• YAKHAK HOEJI
• /
• v.30 no.6
• /
• pp.311-316
• /
• 1986

A new UV labeling reagent was developed and used in HPLC for the determination of prostaglandin $E_2$ which have weak UV light-absorbing property. This reagent, 2-bromoacetyltriphenylene, was synthesized by the bromination of 2-acetyltriphenylene which was obtained from triphenylene by Friedel-Crafts reaction. The wave length maximum (${\lambda}_{max}^{CH_3CN}$ of this reagent was 268nm. Prostaglandin E$_2$ was extracted from prostaglandin E$_2$-$\beta$-cyclodextrin using a Sep-pak $C_{18}$ cartridge. The prostaglandin E$_2$ was labeled with 2-bromoacetyl-triphenylene in aectonitrite using 18-crown-6-ether as catalyst. Derivatized prostaglandins were separated on a reversed-phase column (Radial-pak) $\mu$-Bondapak $C_{18}$ using acetonitrile: water=60:40 as mobile phase. The effluent was monitored by UV detector at 254nm filter kit. Linearity of calibration curve was obtained between 30ng and 140ng, and the lower limit of detection was 5ng.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.1
• /
• pp.8-15
• /
• 2024

The CaF₂ single crystal has notable characteristics such as a large band gap (12 eV), excellent transparency over a wide wavelength range, low refractive index and dispersion. Due to these outstanding properties, CaF₂ single crystal has considered as a promising material for short-wavelength light sources in recent lithography processes. However, there is an inherent birefringence of the material at 157 nm and the resulting aberration can be compensated for through the combination of the (100) plane and the (111) plane. Therefore, it is necessary to investigate the characteristics according to the plane. In this study, we analyzed crystallinity, optical properties of commercial CaF₂ single crystal wafers grown by the Czochralski method. In particular, through chemical etching under various conditions, it was confirmed that the shape of etch pits appears differently depending on the plane and the shape and array of specific etch pits affected by dislocations and defects were examined.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.220-224
• /
• 2000

Ultra-fine $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$ferrite powders have been prepared by the sol-gel method. The crystallographic and magnetic properties of the sample have been investigated by means of x-ray diffraction, Mossbauer spetroscopy and vibrating sample magnetometry. The formation of nano crystallized particles is confirmed. The x-ray diffractions of all samples with various compositions clearly indicate the presence of spinel structure. The Mossbauer spectra could be fitted as the superposition of two sextets due to F $e^{3+}$ A-site and B-site. The IS and QS values nearly constant with substituted Co-Ti contents, whereas $H_{hf}$ of B-site decreases with increasing Co-Ti substitution in $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$. The magnetic behaviour of powders shows that the saturation magnetization and the coercivity decrease with increasing x in $Co_{1+x}$F $e_{2-}$2x/ $Ti_{x}$ $O_4$.$.X>.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.2
• /
• pp.152-159
• /
• 1990

Four active strains, producing siderophore and antagonizing to soil plant disease fungi, were isolated and identified from the wheat rhizosphere to reduce the injurious effects of continuous cropping and study on the biological control. The obtained results were summerized as follow. 1. Four strains of fluorescent Pseudomonas were isolated from the wheat rhizosphere and identified as Pseudomonas fluorescens Biotype A(Ps-1,2,5) and Biotype B(Ps-3) That strains inhibitied growth of R. solani, F.oxysperum and F. solani in vitro 2. Optical density of pigment was maximum at 410nm. 3. Siderophore production by identified strains was decreased with addition of $Fe^{+3}$, although not decreased with addition of $Fe^{+2}$ 4. Pigment of Ps-1, 2 and 3 strain inhibitied growth of R. slani, F. oxysperum and F. solani but pigment of Ps-5 strain did not inhibitie growth of R. solani 5. Effect of inoculation was in order of Ps-2, 1, 5 and 3 strain through the dark culture method, and effect of Ps-1 and Ps-2 was greater than that of treatment of captan 50ppm.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.658-662
• /
• 2014

$Eu^{2+}/Dy^{3+}$-doped $Sr_2MgSi_2O_7$ powders were synthesized using a solid-state reaction method with flux ($NH_4Cl$). The broad photoluminescence (PL) excitation spectra of $Sr_2MgSi_2O_7:Eu^{2+}$ were assigned to the $4f^7-4f^65d$ transition of the $Eu^{2+}$ ions, showing strong intensities in the range of 375 to 425 nm. A single emission band was observed at 470 nm, which was the result of two overlapping subbands at 468 and 507 nm owing to Eu(I) and Eu(II) sites. The strongest emission intensity of $Sr_2MgSi_2O_7:Eu^{2+}$ was obtained at the Eu concentration of 3 mol%. This concentration quenching mechanism was attributable to dipole-dipole interaction. The $Ba^{2+}$ substitution for $Sr^{2+}$ caused a blue-shift of the emission band; this behavior was discussed by considering the differences in ionic size and covalence between $Ba^{2+}$ and $Sr^{2+}$. The effects of the Eu/Dy ratios on the phosphorescence of $Sr_2MgSi_2O_7:Eu^{2+}/Dy^{3+}$ were investigated by measuring the decay time; the longest afterglow was obtained for $0.01Eu^{2+}/0.03Dy^{3+}$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.6
• /
• pp.471-476
• /
• 2006

