• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.94-104
• /
• 2012

The purpose of this research is to quantify the compliance of on-road emission from a light duty diesel vehicle, based on a comparison to emission regulation standard. $NO_x$, CO and THC emissions were measured using a portable device on a selected real-world driving route with a length of approximately 22 km. On-road measurements were repeated by 10 times on a same route to reflect variability in traffic conditions. A test route was divided into 22 road links with length of 1 km to analyze emission results with higher spatial resolution. The average emissions of $NO_x$, CO and THC over total travel distance, which is approximately 220 km, were quantified to be in compliance with emission regulation standards. Under higher spatial resolution, $NO_x$ concentration exceeded a standard in 92 links out of 220 links. The extended time in stop period and the stop-and-go driving cycle were identified as two important reasons for increased $NO_x$ emissions in observed cases. Heavy traffics showed higher $NO_x$ emissions than free flow. These results indicate that the real-world vehicle emissions might exceed the compliance level associate with traffic conditions. Another interesting observation of this research is that the on-road emission characteristics can be independent to the average speed of road links with higher spatial resolution. Variability in on-road emission might not be fully described by solely relying on an average speed, because variability in traffic conditions and road conditions can influence on real-world vehicle emissions.

• 한국해양학회지
• /
• 제22권3호
• /
• pp.191-206
• /
• 1987

금강을 통하여 연간 평균 64억톤의 담수가 유입되는 금강 하구(Keum River Estuary)는 총 유출량의 60%이상이 여름에 집중되어, 건기(low-descharge period) 및 우기(high-discharge period)가 뚜렷이 구별되는 강하구 환경(estuarine environment)을 이루고 있다. 금강 하구는 우기중 일부를 제외한 전 기간에서 높은 SPM(Suspended Particulate Matter)이 형성되기도 한다(Lee and Kim, 1987). Photosynthesis는, 금강하구가 금강, 생활 하수등을 통한 공급으로 영양염들이 항상 충분히 존재하는 환경임에도 불구하고, SPM의 농도가 매우 낮았던 우기중에만 활 발히 진행되었다. 이는 금강하구에 있어서, SPM의 농도가 빛에너지 차단 등을 통하 여 일차 생산 활동의 진행 여부를 결정짓는 가장 중요한 요인으로 작용하고 있기 때문인 것으로 생각된다. Nitrification은 건기중 무기질 화합물들과 관련되어 진행되 는 가장 중요한 respiration 작용으로서, SPM이 높은 지역에서 활발히 진행되고 있 었으며, turbidity maximum형태에 따라 크게 두가지 형(ammonia-nitrite산화과정 및 ammonia-nitrate 산화 과정)이 관측되었다.Nitrate생성은 turbidity maximum이 매우 좁은 지역안에 형성되었던 시기에 이 구간내에서 관측되었고, Nitrate 생성은 turbidity maximum 이 강하구 전역에 걸쳐 넓게 형성되었던 시기에 강 하구 전역 에서 진행되고 있었다. 이것은 수괴가 높은 SPM지역에 머무를 수 있는 시간에 따 라 반응 형태가 좌우되어, 이 시간이 짧은 경우에 nitrete까지, 충분히 긴 경우에는 nitrate까지 ammonia가 산화되기 때문에 나타난 결과로 생각된다.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.69-77
• /
• 1996

The fatigue crack initiation behavior of plasma ion nitrided SACM645 steel was investigated through the rotary bending fatigue test and residual stress measurement by XRD. It was shown by XRD and EPMA that the plasma ion nitrided surface was composed of ${\gamma}^{\prime}(Fe_4N)$phase and ${\varepsilon}(Fe_{2-3}N)$phase, and that the nitrogen atoms existed in Fe matrix in diffusion layer. The OM, SEM and Auger spectroscopy showed that the depth of compound layer, mixed compound and diffusion layer, and diffusion layer was $8{\mu}m$, $30{\mu}m$ and $300{\mu}m$, respectively. However, the microhardness test showed that the depth of hardened layer was $500{\mu}m$. The tensile strength of the ion nitrided SACM645 was lower than that of the unnitrided SACM645, and the ion nitrided specimen was fractured without plastic deformation. The nitrided SACM645 showed much poorer low cycle fatigue properties than the unnitrided one. In rotary bending fatigue, the fatigue strength of the ion nitrided SACM645 was higher than that of the unnitrided specimen, and the fatigue crack initiation sites changed by applied fatigue stress levels. The XRD result showed that the ion nitrided SACM645 has the compressive residual stress from surface to $600{\mu}m$ deep and the tensile residual stress from $600{\mu}m$ to deeper site. It is thought that crack initiation takes place at the point where the total stress of residual stress and applied stress is maximum.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.179-189
• /
• 2008

