• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.295-300
• /
• 1995

In order to find out the natural content of heavy metals(Cd, Cu, Pb, Zn, Cr, Ni)in paddy soil of Korea, a total of 1,196 soil samples of 15cm top layers all over the country 1995 were collected and analyzed. The average heavy metal contents in soils were 0.133mg/kg of Cd, 4.52mg/kg of Cu, 4.62mg/kg of Pb, 3.90mg/kg of Zn, 0.362mg/kg of Cr and 1.38mg/kg of Ni. These results are similar to the results of survey conducted in 1981.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.97-103
• /
• 2009

Sericulturists in the vicinity of Bangalore city irrigate their mulberry gardens with Vrishabhavathy stream water, which is polluted with domestic and industrial wastes from the city. To investigate the effect of pollutants on silkworm crops, a detailed field survey was conducted to study the cocoon yield pattern of the crops raised on mulberry irrigated with wastewater as against irrigation by bore/open wells. The villages along the stream were grouped into five test batches at about a distance of $5{\sim}8$ km from each other. The seasonal yield data with relevant information were collected through questionnaires from 117 rearers using stream water and 35 rearers using bore/open wells, the latter serving as control group. The average yield for 100 layings was 46 to 57 kg in the control group whereas in test groups, it ranged between 34 to 51 kg in the first test group and 22 to 38 kg in the rest. The difference in yield was $9{\sim}19$ kg depending on the season between control and test batches. In summer, this difference was higher, with high co-efficient of variation in test groups ($33{\sim}52$%). Further, water, soil and leaf samples were collected from selected rearers and were analyzed for zinc, copper, iron, lead and nickel. Results indicated significantly higher contents of these metals in samples from gardens using wastewater when compared control samples. Significantly (p<0.05 & p<0.01)) higher levels of zinc ($24{\sim}122$ ppm) and iron ($208{\sim}683$ ppm) were noticed in mulberry leaves during summer followed by winter and rainy season. The significance of high content of heavy metals in mulberry leaves and cocoon yield pattern of this area in relation to the quality of irrigation water is discussed.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.253-262
• /
• 1995

The heavy metal contents of soils which had been contaminated with mine residues and green onion and lettuce which were grown on these soils were analyzed. The results obtained are summarized as follows: 1. Heavy metal contents in the soil where green onion and lettuce died back or were poor in growth were unusually high. 2. Heavy metal contents in the plants grown in the soil of high level of metals were also high, in the order of root > leaf > stem. In case of Mn, however, the content was the highest in the leaf. 3. Contents of Cd, Cu, Zn and Ni in soil were positively correlated with those in plant. In case of Pb, there was no consistent relationship between the contents in soil and plant. 4. Even in the soils where plant growth appeared to be normal the heavy metal contents both in soil and in plant were higher than the national average.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.239-243
• /
• 2008

Ni-W(1-5 at.%) alloy rods were made by powder metallurgy process including powder mixing, compacting and subsequent sintering. Ni and W powder of appropriate compositions were mixed by a ball milling and isostatically pressed in a rubber mold into a rod. The compacted rods were sintered at $1000^{\circ}C-1150^{\circ}C$ at a reduced atmosphere for densification. The lattice parameters of Ni-W alloys were estimated by a high resolution neutron powder diffractometer. All sintered rods were found to have a face centered cubic structure without any impurity phase, but the diffraction peak locations were linearly shifted with increasing W content. The lattice parameter of a pure Ni rod was $3.5238{\AA}$ which is consistent with the value reported in JCPDS data. The lattice parameter of N-W alloy rods increased by $0.004{\AA}$ for 1 atomic % of W, which indicates the formation of a Ni-W solid solution due to the substitution of nickel atoms by tungsten atoms of larger size.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.633-637
• /
• 2001

Oil fly ash is known as one source of raw materials from which vanadium and nickel metals can be recovered. The current recovery process of valuable metals from oil fly ash is mainly the hydrormetallurgy one. Nevertheless, a great amount about 50~80%, of unburned carbon remains as byproduct after hydrormetallursy process. In Taiwan, if hydrormetallursy processes have proceeded, it can be estimated that the annual production of unburned carbon is 25 thousand tons. From the viewpoint of resource recycling, this study is a preliminary study and investigates in recovery of sub micron- graphitized carbon from unburned carbon by a designed process. The designed process included the following steps: 1.selecting a portion with +400mesh size from unburned carbon; 2.treating the selected in ultrasonic waves; 3.using a 400mesh sieve to obtain the product which is under 400mesh; 4.Removal ash from the product. In regard to treatment by ultrasonic waves in the designed process, treating time of ultrasonic waves is a simple and only variance in this study. The results indicate that the production yields increase with the treating time of ultrasonic waves; the production yield in specific conditions of this study can reach about 23%, in which ash content in product is about 2.5%. According to results of SEM, TEM and XRD, the products from the designed process are flakes in shape, several microns in size and graphitized carbon in carbon crystal phase. Except to graphitized carbon, there are a little carbon blacks, which are graphite 2H in carbon crystal phase in the products. Conclusively, the designed process is possibly applicable, by which comes to the recovery of micron- graphitized carbon.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.13-19
• /
• 2008