Pseudomonas aeruginosa F722 produces a biosurfactant (BS) during its degradation of carbon and hydrocarbon compounds. The culture conditions for upgrading the biosurfactant productivity were investigated. The concentration of the biosurfactant produced by P. aeruginosa F722 was 0.78 g/L in C-medium; however, this increased to 1.66 g/L in BS medium, which was experimentally adjusted to optimal conditions. $NaNO_{2}$ was found to be most effective for microbial growth, with an $O.D_{600nm}$ of 1.18 for 0.1 % $NaNO_{2}$. Microbial growths, according to the $O.D_{600nm}$ were 2.53, 2.68, 2.89, and 2.87 for glucose, glycerol, $n-C_{10},\;and\;n-C_{22}$, respectively. Clear zone diameters (cm), indicating biosurfactant activity, were 9.0, 8.8, 5.7, and 8.5 for glucose, glycerol, $n-C_{10},\;and\;n-C_{22}$, respectively. Microbial growth was not consistent with the biosurfactant activity. The best biosurfactant activity was found with a C/N ratio of 20. Under optimal culture condition, the average surface tension decreased from 70 to 30 mN/m after 5 days. With aeration of 1.0 vvm, the biosurfactant produced increased to 1.94 g/L (up to 20%) compared to that of 1.66 g/L with no aeration. With aeration, the velocities of glucose degradation during both the log and stationary growth phases increased from 0.25 and $0.18\;h^{-1}$ to 0.33 and $0.29\;h^{-1}$, respectively, and the time for the culture to arrive at the maximum clear zone diameter became shorter, from 80 down to 60 h with no aeration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.477-478
• /
• 2019

We have investigated the experiments in which fabrication and characterization of single-electron transistors were conducted due to easy fabrication and high functionality. In the Fe-MgF2 granular film, in which Fe grains are distributed between insulators instead of the conventional quantum dots, it can be easily fabricated by EB deposition alone, and various output values can be expected by applying two or more gate voltages. The tunneling thickness of the film for single-electron operation was investigated and it was confirmed that the tunneling occurred at 2.1 nm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.111-116
• /
• 2003

The red emitting phosphors for low voltage cathode luminescent, fine $(Y,Gd)_2O_2$S : Eu powders were synthesized and investigated the effect of $Gd^{3+}$as sensitizer at variety of sintering temperature. The highly intense emission line of $(Y,Gd)_2O_2$S : Eu at 627 nm is attributed in the transition from $^5D_o to ^7F_2$ energy levels. It showed the maximum value at the doping level of 5 mole% of $Gd^{3+}$at $950^{\circ}C$ of sintering temperature and then, it was degraded rapidly. The mean particle size of $(Y,Gd)_2O_2$S : Eu was obtained around 1 fm and the cathode luminescent properties of (Y,Gd)$_2$O$_2$S : Eu were better than those of $(Y,Gd)_2O_2$S : Eu.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1039-1044
• /
• 2009

Red color OLED has been fabricated by the doping method apply to CBP using co-evaporation, GDI4349 of phosphorescent dopant, and rubrene of fluorescent dopant. The OLED structure are multi-layer of ITO(150 nm)/ELM_HIL(50 nm)/ELM_HTL(30 nm)/CBP : Rubrene, GDI4349 (30 nm)/BAlq (30 nm)/LiF(0.7 nm)/Al (100 nm). Accomplished best result at 3 vol.% of rubrene when the OLEDs were made of 1, 3, 5, 7, 9 vol.% doped rubrene. The highest efficiency of 7.2 cd/A was resulted at 8 vol.% of GDI4349 when the OLEDs were made among 5, 8, 11, 14 vol.% of GDI4349. Obviously, the best concentration of rubrene at 3 vol.% and changing GDI4349 concentration to 5, 8, 11, 14 vol.% OLED dramatically enhanced characteristic of resulted 10.7 cd/A at 8 vol.% of GDI4349. This result would understand to analyse as the emission efficiency increases by energy transport efficiency increase using GDI4349 energy transfer when rubrene absorbs the energy from CBP of fluorescences host.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.180-180
• /
• 2010

본 연구에서는 P-Type의 NiO를 Glass기판의 ITO전극위에 RF-스퍼터링 방법으로 증착하였으며, NiO 완충층의 두께 변화에 따른 OLED (Organic Light Emitting Diode) 소자의 발광 특성에 대해 연구하였다[1, 2]. NiO는 우수한 전기 광학적 특성을 가지고 있어 OLED소자의 구동전압, 발광 효율 등의 특성을 향상 시킬 수 있다[3]. NiO 완충층의 두께 변화는 스퍼터링 증착시간을 통해 5-20 nm로 조절하였으며 소자의 구조는 Glass/ITO/NiO(0~20nm)/NPB(40nm)/Alq3(60nm)/LiF(0.5nm)/Al(120nm)형태로 제작하였다. ITO/NPB 계면에 NiO 완충층을 삽입함으로써 OLED 발광소자의 구동전압을 ~8V에서 ~5V (NiO, 10nm)로 낮출 수 있었다.