• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.51-55
• /
• 2006

The green emitting high performance OLEDs using the $Alq_3$-C545T fluorescent system have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4'-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium thin oxide)/glass substrate by vacuum evaporation. And then, green color emission layer was deposited using $Alq_3$ as a host material and C-545T[10-(2-benzothiazolyl)-1,1,7,7- tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]/benzopyrano[6,7,8-ij]-quinolizin-11-one] as a dopant. Finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/$Alq_3$:C545T/$Alq_3$/LiF/Al were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Green OLEDs fabricated in our experiments showed the color coordinate of CIE(0.29, 0.65) and the maximum power efficiency of 7.3 lm/W at 12 V with the peak emission wavelength of 521 nm.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.2
• /
• pp.163-171
• /
• 1994

This experiment was conducted to investigate the discrimination of cigarette brands and the similarity between Korea and America cigarette brands by near infrared spectra. Statistical tools such as principal component analysis (PCA) and mahalanobis distance(M.D) were used. The discrimination rate of the Korea and the America cigarette brands, determined by position number which was calculated with PCA and M.D, was 94% and 87%, respectively. The spectra of the 10 America cigarette brands were selected by averaging 5 sample spectra for each brand and another 5 spectra for each brand were investigated to use as the sample spectra. Comparing the sample spectra with the selected spectra by M.D using 410-1090 nm, 1110-1850 nm and 1970-2490 nm wavelength, the discrimination rate which was determined by the closest M.D between the sample and the selected spectra was 100% when each spectra was investigated on the same time. But the discrimination rate decreased 50% when the sample and the selected spectra were investigated on the different time. Excluding 1970-2490 nm wavelength, the discrimination rate increased up to 90% when the sample and the selected spectra were investigated on the different time. Comparing the spectra of Korea cigarette brands with those of America cigarette brands by M.D using only 410-1090 nm and 1110-1850 nm wavelength, the spectra of Expo(G) was similar to Winston, Vantage(U.L) and Benson & hedges(M.), the spectra of Hanaro(D) was similar to Carrel, Winston(L), Vantage(U.L), \Vantage and Carrel(L), the spectra of Hanaro(L) was similar to Winston(L) , Carton, Vantage and Carmel(L) and the spectra of Pinetree was similar to Kent, Kool, Kent(G.L), Merit and Benson & hedges(L), respectively. Key Words : NIRS, cigarette brands discrimination

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.115-119
• /
• 2002

The formation of inclusion complexes between cyclodextrin(CD) and Congo red was studied by spectrophotometric methods at various temperatures. The cavity sizes are 0.49 nm, 0.62 nm for $\alpha$-and $\beta$-CD, respectively. Therefore, $\alpha$-CD was not found to form an inclusion complex with Congo red due to steric hinderance. In the $\beta$-CD use two $\beta$-CD molecules formed an inclusion complex with one molecule of Congo red, from the slope of the S-shaped curve increased. Two prominent isosbestic points appear at 346 nm and 478 nm. The formation constants were decreased with the increasing temperatures, due to low binding energy between $\beta$-CD and Congo red. The thermodynamic parameters were calculated from the plot of $lnK_f$ vs 1/T. The $\Delta$H, $\Delta$S and $\Delta$G were -50.73 kJ/mol, $-108.96J/K{\cdot}mol$ and -18.26 kJ/mol, respectively.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.131-136
• /
• 2015

The nanostructural graphene/vanadium oxide (graphene/$V_2O_5$) composite with enhanced capacitance was synthesized by the electro-deposition in 0.5 M $VOSO_4$ solution. The morphology of composites was characterized using scanning electron microscopy (SEM), x-ray diffraction pattern (XRD), and x-ray photoelectron spectroscopy (XPS). The oxidation states of the electro-deposited vanadium oxide was found to be $V^{5+}$ and $V^{4+}$. The morphology of the prepared graphene/$V_2O_5$ composite exhibits a netlike nano-structure with $V_2O_5$ nanorods in about 100 nm diameter, which could lead a better contact between electrolyte an electrode. The composite with a deposition time of 4,000 s exhibits the specific capacitance of $854mF/cm^2$ at a scan rate of 20 mV/s and the capacitance retention of 53% after 1000 CV cycles.

• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.108-115
• /
• 2017

We report the assembly procedure and performance evaluation of a visible and near-infrared spectrometer in the wavelength region of 400-900 nm, which is later to be combined with fore-optics (a telescope) to form a f/2.5 imaging spectrometer with a field of view of ${\pm}7.68^{\circ}$. The detector at the final image plane is a $640{\times}480$ charge-coupled device with a $24{\mu}m$ pixel size. The spectrometer is in an Offner relay configuration consisting of two concentric, spherical mirrors, the secondary of which is replaced by a convex grating mirror. A double-pass test method with an interferometer is often applied in the assembly process of precision optics, but was excluded from our study due to a large residual wavefront error (WFE) in optical design of 210 nm ($0.35{\lambda}$ at 600 nm) root-mean-square (RMS). This results in a single-path test method with a Shack-Hartmann sensor. The final assembly was tested to have a RMS WFE increase of less than 90 nm over the entire field of view, a keystone of 0.08 pixels, a smile of 1.13 pixels and a spectral resolution of 4.32 nm. During the procedure, we confirmed the validity of using a Shack-Hartmann wavefront sensor to monitor alignment in the assembly of an Offner-like spectrometer.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.129-139
• /
• 2014

This study was conducted in order to investigate the optimal fermentation periods of the Smilax china L. leaves as a fermented tea via Aspergillus oryzae for 0 (non-fermented), and 10, 20, and 30 days (NF, F10, F20, F30). It was also observed for its quality characteristics. In the color and spectrum (400~700nm) of 1% tea water extract, NF was light yellow, whereas fermented tea (F10~F30) was light red color, and the F10 among F10~F30 has the clearest color and spectrum. Furthermore, acceptabilities of aroma and brightness were insignificantly different between NF and F10~30, while the mouth feel and overall acceptabilities were insignificantly distinct among all of the fermented teas. Therefore, these results suggest that the appropriate fermentation period for tea fermentation is 10 days. On the other hand, the total polyphenol and flavonoid content in the NF was the highest among all of the fermented teas. In the antioxidant parameters, EDA (electron donating ability), FRAP (ferric reducing antioxidant power), and LPOIA (lipid peroxidation inhibitory activity) in the NF were the highest among all fermented teas. Meanwhile, the XOI (xanthine oxidase inhibitory activity) was low, as well as insignificantly different from NF and F10~F30, whereas the AOI (aldehyde oxidase inhibitory activity) was markedly higher (38.09~41.70%) by the hot water tea extract (with or without fermentation), particularly the AOI that has increased via fermentation. In conclusion, the overall antioxidant activity tended to be reduced by fermentation; however, the EDA, FRAP and LPOIA in the fermented tea for 10 days was higher than the activities during 20~30 days of fermentation. There was a similar result in the color and acceptability of fermented tea for 10 days, which was remarkably better than those of 20-30 days. Therefore, fermented tea from the leaves of Smilax china L. could be expected to be used as a functional tea without the loss of inhibitory activity of both the XO and AO via fermentation.

• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.79-85
• /
• 2017

The crack-free AlGaN template has been successfully grown by using selective area growth with triangular GaN facet. The triangular GaN stripe structure was obtained by vertical growth rate enhanced mode with low growth temperature of $950^{\circ}C$ and high growth pressure of 500 torr. The lateral growth rate enhanced mode of AlGaN for crack-free and flat surface was also investigated. Low pressure of 30 torr and high V/III ratio of 4400 were favorable for lateral growth of AlGaN. It was confirmed that the $4{\mu}m$ -thick $Al_{0.2}Ga_{0.8}N$ was crack-free over entire 2-inch wafer. The dislocation density of $Al_{0.2}Ga_{0.8}N$ was as low as ${\sim}7.6{\times}10^8/cm^2$ measured by cathodoluminescence. Based on the high quality AlGaN with low dislocation density, the ultraviolet laser diode epitaxy with cladding, waveguide and GaN/AlGaN multiple quantum well (MQW) was grown by metalorganic chemical vapor deposition. The stimulated emission at 349 nm with full width at half maximum of 1.8 nm from the MQW was observed through optical pumping experiment with 193 nm KrF laser. We also have fabricated the deep ridge type ultraviolet laser diode (UV-LD) with $5{\mu}m-wide$ and $700{\mu}m-long$ cavity for electrical properties. The turn on voltage was below 5 V and the resistance was ${\sim}55{\Omega}$ at applied voltage of 10 V. The amplified spontaneous emission spectrum of UV-LD was also observed from pulsed current injection.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.176-187
• /
• 2000

