• 한국환경과학회지
• /
• 제4권5호
• /
• pp.123-123
• /
• 1995

The treatment performances of anaerobic-aerobic activated sludge process were investigated under various operation conditions. The treatment system proposed in this study gave a relatively stable performance against hourly change of the flow rate and showed a satisfactory removal of nitrogen and phosphorus compounds under experimental conditions. The recycle ratio of mixed liquor from aerobic to anaerobic region and peak coefficient primarily controlled the extent of nitrogen removal. The recycle ratio had the optimum values which were determined by the microbial activities of nitrification and denitrification. The behavior of the treatment unit could be simulated by using the kinetic equations and reactor models which considered the treatment units as complete mixing tanks.

• 대한환경공학회지
• /
• 제34권3호
• /
• pp.189-194
• /
• 2012

본 연구는 유로변경식 3단 BAF를 사용하여, C/N ($TCOD_{cr}$/TKN)비가 낮은 생활하수를 대상으로 질소 처리 효율을 향상시키기 위해 제안되었다. 체류시간 6시간에서의 유로변경 3단 BAF의 효과를 평가하기 위해 실험실 규모로 실시하였다. 유로변경식 3단 BAF 공정이 3단 BAF보다 총 질소 제거효율이 약 7% 높은 것으로 나타났는데, 이것은 유기물을 효율적으로 사용하였기 때문이다. 또한 암모니아성 질소의 제거는 독립적인 호기조에서 질산화만을 수행하였기 때문에 질산화 효율이 안정적이었다. 이것은 본 연구에서 제안한 유로변경식 3단 BAF공정이 유기물 흡착을 이용하여 질소의 제거, 탈질 및 질산화에서 우수한 효율을 보였다.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.16-21
• /
• 2007

Three dimensional numerical study was carried out to investigate the effect of aspect ratio on microchannel flow. We considered five straight rectangular channels with aspect ratios (height/width) 0.2, 0.4, 0.6, 0.8 and 1.0. Nitrogen gas flow was investigated for both slip and noslip wall boundary conditions. Isothermal wall condition was assumed. We used control volume method for this simulation. The slip velocity increases with the increase of aspect ratio. Friction coefficient decreases with the increase of aspect ratio. Slip friction coefficient is lower than noslip friction coefficient. Mass flow rate of slip model is higher than that of noslip model. We compared our results with the experimental result reported in the literature. The agreement was good.

• 환경위생공학
• /
• 제24권1호
• /
• pp.13-24
• /
• 2009

ASA공정은 유입수를 혐기조와 무산소조에 분배하여 유입시킴으로써 반송슬러지에 영양 물질을 공급하여 슬러지의 안정화 및 인 방출을 유도하고, 후속 호기조에서 유기물 제거, 인 과잉섭취 및 질산화를 조장하며, 무산소조에서는 내부반송을 하지 않고 폐수의 탄소원을 이용하여 탈질함으로써 내생탈질을 증가시키는 공법이다. 본 연구에서는 가정오수에 ASA공정을 적용하여 유입수의 분배비와 체류시간이 처리효율에 미치는 영향을 파악하였다. 유입수 분배비와 HRT는 BOD 제거에 큰 영향을 미치지 않았고 BOD 제거율은 운전기간 동안 92.0% 이상 안정적으로 유지되었다. 유입수 분배비가 4:6일 때에는 질소제거율이 82.6%, 9:1일 때에는 인제거율이 67.8%로서 가장 높게 나타났다. ASA공정에 의한 가정오수처리에서 유입수의 분배비는 6:4, HRT는 8hr일 때 제거율이 가장 양호하였으며, 이때 질소, 인제거율은 각각 82.6%와 59.5%이었다.

• 소성∙가공
• /
• 제20권4호
• /
• pp.296-302
• /
• 2011

The objective of this paper is to determine the effect of process parameters on the behavior of a 18Cr-10Mn-$0.44N_2$ nitrogen steel sample deformed by hot rolling. Compression tests were carried out at high temperatures to determine the flow stresses needed for a finite element(FE) analysis. The strain rate, ranging from 0.1 to $1.0s^{-1}$, significantly affected the flow stress at temperatures higher than $1,000^{\circ}C$. Non-isothermal rolling simulations and laboratory rolling tests were performed with plate specimens 14.5mm thick, 135mm wide and 226mm long. A rolling reduction of 15% per pass leading to a cumulative rolling reduction of 60% was determined as optimal. The extension ratio of 176.5% in the length direction was about 30.4 times greater than the extension ratio of 5.8% in the width direction. Isotropic properties for tensile strength, microstructure and grain size were measured after mock-up hot rolling tests. The results from the mockup tests were found to be in good agreement with those of the simulations.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.31-39
• /
• 1990