The performance of Lean NOx Trap (LNT) based on the catalysts of Pt/K/Ba/$\gamma-Al_2O_3$ with proprietary washcoat formulation is studied using a bench flow reactor system. To investigate the effect of temperature and gas hourly space velocity (GHSV) on the nitrogen oxides (NOx) trapping capacity as well as NOx breakthrough time and final ratio of $NO_2$ to NO of LNT, series of adsorption isotherms are carried out with simulated exhaust gases of the lean burn engines. Since typical operation of LNT requires periodic regeneration with a short rich excursion, where the stored or trapped NOx is released and subsequently reduced to $N_2$, the effect of the duration of lean and rich phase and type of reductants on the NOx conversion is investigated. NOx storage capacity and breakthrough time obtained from adsorption isotherms shows a volcano-type dependence on the temperature with a maximum NOx storage capacity occurring $350^{\circ}C$ and with a maximum breakthrough time occurring $400^{\circ}C$ at all GHSVs investigated in this study. Also, maximum ratio of $NO_2$ to NO is obtained at $400^{\circ}C$ with a GHSV of $75,000\;hr^{-1}$ Lean/rich cycle of 100 s lean and 5 s rich used with a concentration of 1.33% of $H_2$ and 4% of CO in the rich phase is found to be optimum at operating temperature of $350^{\circ}C$ and a GHSV of $50,000\;hr^{-1}$.

• Clinical and Experimental Reproductive Medicine
• /
• 제29권4호
• /
• pp.229-236
• /
• 2002

Objective : The purpose of this study was to evaluate the effect of Cytochalasin B (CCB) on the cytoskeletal stability of mouse oocyte frozen by vitrification. Methods : Mouse oocytes retrieved from cycle stimulated by PMSG and hCG were treated by CCB and then vitrified in EFS-30. These oocytes were placed onto an EM grid and submerged immediately in liquid nitrogen. Thawing of the oocytes was carried out at room temperature for 5 seconds, then the EM grid was placed into 0.75 M, 0.5 M and 0.25 M sucrose at $37^{circ}C$ for 3 minutes, each. These oocytes were fixed in 4% formaldehyde for an hour and then washed in PPB for 15 minutes 3 times, then incubated in PPB containing anti-tubulin monoclonal antibody at $4^{circ}C$ overnight. And then, the oocytes were incubated with FITC-conjugated anti-mouse IgG and propidium iodide (PI) for 45 minutes. Pattern of microtubules and microfilaments of oocytes were evaluated with a confocal microscope. Results: The rate of oocytes containing normal microtubules and microfilaments was significantly decreased after vitrification. The rate of oocyte containing normal microtubules in CCB treated group was higher than those in non-treated group (53.7% vs. 48.9%), but the difference was not significant. The rate of oocyte containing normal microfilaments in CCB treated group was significantly higher than those in non-treated group (64.5% vs. 38.3%, p<0.05). Conclusion: Microfilaments stability could be improved by CCB treatment prior to vitrification. It is suggested that CCB treatment prior to vitrification improve stability of cytoskeleton and then increase success rate in IVF-ET program using vitrification and thawing oocyte.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.65-68
• /
• 2012

Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

• 한국축산식품학회지
• /
• 제34권6호
• /
• pp.742-748
• /
• 2014

This study was conducted to evaluate the activities of antioxidant enzyme (glutathione peroxidase (GSH-Px)) and lysosomal enzymes (alpha-glucopyranosidase (AGP) and beta-N-acetyl-glucosaminidase (BNAG)) of the longissimus dorsi (LD) muscle from Hanwoo (Korean cattle) in three freezing conditions. Following freezing at -20, -60, and $-196^{\circ}C$ (liquid nitrogen), LD samples (48 h post-slaughter) were treated as follows: 1) freezing for 14 d, 2) 1 to 4 freeze-thaw cycles (2 d of freezing in each cycle), and 3) refrigeration ($4^{\circ}C$) for 7 d after 7 d of freezing. The control was the fresh (non-frozen) LD. Freezing treatment at all temperatures significantly (p<0.05) increased the activities of GSH-Px, AGP, and BNAG. The $-196^{\circ}C$ freezing had similar effects to the $-20^{\circ}C$ and $-60^{\circ}C$ freezing. Higher (p<0.05) enzymes activities were sustained in frozen LD even after 4 freeze-thaw cycles and even for 7 d of refrigeration after freezing. These findings suggest that freezing has remarkable effects on the activities of antioxidant enzyme and lysosomal enzymes of Hanwoo beef in any condition.

