• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.55-60
• /
• 2014

Food waste leachate (FWL) is a serious pollutant waste coming from the food waste recycling facilities in Korea. FWL has a high organic matter content and high COD to nitrogen (COD/N) ratio, which can disturb efficient methane production in the anaerobic digestion of FWL. In the present study a microalga, Clorella vulgaris (C.V), was used as co-substrate for the FWL anaerobic digestion in order to supply nutrients, decrease the COD/N ratio and increase its methane yield. Different co-digestion mixtures (COD/N ratios) were studied by using biochemical methane potential test and modified Gompertz equation for kinetic study. Mixed substrate of FWL and C. vulgaris in the co-digestion clearly showed more the biomethane yield than the sole substrates. The maximum methane production, 827.7 mL-$CH_4$/g-VS added, was obtained for COD/N ratio of 24/1, whereas the highest improvement of methane yield was found for COD/N ratio of 15/1.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.63-69
• /
• 2017

Small size privately owned wastewater treatment plants have been difficult to treat their wasted sludge and maintain steady effluent quality compared with publicly owned wastewater treatment plants. Therefore, this study has focused on treatment efficiency enhancement, specially nitrogen removal efficiency by recycling dewatering filtrate as an alkalinity additive from filter press using $CaCO_3$. As the result, it was found that the optimal mixing ratio between the excess sludge and $CaCO_3$ was 1:2. The major operation parameters such as specific substrate utilization rate, specific nitrification rate, and specific denitrification rate were also improved 64% ($0.048-0.079mg\;BOD_5/mg\;MLVSS{\cdot}day$), 35% ($0.020-0.027mg\;NH_3-N/mg\;MLVSS{\cdot}day$) and 68% ($0.051-0.086mg\;NO_3{^-}-N/mg\;MLVSS{\cdot}day$), respectively, after the adoption of new methods. Therefore, both the problem of sludge treatment at small scale plants and the need for efficiency improvement could be solved.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.676-685
• /
• 2012

As impermeable layer continues to increase with the urbanization process, direct input of nonpoint source pollutants into water bodies via stormwater has caused serious effects on the aquatic ecosystem. Potential applications of rain gardens are increasing not only as best management practices (BMP) for reducing the level of nonpoint source pollutants but also as an ecological engineering alternative for low impact development (LID). In this study, remediation performance of various planting types, such as a mixed planting system with shrubs and herbaceous plants, was assessed quantitatively to effectively manage stormwater and increase landscape applicability. The mixed planting system with Rhododendron lateritium and Zoysia japonica showed the highest removal performance of $76.9{\pm}7.6%$ and $58.4{\pm}5.0%$ for total nitrogen and $89.9{\pm}7.9%$ and $82.4{\pm}5.2%$ for total phosphorus at rainfall intensities of 2.5 mm/h and 5.0 mm/h, respectively. The mixed planting system also showed the highest removal performance for heavy metals. The results suggest that a rain garden with the mixed planting system has high potential applicability as a natural reduction system for nonpoint source pollutants in order to manage stormwater with low concentrations of pollutants and will increase water recycling in urban areas.

• Mycobiology
• /
• v.36 no.3
• /
• pp.157-160
• /
• 2008

This study was carried out to determine the possibility of bottle cultivation utilizing recycled oyster mushroom culture waste as a cultivating substrate for P. ostreatus. Total nitrogen percentage was 0.76%, 1.13%, 1.16%, 1.36%, and 1.38% in the 1-, 2-, 3-, 4-, and 5-time mixed substrate, respectively; 0.95%, 1.04%, 1.34%, 1.36%, and 1.25% in the 1-, 2-, 3-, 4-, and 5-time postharvest substrate, respectively; and 0.72% and 0.68% in the 2- and 3-time nonadditive substrate, respectively. Weight of the fresh fruiting body harvest was 115 g, 120 g, 117 g, 118 g, and 114 g on 1-, 2-, 3-, 4-, and 5-time mixed substrate, respectively; and 105 g and 45 g on 2- and 3-time nonadditive substrate, respectively. The first mixed substrate (fresh) and recycled substrates generated no significant difference in the weight of fresh fruiting bodies harvested.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.279-284
• /
• 2006

Activated carbon is proposed as a new application of wastepaper recycling other than the paper-making. Waste kraft bag is considered to be a suitable raw material for activated carbon because of its low ash content. Small pellets of wastepaper squeezed out from the continuous kneader were carbonized in a nitrogen atmosphere and activated using carbon dioxide. The BET specific surface areas of activated carbon prepared from waste kraft bag was $1,285m^{2}/g$, which is higher than commercially available activated carbons. The activated carbon prepared from wastepaper has a well-developed porous structure, particularly in mesopore and macropore ranges. As a result, activated carbon with iodine adsorption capacity of 1,400 mg/g was obtained from waste kraft bag. In this paper, adsorption amount of Bisphenol A (BPA) was determined to investigate adsorbability of activated carbon from waste kraft bag. Adsorption measurements were on solutions ranging from $0.1{mu}g/L\;to\;100mg/L$. The activated carbon from waste kraft bag gave higher BPA adsorbabilities over a wide range, compared with commercially available activated carbons.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• 한국해양학회지
• /
• v.23 no.4
• /
• pp.194-206
• /
• 1989

