• Title/Summary/Keyword: Nitorgen

Search Result 24, Processing Time 0.02 seconds

Comparison of Combustion, Emissions and Efficiency Characteristics as Varying Spark Timings and Excess air ratios in an Ammonia-fueled Direct Injection Spark Ignition Engine (직접분사식 암모니아 전소 엔진에서 점화 시기와 공기과잉률의 변경에 따른 연소 및 배기, 효율 특성 비교)

  • Yonghun Jang;Cheolwoong Park;Yongrae Kim;Young Choi;Chanki Min;Seungwoo Lee;Hongkil Baek;Jeongwoo Lee
    • Journal of the Korean Institute of Gas
    • /
    • v.27 no.3
    • /
    • pp.1-10
    • /
    • 2023
  • Due to the development of the industrial revolution, regulations on exhaust emissions have been continuously strengthened to reduce the rapidly increasing greenhouse gas emissions. The use of environmentally friendly fuels is essential to meet these regulations. Hydrogen has been attracting attention as a future environmentally friendly fuel, but due to its material properties, it faces significant challenges in handling and storage. As an alternative, ammonia has been proposed. Ammonia can be easily liquefied at room temperature compared to hydrogen and has a high energy density. In order to examine the applicability of ammonia as an engine fuel, experiments were conducted to investigate the effects of changes in combustion control parameters in a direct injection ammonia combustion engine. The experiments were conducted by varying two variables: spark timing and excessive air ratio. Observations were made on combustion stability and the trends of exhaust emissions such as nitrogen oxides and unburned ammonia under the conditions of an engine speed of 1,500 rpm and medium to high loads (brake torque of 200 Nm). By optimizing the combustion control parameters, conditions for stable combustion even when using ammonia as the sole fuel were identified, and plans are underway to apply strategies for future expansion of the operating range.

The Potential Herbage Production of Reed Canarygrass (Phalaris arundinacea L. ) using Uncultivated Rice Paddy. I The effect of mineral nitrogen fertilization according to cutting frequencies on dry matter yield on Reed canarygrass (유휴 논토양을 이용한 Reed Canarygrass의 잠재생산성에 관한 연구 I. 예취빈도에 따른 무기태 질소의 시비가 Reed Canarygrass의건물수량에 미치는 영향)

  • 이주삼;조익환;안종호;김성규
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.14 no.4
    • /
    • pp.271-280
    • /
    • 1994
  • The aim of this experiment was to investigate the effects of fertilizing mineral nitrogen on dry matter yield of Reed canarygrass and also to estimate proper levels of fertilizing nitrogen when uncultivated rice paddy rapidly increased these days, was used for the production if Reed canarygrass. \ulcornerhe results are as follows. 1. Relative dry matter according to cutting frequency was appeared the highest at the 2nd cut for 3 and 4 cutting frequencies, and the 3rd cut for 5 cutting frequency. Those were 43.1, 34.0 and 34.1 % respectively. 2. When using only phosphrous and potassium, the average dry matter per year and ha was between 9.0 and 12.0 tons(3, 4 and 5 cutting frequency) and the highest dry matter was shown at 5 cutting frequency. 3. In accordance to the increase in the fertilization of nitorgen, the yield of dry matter was increased and, when 30 kg/ha/cut of mineral nitrogen was added, the biggest increase rate per added nitrogen for dry matter yield per year compared to that of no fe~tilization of nitrogen was recorded and it was 2.7, 3.3, and 3.4 tons/ ha for 3, 4 and 5 cutting frequencies respectively. 4. The efficiencies of mineral nitrogen on dry matter yield(DM kg/N kg) were the highest when 30kg nitrogen was applied particularly in 3, 4 and 5 cutting frequencies(29.7, 27.2, 22.8 DM kg/N kg). It recorded the highest of all the treatments. The efficiency was actually decreased in higher application of mineral nitrogen. The total nitrogen yield efficiency was the highest in 30kg(0.45kg and 0.48kg at 4 and 5 cutting frequency) and 60kg fertilization/ha/cut (0.46kg at 3 cuting frequency) and the decreased efficiencies appeared at fertilization of higher nitrogen. 5. Economical borden of mineral nitrogen fertilization were between 199.2 and 243.3kglha at 3 cutting frequency, between 253.4 and 295.9kg at 4 cutting frequency and between 302.2 and 361.3kg at 5 cutting frequency. 6. Under the condition of this experiment, the cutting frequency leading the potential production at maximum was 3 cutting frequency. At 3 cutting frequency, the efficiency of nitrogen utilization was higher and 15 or 16 tons of dry matter was obtained which is a level of economical border at fertilization between 200 and 240kglha. It wrs possible to obtain the maximal dry matter yield(l7 tonslha) at fertilization of lower level than 400kgl ha.

