• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.273-281
• /
• 2010

To install turnout on the main line of high speed railway running 300km/h, measures of rail destressing of existing line, speed-up plan, shortening the installation time and other important technical measures should be considered to reduce the inconvenience of passenger. In particular, for the newly constructing Ohsong and Kimcheon-Gumi station in KyongBu high speed line, it must be difficult to install divided turnout part because it should be done within short night block out hours (6 hours per day) and KTX trains are safely serviced just in time, which is not only the first time in the domestic and but also very rare practical experience in the world. This thesis is covered with experienced work conditions, required equipments and various safety measures, etc.

• Korean Journal of Adult Nursing
• /
• v.24 no.5
• /
• pp.509-519
• /
• 2012

Purpose: This retrospective study was designed to examine the frequency of unplanned extubation, and to identify the related factors of unplanned extubation in medical intensive care unit patients. Methods: Data were collected from medical records of patients who received intubation in a medical intensive care unit. One hundred eighteen patient charts were selected for the study. The Patient Severity Classification Scale and unplanned extubation risk factors were examined. Data were analyzed with descriptive statistics, $x^2$-test, Fisher's exact test and Mann-Whitney U test. Results: The incidence of unplanned extubation was 11 (9.32%) out of 118 patients who had undergone intubation. There were statistically significant differences between the unplanned extubation and work shift ($x^2$=61.52, p=.001), ventilation mode (p=.001), number of days of ventilator application (U=366.00, p=.038) and administration of sedatives (p=.025). Conclusion: Unplanned extubation is affected by the following variables: a) whether a nurse is in night shift, b) whether ventilation is mandatory, c) duration of ventilation use and d) administration of sedatives.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.94-98
• /
• 2014

Osteoid osteoma can occur in all parts of the skeletal system. More than half occur in lower extremity and rare in wrist. Clinically pain is almost the only symptom worse at night and which is characterized by a rapid improvement by NSAID. We report the cases of osteoid osteoma which shows the characteristic symptoms and got a good results with appropriate imaging work up and surgical treatment.

• Korean Journal of Occupational Health Nursing
• /
• v.16 no.2
• /
• pp.147-157
• /
• 2007

Purpose: The purpose of this study was to identify job stress, burnout experience and job satisfaction in nurses and to identify their relationships. Method: The data were collected from 280 nurses employed in one general hospital, using the structured questionnaire. The data analyzed using SPSS Win program for descriptive statistics, t-test, ANOVA, and Pearson correlation coefficient. Result: There were significant differences in job stress, burnout experience and job satisfaction by current working unit, working period, scheduled to work as a nurse, cause to satisfaction, periods in night shift, level of adaptation, and health status. There was a significant positive correlation between job stress and burnout experience, and a inverse correlation between job stress and job satisfaction. Conclusion: The study findings show that job stress, burnout experience, and job satisfaction of nurses are correlated each other. Therefore, it is need to maintain a proper level of nurses' job stress and burnout experience through various ways to improve the situation. As a result, job satisfaction will be promoted and human resources will be managed appropriately.

• International Journal of Safety
• /
• v.5 no.1
• /
• pp.33-36
• /
• 2006

In laboratories, researchers frequently work using new methods with new tools and materials. So the workers in laboratories are exposed to risk from dangerous articles all the time. In the case of university laboratories, testing is done by the individual at night. Because of that, the risks in university laboratories are higher than in other places. In addition, students and managers in universities generally have little concern for laboratory safety. So students are sometimes injured or killed in laboratory accidents. In this study, 1,000 university students answered questions about university laboratory safety. Their answers have been analyzed to determine the state of actual conditions and to formulate countermeasures. The results indicate that we need to change the safety awareness of the universities and the students. Adequate safety training and safe practice must be implemented by each university to decrease accidents. Development of systematic safety training program suited to the specific conditions of the individual laboratory and formulation of specific counter plans should accidents occur are required.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.1
• /
• pp.91-98
• /
• 2007