• Ocean and Polar Research
• /
• 제32권3호
• /
• pp.309-319
• /
• 2010

To assess community structure and diversity of archaea, a clone sequencing analysis based on an archaeal 16S rRNA gene was conducted at three sediment depths of the continental slope and Ulleung Basin in the East Sea. A total of 311 and 342 clones were sequenced at the slope and basin sites, respectively. Marine Group I, which is known as the ammonia oxidizers, appeared to predominate in the surface sediment of both sites (97.3% at slope, 88.5% at basin). In the anoxic subsurface sediment of the slope and basin, the predominant archaeal group differed noticeably. Marine Benthic Group B dominated in the subsurface sediment of the slope. Marine Benthic Group D and Miscellaneous Crenarchaeotal Group were the second largest archaeal group at 8-9 cm and 18-19 cm depth, respectively. Marine Benthic Group C of Crenarchaeota occupied the highest proportion by accounting for more than 60% of total clones in the subsurface sediments of the basin site. While archaeal groups that use metal oxide as an electron acceptor were relatively more abundant at the basin sites with manganese (Mn) oxide-enriched surface sediment, archaeal groups related to the sulfur cycle were more abundant in the sulfidogenic sediments of the slope. Overall results indicate that archaeal communities in the Ulleung Basin show clear spatial variation with depth and sites according to geochemical properties the sediment. Archaeal communities also seem to play a significant role in the biogeochemical carbon (C), nitrogen (N), sulfur (S), and metal cycles at each site.

• Journal of Microbiology and Biotechnology
• /
• 제26권11호
• /
• pp.1891-1907
• /
• 2016

Yeasts that are present in marine environments have evolved to survive hostile environments that are characterized by high exogenous salt content, high concentrations of inhibitory compounds, and low soluble carbon and nitrogen levels. Therefore, yeasts isolated from marine environments could have interesting characteristics for industrial applications. However, the application of marine yeast in research or industry is currently very limited owing to the lack of a suitable isolation method. Current methods for isolation suffer from fungal interference and/or low number of yeast isolates. In this paper, an efficient and non-laborious isolation method has been developed and successfully isolated large numbers of yeasts without bacterial or fungal growth. The new method includes a three-cycle enrichment step followed by an isolation step and a confirmation step. Using this method, 116 marine yeast strains were isolated from 14 marine samples collected in the UK, Egypt, and the USA. These strains were further evaluated for the utilization of fermentable sugars (glucose, xylose, mannitol, and galactose) using a phenotypic microarray assay. Seventeen strains with higher sugar utilization capacity than the reference terrestrial yeast Saccharomyces cerevisiae NCYC 2592 were selected for identification by sequencing of the ITS and D1/D2 domains. These strains belonged to six species: S. cerevisiae, Candida tropicalis, Candida viswanathii, Wickerhamomyces anomalus, Candida glabrata, and Pichia kudriavzevii. The ability of these strains for improved sugar utilization using seawater-based media was confirmed and, therefore, they could potentially be utilized in fermentations using marine biomass in seawater media, particularly for the production of bioethanol and other biochemical products.

• 한국수산과학회지
• /
• 제35권4호
• /
• pp.356-365
• /
• 2002

One of the most important factors that cause eutrophication is nutrient materials containing nitrogen and phosphorus which stem from excreation of terrestial sources and release from sediment. Therefore, to improve water quality, the reduction of these nutrients loads should be indispensible. At this study, the three-dimensional numerical hydrodynamic and ecosystem model, which was developed by Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the eutrophication. The residual currents, which were obtained by integrating the simulated tidal currents over 1 tidal cycle, showed the presence of a typical counterclockwise eddies between Gyewha and Garyuk island. Density driven currents were generated westward at surface and eastward at the bottom in Saemankeum area where the fresh waters are flowing into, The ecosystem model was calibrated with the data surveyed in the field of the study area in annual average. The simulated results were fairly good coincided with the observed values within relative error of $30\%$. The simulations of DIN and DIP concentrations were performed using ecosystem model under the conditions of $40\~100\%$ pollution load reductions from pollution sources. In study area, concentration of DIN and DIP were reduced to $59\%$ and $28\%$ in case of the $80\%$ reduction of the input loads from fresh water respectively. But pollution loads from sediment had hardly affected DIN and DIP concentration, The $95\%$ input load abatement is necessary to meet the DIN and DIP concentration of second grade of ocean water quality criteria.