  • PDF

Evaluation of Characteristics of Particle Composition and Pollution of Heavy Metals for Bottom Sediments in Cheonsu Bay, Korea -Comparison of the Sediments Environment of Farming Area and Non-farming Area (천수만 해저 퇴적물의 입도특성 및 중금속 오염도 평가 -어장해역과 비어장해역의 퇴적환경 비교-)

  • Kim, Jong-Gu;Jang, Hyo-Sang
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.4
    • /
    • pp.358-371
    • /
    • 2014
  • For the systematic scientific management in Cheonsu Bay of Korea, this study was conducedt to survey the particle composition, organic matter(I.L.) and heavy metals in farming and non-farming areas. The sediment of study area showed feature mixed property by sand, silt and clay. The farming area showed superior by fine-grained sediment, non-farming area showed superior by coarse-grained sediment. The organic pollution of farming area were appeared to be heavily polluted more than non-farming area. The concentration of total nitorgen in sediment was higher farming area than non-farming area. Also, in the case of heavy metals pollution in sediments, farming area was higher than non-farming area. The correlation analysis among to heavy metals, organic matter and particle size was found to have a good interrelationship. For evaluation of heavy metals pollution of sediments, three criteria are applied, Enrichment Factor(EF), Geoaccumulation index(Igeo) and NOAA criteria for sediment. In the case of EF, Heavy metals pollution was appeared to artificial effect all heavy metals if except Cu. In the case of Geoaccumulation index, Cu, Al, Pb was shown zero grade, that is non polluted group, and Cd, Hg, Cr was shown to 0~1 grade, that is mid polluted group, As was shown to 2 grade, that is moderately polluted group. In the case of NOAA, pollution levels of heavy metals except Cd belonged to a group of ERL(Effect range low)~ERM(Effect range median).

The Ripening of Camembert Cheese Made with Mucor Miehei Rennet (Mucor Miehei 응유효소(凝乳酵素)로 제조(製造)한 Camembert Cheese의 숙성(熟成)에 관(關)한 연구(硏究))

  • Park, Mooh Il;Kim, Jong Woo
    • Korean Journal of Agricultural Science
    • /
    • v.16 no.2
    • /
    • pp.179-200
    • /
    • 1989
  • Mucor miehei rennet(MR) was added as calf rennet(CR) substitutes in the fixed amounts of mixed rennets in making Camembert cheese. The conditions in the variations of chemical composition: water-soluble nitrogen, non-caseinic nitrogen, non-proteinic nitrogen, amino nitrogen, ammoniacal nitorgen, electrophoresis, molecular fractionation, mineral distribution, texture characterisitics, free amino acids and free fatty acids, were checked up with the sensory test and the chesse yields at each ripening period. The results obtained by investigating the utility of Mucor rennet were summarized as follows: 1. CR chesse, MR cheese and the mixed-rennet chesse failed to show any significant difference in their yields of 15%. 2. The contents of protein, fat and ash in MR cheese gave lower value than CR cheese did and with progress of ripening lactose decreased rapidly after 14 days of ripening. The difference among the rate of addition of mucor rennet was not recognized. 3. The WSN contents of 5 fresh sample chesse were from 14.7% to 17.3% and WSN increased from 39.7% to 41.0% with progress of ripening. After 21 days of ripening MR chesse had more WSN than CR cheese did. In NCN and ammoniacal nitrogen MR cheese showed higher value. 4. As the ripening progressed, MR chesse showed more cystein, phenylalanine and proline than CR chesse did but it failed to show any increase in aspartic acid, threonine and glutamic acid etc. 5. In the content of free fatty acid MR chesse showed higher value than CR cheese did and with the progress of ripening fatty acids increased from 8.36 mEq to 26.36 mEq but did not show any significant difference in the cheese types by the coagulant ratio. 6. Ca contents in the sample chesse were 0.238-0.27%, Mg 0.019-0.022%, Na 0.910-1.047%, and K 0.175-0.200%. The important non-sedimentable Ca in casein remained from 61 % to 77% without regard the ripening periods and added-rennets and Mg remained from 59.1% to 92.5% in non-sedimentable and water-soluble conditions. 7. In the fractionation of protein by ultrafilteration, MW> $5{\times}10^4$ decresed from 95% at the beginning period of ripening to 45% and MW< $10^4$ increased from 0.2% to 38% and definite caseinolysis was shown in all samples. 8. All the cheese showed to different electrophoretic patterns for the added-amounts of mucor rennet in the 14 days of ripenig. In the 28 days or ripening, MR cheese kept some bands on the patterns compared with CR cheese. 9. In vitro digestibility increased from 81.48-94.81 % to 94.47-98.61% but failed to show any significant difference in the cheese types by the coagulant ratio. 10. In hardness, MR cheese showed lower value compared with CR cheese as the ripening progressed. 11. The results of the sensory test failed to show any difference in flora rind, feelings in mouth and hands, deep structure, flavor and bitterness between CR Camembert cheese and MR Camembert chesse.

  • PDF