examining small business support policies which are currently implemented.