Perimeter zone is one of the weakest area in buildings and it makes an increase of heating and cooling loads, in addition to condensation or discomfort with cold-draft to residents in winter. Because of this, it needs to be reinforced by active systems. However, they use fossil fuel, and ultimately greenhouse effect is urged. Thus, we proposed BIPV system functioned as solar collector which can substitute active system. As an fundamental stage, heat balance equation in steady-state by Fortran was used not only, in winter for pre-heating effect and electric power capacity during the day, but also in summer, for the latter during the day and sky radiation effect during the night. Especially, we should have considered shading on PV by IES Suncast, since even a little bit of it makes the efficiency too low for the PV modules to work. As a result, in summer day, the PV panel should be tiled in 70 degrees to gain the most electric power. Moreover, we could verify that this model makes higher temperature and heat flux under 0.02 m/s. On the other hand, the PV had the high efficiency with high velocity because of cooling effect behind the PV. Therefore, we should regard the air current distribution later on.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.3
• /
• pp.261-269
• /
• 2011

Purpose: The purpose of this study was to investigate occupational stress and fatigue level of neonatal nurses and to assess relationship between the two of them. Methods: Subjects were 109 neonatal nurses working at 2 university hospitals and 9 women's hospitals in D city, and the data were analyzed using descriptive statistics and binary logistic regression analysis by the SPSS/WIN 15.0. Results: The mean score of nurses' occupational stress level was 3.22, and the highest was 'night shift' among the 7 subcategories, and fatigue level was 62.0, and the highest was physical fatigue in configuration field. In logistic regression analyses, 'heavy workload' and 'inadequate physical environment' led to most occupational stress. Conclusion: In addition to significantly higher levels of occupational stress of neonatal nurses, the cumulative fatigue also resulted in decreased quality of nursing, job satisfaction and nursing productivity; therefore, appropriate number of nurses and improvement of work environment is necessary. Furthermore, to reduce the occupational stress and fatigue, we should try to develop adequate clinical guidelines and intervention strategies and apply them in neonatal care unit.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.141-146
• /
• 2018

The Ground Moving Target Indication(GMTI) technique can detect the moving targets on land using its Doppler returns. Also, the GMTI system can work in night regardless of the weather condition because it is an active sensor that uses the electromagnetic waves as its source. In order to develop the GMTI system, Constant False Alarm Rate(CFAR) threshold optimization is important because the main performances like detection probability, false alarm rate and Minimum Detectable Velocity(MDV) are related deeply with CFAR threshold. These key variables are used to calculate CFAR threshold and then trade-off between the variables is performed. In this paper, CFAR threshold optimization procedures are introduced, and the optimization results are demonstrated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.125-152
• /
• 1995

An Integrated Bridge System (IBS) is not an officially defined term, but a concept of which integrates on a consol at bridge the primary functions of stand-alone navigational aids and communication instruments or of stand-alone units which are integrated i.e. ARPA ECDIS It aims to enable officers on navigational watch to perform their duty without impairing proper lookout. IBS has been taking shape through a rapid development of navigation and communication systems in relation with bridge configuration bridge work station and one man bridge operation system. IBS related matters have been considered for years and is on the agenda of the International Maritime Organization(IMO) for its technical details and safety aspect of possible one-man watchkeeping at night. However IMO has made it clear that human element should be the key factor in considering IBS and single watchkeeping issue. In the development of IBS ergonomic element and human psychological aspect have been more emphasized than technical requirements. This paper refers to documents presented to the IMO and its progress made in various IMO technical meetings on the development of IBS which is perceived as an effective aid to proper bridge lookout and those standards adopted by classification societies on the composition of workstation at bridge in order to identify the international trend on regulating required equipment function of workstation of IBS the regulatory review process and technical recommendations related thereto.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.361-361
• /
• 2007

A lot of efforts have been paid to develop infrared imaging systems in last decades. Bolometer has a wide range of applications from military to commercial, such as military night vision, medical imaging system and so on. Bolometer is a resistive sensor that detects temperature changes through resistance change. To improve detecting ability, bolometer should have a good resistive film which has high temperature coefficient of resistance (TCR) value. Colossal magnetoresistance (CMR) $L_{1-x}A_xMnO_3$ (where L and A are trivalent rare-earth ions and divalent alkaline earth ions, respectively.) are received attention to apply bolometer resistive film because it has a high TCR property which was discovered in the metal to semiconductor phase transition temperature region. In this work, CMR films were deposited on various substrates in relative low substrate temperature by RF magnetron sputtering. The influence of deposition parameters such as substrate temperature, gas partial pressure, and so on have been studied. The structural and TCR properties of the films were also investigated for applying to microbolometer.