Objectives : This study was purposed to investigate the antioxidative effects of Paeoniae radix aqua-acupuncture solution(PR) on culture liver cell system, lipid peroxidation and antioxidative enzyme activities in tert-butyl hydroperoxide(t-BHP) treatmented conditions. Methods : Cultured normal rat liver cell(Ac2F) were prepared and incubated with or without PR(at 2% volume in culture medium). After 16~18hr, cells placed in DMEM medium without serum, and then incubated with 1mM t-BHP for 2hr. Viable cells were detected by MTT assay, and the levels of lipid peroxide(LPO) were measured by TBA method. And catalase activity was measured as the decrease in hydrogen peroxide absorbance at 240nm on spectrophotometer using 30mM hydrogen peroxide. Superoxide dismutase(SOD) were assayed by recording the inhibition of nitro blue tetrazolium reduction with xanthine and xanthine oxidase. Glutathione peroxidase(GPX) activity was determined by the modified coupled assay developed by Paglia and Lawrence. The reaction was started by addition of 2.2mM hydrogen peroxide as substrate. The change in absorbance at 340nm was measured for 1min on spectrophotometer. Glutathione-S-transferase(GST) activity was assayed with CDNB as substrate and enzyme activity of GST towards the glutathione conjugation of CDNB. Results : Cell killing was significantly enhanced by addition of t-BHP compared to those of untreated group. PR pretreated cell resisted the toxic effects of t-BHP. LPO levels of t-BHP treatment group were significantly higher than other groups. This increased level was significandy reduced by PR pretreatment. The t-BHP treatment resulted in a decrease of catalase, GPX and GST activities. By contrast, PR pretreatment markedly increased compare to those of untreated groups. Conclusions : T-BHP which can produce intracellular free radical was used for inducer of the peroxidation of cellular lipids. PR protected the cell death induced by t-BHP and significantly increased cell viabiliry in the normal rat liver cell, and showed effective inhibition of lipid peroxidation, and elevations of catalase, GPX and GST activities. These results suggested that PR might play a protective role in lipid peroxidation by free radicals.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.915-920
• /
• 2018

With the development of modern microelectronics technologies, the power density of electronic devices is rapidly increasing, due to the miniaturization or integration of device elements which operate at high frequency, high power conditions. Resulting thermal problems are known to cause power leakage, device failure and deteriorated performance. To relieve heat accumulation at the interface between chips and heat sinks, thermal interface materials (TIMs) must provide efficient heat transport in the through-plane direction. We report on the enhanced thermal conduction of $Al_2O_3-based$ polymer composites, fabricated by the surface wetting and texturing of thermally conductive hexagonal boron nitride(h-BN) nanoplatelets with large anisotropy in morphology and physical properties. The thermally conductive polymer composites were prepared with hybrid fillers of $Al_2O_3$ macro beads and surface modified h-BN nanoplatelets. Hexagonal boron nitride (h-BN) has high thermal conductivity and is one of the most suitable materials for thermally conductive polymer composites, which protect electronic devices by efficient heat dissipation. In this study, we synthesized hexagonal boron nitride nanoparticles by the pyrolysis of cost effective precursors, boric acid and melamine. Through pyrolysis at $900^{\circ}C$ and subsequent annealing at $1500^{\circ}C$, hexagonal boron nitride nanoparticles with diameters of ca. 50nm were synthesized. We demonstrate that the addition of a small amount of calcium fluoride ($CaF_2$) during the preparation of the melamine borate adduct significantly enhanced the crystallinity of the h-BN and assisted the growth of nanoplatelets up to 100nm in diameters. The addition of a small amount of h-BN enhanced the thermal conductivity of the $Al_2O_3-based$ polymer composites, from 1.45W/mK to 2.33 W/mK.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.169-178
• /
• 2014

Fluid model based numerical analysis is done to simulate a low damage etch back system for 20 nm scale semiconductor fabrication. Etch back should be done conformally with very high material selectivity. One possible mechanism is three steps: reactive radical generation, adsorption and thermal desorption. In this study, plasma generation and transport steps are analyzed by a commercial plasma modeling software package, CFD-ACE+. Ar + $CF_4$ ICP was used as a model and the effect of reactive gas inlet position was investigated in 2D and 3D. At 200~300 mTorr of gas pressure, separated gas inlet scheme is analyzed to work well and generated higher density of F and $F_2$ radicals in the lower chamber region while suppressing ions reach to the wafer by a double layer conducting barrier.