• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.271-272
• /
• 2008

We fabricated a pentacene thin-film transistor with Ni/Ag source/drain electrodes. Also, we obtained similar electrical characteristics as compared with source/drain electrode with Au. This device was found to have a field-effect mobility of about 0.021 $cm^2$/Vs, a threshold voltage of -5, -7 V, an subthreshold slope of 2.0, 4.5 V/decade, and an on!off current ratio of $3.6\times10^5$, $2.0\times10^6$.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.65-68
• /
• 2004

순간금형가열방법(MmSH injection process)과 일반적인 방법으로 사출된 ABS 위에 전자파를 차폐하기 위한 무전해 Ni 과 Ag도금을 하였다. 무전해 Ni의 경우, 알칼리성 도금욕일수록 도금속도가 증가하였고 순간금형가열방법으로 사출된 ABS가 일반적인 방법으로 사출된 ABS 보다 밀착력, 광택. 전자파 차폐효율이 다소 높은 값을 가졌으며 pH 8에서 5B의 밀착력, 509의 광택도와 76dB의 전자파 차폐효과를 나타냈다.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• 한국안광학회지
• /
• 제4권1호
• /
• pp.51-56
• /
• 1999

금속 안경테의 제조에 가장 많이 사용되는 범용 양백의 표면에 2%Ti-naphthanate toluene solution을 $TiO_2$의 전구체로 하여 sol-gel spin coating을 행하고 $500^{\circ}C$에서 열처리 한 코팅 층의 형성조건 및 표면 구조 그리고 표면색상을 Optical photometer외 색차계 그리고 X-선 회절분석기로 분석한 결과 다음과 같은 결론을 얻었다. $TiO_2$ 박막의 열처리 온도는 $500^{\circ}C$가 적정하였으며 1회 코팅 시의 평균 두께는 $0.24{\mu}m$이었으며 코팅 횟수 증가에 따라 직선적으로 증가하였다. $TiO_2$ 코팅 층의 결정구조는 비정질 상태로 존재하였고 색상은 코팅 횟수에 따라 변화하였으며 2회 코팅한 경우는 적색이 미세하게 출현하였으며 3회 코팅한 경우에는 검붉은 색이 발현되었다. 명도는 55.92(1회)에서 코팅 횟수가 증가함에 따라 점차 저하하였으며 a는 3회 코팅까지는 red계열로 증가하다가 급격히 저하하며, b는 꾸준히 감소하여 blue계열로 변화하는 경향을 보였다. 금 색상의 발현을 위해서는 1회 코팅인 $0.24{\mu}m$ 두께의 $TiO_2$ 비정질 막이 적합하였다.

• 자원리싸이클링
• /
• 제16권3호
• /
• pp.50-60
• /
• 2007

배터리는 공기아연 리튬 망간 산화은 수은 나트륨-유황 납축 니켈-수소 이차 니켈-카드뮴 리튬이온 알칼라인 전지 등의 여러 종류가 있다. 경제적, 효율적 관점에서 폐전지의 재활용 기술은 폭넓게 연구되어 왔다. 본 연구에서는 폐리튬 전지의 재활용 기술에 대한 특허를 분석하였다. 분석범위는 1986년$\sim$2006년까지의 미국, 유럽, 일본, 한국의 등록/공개된 특허로 제한하였다. 특허는 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링하였다. 특허동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내 보았다.

• 자원리싸이클링
• /
• 제17권2호
• /
• pp.76-84
• /
• 2008

배터리는 공기아연 리튬 망간 산화은 수은 나트륨-유황 납축 니켈-수소 이차 니켈-카드뮴 리튬이온 알칼라인 전지 등의 여러 종류가 있다. 경제적, 효율적 관점에서 폐전지의 재활용 기술은 폭넓게 연구되어 왔다. 본 연구에서는 폐망간 전지의 재활용 기술에 대한 특허를 분석하였다. 분석범위는 1986년${\sim}$2006년까지의 미국, 유럽, 일본, 한국의 등록/공개된 특허로 제한하였다. 특허는 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링하였다. 특허동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내 보았다.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.39-73
• /
• 1998

안경테는 국제적으로 대량 교역되는 상품의 하나이다. 그렇기 때문에 오늘날 국제표준화기구(ISO-TC172/SC7/WG2)에서는 독일, 미국, 영국, 이태리, 프랑스, 스페인, 일본 등의 안경관리 전문학자, 기술자, 제조업자 등이 모여 안경테의 국제 간 원활히 하고, 소비자에게는 이익과 service를 제공하고, 제조업자에게는 생산성제고와 제조원가를 절감할 수 있는 국제적 협력을 조장하기 위하여 안경테에 관한 용어, 측정법, 부품규격, 검사 및 시험방법 등에 관한 규정을 제정하고 있다. 그런데도 불구하고 우리나라의 안경업계가 이들 회원국의 활동에 관심이 없다는 것은 안경산업의 장래를 생각할 때 암울하기만 하다. 우리나라는 1970-1980년대에 걸쳐 수출이 연평균 약 20%이상 신장되었으나 1990년대 초반부터 수출실적은 미화 2억달라를 넘어선채 정체상태를 벗어나지 못하고 있다. 그런데 정체된 안경테의 수출을 진흥시키기 위해서는 무엇보다는 신소재와 독자적인 디자인의 개발, 국제표준규격에 준한 설계와 제작, 제조기술의 혁신, 특허정보의 활용 및 국제적인 판촉활동 등이, 활발히 전개되어야 하며, 대구광역시의 섬유기술연구소와 같은 형태의 안경기술연구소 또는 안경전문기술위원회의 발족과 정부차원의 적극적인 지원이 시급한 당면과제이다. 본 논문의 궁긍적 목표는 우리나라 안경제조업자에게 ISO-Working Group2 등이 제정 발표한 안경테의 관계규정 및 규격을 소개하고 금속테를 설계 제작할 때 보완할 이론적 지침을 제시해서 설계상 결함이 없는 금속테를 제작하는데 있다.