Seasonal variations of nutrients (ammonium, nitrite, nitrate, phosphate and silicate), primary productivity and ammonium regeneration rate of macrozooplankton were investigate to understand the relationship between nitrogen recycling and nitrogen requirement by phytoplankton from Feburuary 1986 to November 1987 in the Kyunggi Bay, shallow estuarine water of Yellow Sea. In general, nutrients increased during the winter and depleted during the spring and the early summer except temporally sharp increase after flood in September. Ammonium was prevalently generally found in high concentration throughout the study area and it occasionally raised N/P ratio in the range of 30 to 70 as in the freshwater environment. Daily net primary productivity ranged from 30.3 to 3580.0 mgC/$m^2$/d with an average of 883.9 mgC/$m^2$/d. Annual primary productivity was determined to be 320.0 gC/$m^2$/yr. Carbon assimilation number ranged from 2.9 to 19.4 mgC/mg chl-a/h which increased in the summer and decreased in the winter. Nitrogen requirement by phytoplankton ranged from 0.4 to 45.0 mg at-N/$m^2$/d and turnover time of inorganic nitrogen ranged from 2.4 in the late summer to 122.7 days in the winter. Nitrogen regeneration rate of mixed macrozooplankton determined by bottle incubation method ranged from 0.02 to 1.34 mg at-N $m^2$/d and it could contribute from 2.8 to 38.7% with an annual average of 14.9% of total nitrogen requirement by phytoplankton in this shallow estuarine environment.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.29-34
• /
• 2009

This study was performed under four operational conditions for nitrogen removal in metal finishing wastewater. The conditions include electrode gap, reducing agent, the recycling of treated wastewater in 1st step and the simultaneous treatment of nitrate and other materials. Result showed that the removal efficiency of $NO_3{^-}-N$ was highest at the electrode gap of 10 mm. As the electrode gap was shorter than 10 mm, the removal efficiency of $NO_3{^-}-N$ decreased due to increasing in concentration polarization on electrode. And, in case that the electrode gap was longer than 10 mm, the removal efficiency of $NO_3{^-}-N$ increased with an increase in energy consumption. Because hydrogen ions are consumed when nitrate is reduced, reducing reaction of nitrate was effected more in acid solution. As 1.2 excess amount of zinc was injected, the removal efficiency of $NO_3{^-}-N$ increased due to increasing in amount of reaction with nitrate. As the effluent from 1st step in the reactor was recycled into the 1st step, the removal efficiency of $NO_3{^-}-N$ increased. Because the zinc were detached from the cathode and concentration-polarization was decreased due to formation of turbulence in the reactor. The presence of $NH_4{^+}-N$ did not affect the removal efficiency of $NO_3{^-}-N$ but the addition of heavy metal decreased the removal efficiency of $NO_3{^-}-N$. As chlorine is enough in wastewater, the simultaneous treatment of nitrate and ammonia nitrogen may be possible. The problem that heavy metal decrease the removal efficiency of $NO_3{^-}-N$ may be solved by increasing current density or using front step of electrochemical process for heavy metal removal.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.3
• /
• pp.27-36
• /
• 2020

This study investigates the changes in inorganic composition and the microbial counts during the process of fermentation of mixed domestic organic resources for the development of alternatives for imported oil cake, and examines the characteristics of mixed fermentation organic fertilizer (MFOF). The effect of the MFOF on the lettuce growth is investigated in order to evaluate the possibility of replacing the existing mixed oil cake with the MFOF. Six kinds of domestic by-product resources, which are rice bran, distiller's dried grains, sesame meal, fish meal, and spent mushroom substrate, are mixed by mixing ratio and the composition was analyzed during the fermentation process for 90 days under moisture content 30% and sealed condition. During the 90 days of fermentation, the pH change of the MFOF was little, and the moisture content was maintained at 34-35% until the 60^th day of fermentation, and then decreased to 30-31% on the 90^th day. Total nitrogen content remained unchanged during the fermentation period, but total carbon content showed a significant difference on the 21^st day of fermentation. It was confirmed that the content of fertilizer composition (nitrogen, phosphate, and potash) of the MFOF was 8.7% or more, which is suitable for the minimum amount standard of the main nutrients to be contained in the organic fertilizer. During the fermentation process of organic fertilizer, the density of bacteria and actinomycetes increased until 60 days and 30 days, respectively, and thereafter little changes were shown, and fungal population showed an increasing trend. As a result of lettuce cultivation test in the greenhouse by applying the MFOF, the growth and yield were comparable to that of using the existing mixed oil cake fertilizer when 100% was applied based on crop standard nitrogen fertilizer level. The use of mixed fermentation organic fertilizer made with domestic by-product resources can be used for use in farms in the future and is expected to contribute to the stable production of environment friendly agricultural products.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.49-56
• /
• 2019

This experiment was conducted to select an optimum application rate of blended biochar pellet as slow release fertilizer during cabbage cultivation. The blended biochar pellet made with a combination(4:6) of biochar and pig manure compost with unloading N, P, K solutions for adjusting about 9% of total nitrogen(TN). The treatments were consisted of the control as recommended application rates for cabbage cultivation in National Institute of Agricultural Sciences, N 40%, N 40% and 0.07M MgO and N 60 % of the blended biochar pellet, respectively, based on nitrogen application of recommended rates to cabbage cultivation. Changes of $NH_4-N$, $NO_3-N$, $P_2O_5$ and $K_2O$ concentrations in the soil and growth characteristic and yield components were investigated and observed during the cabbage cultivation. The experimental result shown that contents of $NH_4-N$, $NO_3-N$ and $K_2O$ of soil in the N 40% were significantly difference(p<0.01) with the control. $P_2O_5$ concentrations of soil in the N 40% were highest among the treatments. The fresh weight per cabbage in the N 40% was not significantly different(p>0.05) from the control, but in the N 40% and 0.07M MgO and N 60% was lower than that of the control. It was considered that an optimum blended biochar application rate for cabbage cultivation was 40% of recommended nitrogen application.