In order to predict a remaining life of a plant, it is necessary to select the components that are critical to the plant life. The remaining life of those components shall be evaluated by considering the aging effect of materials used as well as numerous factors. However, when evaluating reliability of nuclear structural components, some problems are quite formidable because of lack of information such as operating history, material property change and uncertainty in damage models. Accordingly, if structural integrity and safety are evaluated by the deterministic fracture mechanics approach, it is expected that the results obtained are too conservative to perform a rational evaluation of plant life. The probabilistic fracture mechanics approaches are regarded as appropriate methods to rationally evaluate the plant life since they can consider various uncertainties such as sizes and shapes of cracks and degradation of material strength due to the aging effects. The objective of this study is to evaluate the structural integrity for a reactor pressure vessel under the small break loss of coolant accident by applying the deterministic and probabilistic fracture mechanics. The deterministic fracture mechanics analysis was performed using the three dimensional finite element model. The probabilistic integrity analysis was based on the Monte Carlo simulation. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.61-61
• /
• 2018

듀플렉스 스테인리스강은 페라이트와 오스테나이트 상이 공존하는 특징을 갖는다. 그러한 구조에 의해서 페라이트와 오스테나이트상의 장점을 동시에 갖는 특성이 있다. 높은 강도와, 우수한 내식성, 응력 부식 균열 그리고 낮은 니켈의 함량 때문에 안정적인 가격을 갖는 장점을 갖기 때문에 운송, 기름과 가스, 해양플랜트, 건축 그리고 높은 강도와 우수한 내식성이 필요한 분야에서 수요가 증가할 것으로 사료된다. 이러한 듀플렉스 스테인리스강의 형성에서 페라이트와 오스테나이트상의 균형과 내식성을 개선하기 위해 질소가 첨가된다[1,2]. 본 연구는 저니켈 듀플렉스 스테인리스강(STS 329 FLD)의 공식 형성 과정에서 질소의 함량이 공식 형성과 내식특성에 미치는 영향을 동전위분극, XPS(X-ray Photoelectron Spectroscopy) 그리고 GDOES(Glow Discharge Optical Emission Spectrometry)를 이용하여 규명하였다. GDOES를 이용하여 깊이별 원소 분포를 정량적으로 비교한 결과, 부동태막에서 질소는 기저에 비하여 증가하였고, 질소의 함량이 증가함에 따라 wt.% 또한 증가하였다. 이러한 부동태막의 깊이별 원소 분포특성이 내식특성과 공식의 크기에 미치는 영향을 동전위분극을 이용하였다. 질소의 함량이 증가하였을 경우, 부식전위는 증가하였으며, 부식전류는 감소하였다. 또한 부동태전류가 감소한 것을 확인할 수 있었다. 이러한 차이의 원인을 확인하기 위하여 XPS를 이용하여 질소의 화학적 상태를 확인하였다. 질소는 암모니아의 형태로 존재하는 것으로 확인되었다. 암모니아 상태로 부동태막에 존재함에 따라 공식이 형성될 때, 암모늄 화함물을 형성하여 공식 내부의 산성도를 낮춤으로써 공식의 형성이 억제된 것으로 사료된다. 또한 공식 이후의 표면을 관찰 할 경우 질소의 함량이 증가함에 따라 표면에서 공식이 거의 관찰되지 않았다.

• Korean Journal of Materials Research
• /
• v.28 no.5
• /
• pp.273-278
• /
• 2018

Lithium-ion batteries have been considered the most important devices to power mobile or small-sized devices due to their high energy density. $LixCoO_2$ has been studied as a cathode material for the Li-ion battery. However, the limitation of its capacity impedes the development of high capacity cathode materials with Ni, Mn, etc. in them. The substitution of Mn and Ni for Co leads to the formation of solid solution phase $LiNi_xMn_yCo_{1-x-y}O_2$ (NMC, both x and y < 1), which shows better battery performance than unsubstituted $LiCoO_2$. However, despite a high discharge capacity in the Ni-rich compound (Ni > 0.8 in the metal site), poor cycle retention capability still remains to be overcome. In this study, aiming to improve the stability of the physical and chemical bonding, we investigate the stabilization effect of Ca in the Ni-rich layered compound $Li(Ni_{0.83}Co_{0.12}Mn_{0.05})O_2$, and then Ca is added to the modified secondary particles to lower the degree of cationic mixing of the final particles. For the optimization of the final grains added with Ca, the Ca content (x = 0, 2.5, 5.0, 10.0 at.%) versus Li is analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.227-232
• /
• 2012

Galectins are generally believed to be potential candidates for use in the development of novel antiinflammatory agents or as selective modulators of the immune response. In particular, galectin-9 exhibits some of the extracellular functions, including cell aggregation, adhesion, chemoattraction, activation, and apoptosis. Tl-galectin (Tl-gal, galectin-9 homologue gene) was isolated from an adult worm of the Toxascaris leonina. The full-length Tl-gal gene, which was incorporated into pET-28a, was overexpressed in E. coli and purified by nickel affinity and gel filtration chromatographies. The purified Tl-gal was crystallized using the hangingdrop vapor-diffusion method. The crystal belonged to the tetragonal space group $P4_1$, with unit-cell parameters of a = b = $75.7\AA$ and c = $248.4\AA$. The crystals were obtained at $20^{\circ}C$ and diffracted to a resolution of $3.0\AA$. The asymmetric unit contained four molecules of Tl-gal, which gave a crystal volume per protein mass (Vm) of $2.8\AA^3Da^{-1}$ and a solvent content of 54.1%.