• Journal of Korea Trade
• /
• 제27권5호
• /
• pp.167-198
• /
• 2023

Purpose - This paper aims to compare and analyze the co-movements and information spillover effects between the international commodity futures markets and the South Korean stock markets during the COVID-19 and the 2008 financial crises. Design/methodology - The DCC-GARCH model is used in the co-movements analysis. In contrast, the BEKK-GARCH model is used to evaluate information spillover effects. The statistical data used is from January 1, 2005, to December 31, 2022. It comprises the Korea Composite Stock Price Index data and daily international commodity futures prices of natural gas, West Texas Intermediate crude oil, gold, silver, copper, nickel, soybean, and wheat. Findings - The results of the co-movement analysis were as follows: First, it was shown that the co-movements between the international commodity futures markets and the South Korean stock markets were temporarily strengthened when the COVID-19 and 2008 financial crises occurred. Second, the South Korean stock markets were shown to have high correlations with the copper, nickel, and crude oil futures markets. The results of the information spillover effects analysis are as follows: First, before the 2008 financial crisis, four commodity futures markets (natural gas, gold, copper, and wheat) were shown to be in two-way leading relationships with the South Korean stock markets. In contrast, seven commodity futures markets, except for the natural gas futures market, were shown to be in two-way leading relationships with the South Korean stock markets after the financial crisis. Second, before the COVID-19 crisis, most international commodity futures markets, excluding natural gas and crude oil future markets, were shown to have led the South Korean stock markets in one direction. Third, it was revealed that after the COVID-19 crisis, the connections between the South Korean stock markets and the international commodity futures markets, except for natural gas, crude oil, and gold, were completely severed. Originality/value - Useful information for portfolio strategy establishment can be provided to investors through the results of this study. In addition, it is judged that financial policy authorities can utilize the results as data for efficient regulation of the financial market and policy establishment.

• The Journal of Advanced Prosthodontics
• /
• 제6권5호
• /
• pp.372-378
• /
• 2014

PURPOSE. The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However, recently, due to the continuous rise in the price of gold, an interest towards materials to replace gold alloy is getting higher. This study compared the bond strength of porcelain to millingable palladium-silver (Pd-Ag) alloy, with that of 3 conventionally used metal-ceramic alloys. MATERIALS AND METHODS. Four types of metal-ceramic alloys, castable nonprecious nickel-chrome alloy, castable precious metal alloys containing 83% and 32% of gold, and millingable Pd-Ag alloy were used to make metal specimens (n=40). And porcelain was applied on the center area of metal specimen. Three-point bending test was performed with universal testing machine. The bond strength data were analyzed with a one-way ANOVA and post hoc Scheffe's tests (${\alpha}=.05$). RESULTS. The 3-point bending test showed the strongest ($40.42{\pm}5.72$ MPa) metal-ceramic bond in the nonprecious Ni-Cr alloy, followed by millingable Pd-Ag alloy ($37.71{\pm}2.46$ MPa), precious metal alloy containing 83% of gold ($35.89{\pm}1.93$ MPa), and precious metal alloy containing 32% of gold ($34.59{\pm}2.63$ MPa). Nonprecious Ni-Cr alloy and precious metal alloy containing 32% of gold showed significant difference (P<.05). CONCLUSION. The type of metal-ceramic alloys affects the bond strength of porcelain. Every metal-ceramic alloy used in this study showed clinically applicable bond strength with porcelain (25 MPa).

• 열처리공학회지
• /
• 제24권5호
• /
• pp.243-250
• /
• 2011

When alloys are vacuum-deposited on cooled substrates, super-rapidly cooled alloy films in the unequilibrium state can be obtained. As an application of this method, Ag-Cu, Ag-Ni and Ag-C alloys were successfully produced, and their mechanical properties with tempering temperature were investigated. The following results were obtained : (1) In case of Ag-Cu alloys, the solid solution was hardened by tempering at $150^{\circ}C$. The hardening is considered to occur when the solid solution begins to decompose into ${\alpha}$ and ${\beta}$ phases. The Knoop hardness number of a 40 at.%Ag-Cu alloy film deposited on a cooled glass substrate was 390 $kg/mm^2$. The as-deposited films were generally very hard but fractured under stresses below their elastic limits. (2) In case of Ag-Ni and Ag-C alloys, after the tempering of 4 at.%Ni-Ag alloy at $400^{\circ}C$ and of 1 and 2 at.%C-Ag alloys at $200^{\circ}C$, they were hardened by the precipitation of fine nickel and carbon particles. The linear relationship between proof stress vs. $(grain\;diameter)^{-l/2}$ for bulk silver polycrystals can be applied to vacuum-deposited films up to about 0.1 ${\mu}m$ grain diameter, but the proof stress of ultra-fine grained silver with grain diameters of less than 0.1 ${\mu}m$ was smaller than the value expected from the Petch's relation.