An analytical method for particulate carbon and other elements by using elemental analyzer was investigated. Carbon, hydrogen, and nitrogen was determined as CO$_{2}$, H$_{2}$, and N$_{2}$, respectively. Organic was determined after scparation from elemental carbon(Cae) by volatilization and thermal decomposition in a heated helium flow. With organic materials examined in this reprot, more than 90% of carbon was detected as above 600$^{\circ}$C. But it is considered that a few percents of some compounds were charred above 550$^{\circ}$C. A small amount of Cae was oxidized in the inert atmosphere above 850$^{\circ}$C, but the reason was not explained clearly. Based on the thermal chracteristics of Cao it was found that the optimum temperature of heating in the helium flow of an elemental analyzer for Cao analysis is 630$^{\circ}$C. Carbon in a sample after removing Cao was assumed as Cae and the gramatom ratio of hydrogen to carbon in the sample was 0.4 and less. Rescovery of nitrogen derived from some ammonium salts and nitrates was 100% by two-step measurement with elemental analyzer. By the analytical method investigated in this report, carbon and other elements in suspended particulates(S.P) collected at an urban area in Seoul were measured. There was a good correlation between total nitrogen in SP measured by elemental analyzer and nitrogen estimated form ammonium ions and nitrate ions in SP. The nitrogen from these ions accounts for 80% of the total nitrogen. It is further suggested that the residue(20%) of the total nitrogen is attributed to the other nitrogeneous compounds.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.359-365
• /
• 2005

Silicon nitride coating films with various ratios of nitrogen to silicon contents were prepared and characterized. The film was coated on silicon substrate by sputtering method with changing nitrogen gas flow rate in a chamber. The nitrogen to silicon ratio was found to have values in a range from 0 to 1.4. Coated film was characterized with scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, nanoindentation scanning probe microscopy, x-ray photon spectrometry, and Raman spectrometry. Silicon nitride phase in all samples showed amorphous nature regardless of N/Si ratio. When N/Si ratio was 1.25, hardness and elastic modulus of silicon nitride film showed maximum with 22 GPa and 210 GPa, respectively. Those values decreased, when N/Si ratio was higher than 1.25. Raman spectrum showed that no silicon phase exist in the film. XPS result showed that the silicon-nitrogen bond was dominant way for atomic bonding in the film. The structure and property was explained with Random Bonding Model(RBM) which was consistent with the microstructure and chemistry analysis for the coating films.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.75-82
• /
• 1995

Two digestion trials were conducted to investigate the effect of feeding heated soybean meal (HSBM) on ruminal and post-ruminal digestion of organic matter (OM) and nitrogen (N), bacterial N flow to the duodenum and N balance in young calves weaned at 6 weeks of age. In trial 1, calves were fed concentrate diets containing soybean meal (SBM) or HSBM and hay mixed in the ratio of 6:4 to support daily weight gain of 0.5 kg. The same concentrate diets were used in trial 2, but the ratio of concentrate to hay was 7:3 to support body weight gain of 0.7 kg/d. Measurements were made 10 and 13 weeks of age in trial 1, and at 10 and 15 weeks in trial 2. Ruminal OM digestibility increased with advancing age in both trials. Ruminal OM digestion was not affected by the diets in trial 1, but it was greater for the SBM diet than for the HSBM diet at 10 weeks in trial 2. Net N loss from the rumen was lover for the HSBM diet than for the SBM diet in trial 1, but it was not affected by the diets in trial 2. Bacterial N flow to the duodenum, N digestion in the total digestive tract and N retention were not affected by the diets in either of the trials.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.321-326
• /
• 1998

Electrical breakdown characteristics of liquid nitrogen($LN_2$) taking into consideration for application of high $T_c$ superconductor is very important. Also $LN_2$ will be used as both coolant and insulator in superconducting generator. In this paper, we investigated ac breakdown characteristics of cryogenic nitrogen gas above a $LN_2$ for rod-to plane electrode configuration. As result the breakdown mechanism of $LN_2$is dependence on bubble effect. And breakdown voltage is a ratio on bubble s size but electrodes arrangement is to make no difference. The breakdown voltage decreases slightly with increasing flow velocity, it again decreases abruptly with increasing flow velocity. These results were interpreted as the within pressure of rod electrode and Maxwell force.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.66-69
• /
• 2001

Effect of $N_2$ flow rate on properties of GaN thin films grown by plasma-enhanced molecular beam epitaxy(PEMBE) was discussed to optimize the quality of thin films. It was found that at low $N_2$ flow rate indicating high III/V flux ratio, the growth rate of GaN thin films was controlled by $N_2$ flux, and at high $N_2$ flow rate the growth rate was not controlled by $N_2$ flux any longer. It was also found that III/V flux ratio affected film quality. The film grown at higher $N_2$ flow rate showed low background carrier concentration, higher carrier mobility, and narrow FWHM in band-edge emission of low temperature PL. It is thought that the film in more Ga flux region was grown by 2-dimensional layer-by-layer growth mode, and the film in more nitrogen region was grown by 3-D island growth mode. All samples exhibited a good crystallinity.