• 한국표면공학회지
• /
• 제21권4호
• /
• pp.168-175
• /
• 1988

The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion resistance and brightness in various conditions of electrodeposition were investigated, in the range of ultrasonic irradiation of 50,500 and 1,000kc/s respectively. The results obtained are as follows; 1. the ratio of nikel to zinc in the deposit increased according 시 the ammonium chloride concentration in irradiated baths. 2. The current efficiencies became also higer in the irradiated bath. 3. Ammonium ions in solution seem to retard formation of zinc hydroxide. 4. The corrsion resistance and brightness of the deposits are dependent upon nickel content of deposits which ranges 10-18%(wt)nickel in the irradiated baths and 11-15%(wt)in ninirradisted baths. 5. The corrosion resistance and brightnes of the deposited are appreciably better in the irradiated baths than in non-irradiated bath with the mole ratio of 3.4(NH+4/Ni+++Zn++).

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.191-198
• /
• 2020

Nickel oxide (NiO) nanoparticles were synthesized by a reaction of nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and sodium hydroxide (NaOH). The synthesized NiO nanoparticles were examined with X-ray diffraction, scanning electron microscopy, Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy. The NiO nanoparticles were used as the catalyst for the reduction of o- and m-nitroaniline to phenylenediamine. The reduction rate of m-nitroaniline was faster than that of o-nitroaniline. The reduction rate for both o- and m-nitroaniline increased as the reaction temperature increased. The rate of reduction for nitroaniline followed a pseudo first-order reaction rate law.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.147-158
• /
• 2017

This paper represents a set of experimental tests on remediation of nickel-contaminated kaolin by Electrokinetic method. For this purpose, we conducted unenhanced and EDTA-enhanced Electrokinetic tests in one, three, and five days of treatment. In unenhanced tests, we used deionized water as an electrolyte in the anode and the cathode compartments. In the EDTA-enhance tests, we used ethylenediaaminetetra acetic acid 0.1 Molar in the cathode and sodium hydroxide 0.1 Molar in the anode. The average nickel removal for unenhanced tests after three and five days of treatment was 19 and 23 percent, respectively. High buffer capacity of the soil is responsible for low removal efficiency in the unenhanced tests, which maintained pH close to the initial amount that restrained nickel as an adsorbed or precipitated forms. The average nickel removal for EDTA-unenhanced tests after three and five days of treatment was 22 and 12 percent, respectively. Lower ionic mobility of EDTA-Ni complex in comparison with $Ni^{+2}$, which is the main transportation mechanism for this complex, could be responsible for less removal efficiency in EDTA-enhanced test.

• 한국입자에어로졸학회지
• /
• 제10권4호
• /
• pp.177-182
• /
• 2014

In this study, nickel-coated aluminum (Ni/Al) powders were synthesized for the utilization of energetic applications. Oxide materials present at the surface of Al powders of $45{\mu}m$ in averaged size were removed by using sodium hydroxide(NaOH) solution which is used for controlling pH. Nickel material is coated into the surface of oxide-removed Al powders by electroless-plating process. The microstructure of fabricated Ni/Al powders shows that nickel layers with a few hundreds nm were very homogeneously formed onto the surface of Al powders. The oxidation behavior of Ni/Al exihibit somewhat faster oxidation rate than that of pure Al with surface oxidation. Also, the higher exothermic reaction was observed from the Ni/Al powders. From the result of this, nickel coating is very promising method to obtain highly reactive and safe Al powders for energetic applications.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.48-54
• /
• 2013

니켈, 코발트와 철의 혼합용액에 미량 함유되어 있는 구리 (399 ppm 구리, 208 ppm 철, 15.3 g/L 니켈, 2.1 g/L 코발트)를 분리, 제거를 위한 방법들을 검토하였다. 중화침전법의 경우 용액의 pH가 7.0 에서 구리는 철과 함께 전부 수산화물로 침전, 제거되었으나 니켈과 코발트의 일부도 함께 침전되었다. 황화침전법의 경우 1.25% 농도의 $Na_2S$를 구리의 2당량비 첨가하고 용액의 pH가 1.0인 경우 구리가 99.7% 제거 되었다. TP207 양이온 흡착제를 사용한 이온교환수지법은 평형 pH 2.0 에서 구리만이 선택적으로 흡착되었으며 탈착용액으로는 5% 황산이 적당하였다.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.236-243
• /
• 2017

A fixed-bed zinc/nickel redox flow battery (RFB) is designed and developed. The proposed cell has been established in the form of a fixed bed RFB. The zinc electrode is immersed in an aqueous NaOH solution (anolyte solution) and the nickel electrode is immersed in the catholyte solution which is a mixture of potassium ferrocyanide, potassium ferricyanide and sodium hydroxide as the supporting electrolyte. In the present work, the electrode area has been maximized to $1500cm^2$ to enforce an increase in the energy efficiency up to 77.02% at a current density $0.06mA/cm^2$ using a flow rate $35cm^3/s$, a concentration of the anolyte solution is $1.5mol\;L^{-1}$ NaOH and the catholyte solution is $1.5mol\;L^{-1}$ NaOH as a supporting electrolyte mixed with $0.2mol\;L^{-1}$ equimolar of potassium ferrocyanide and potassium ferricyanide. The outlined results from this study are described on the basis of battery performance with respect to the current density, velocity in different electrolytes conditions, energy efficiency, voltage efficiency and power of the battery.

• 한국분말재료학회지
• /
• 제28권6호
• /
• pp.497-501
• /
• 2021

Cobalt (Co) is mainly used to prepare cathode materials for lithium-ion batteries (LIBs) and binder metals for WC-Co hard metals. Developing an effective method for recovering Co from WC-Co waste sludge is of immense significance. In this study, Co is extracted from waste cemented carbide soft scrap via mechanochemical milling. The leaching ratio of Co reaches approximately 93%, and the leached solution, from which impurities except nickel are removed by pH titration, exhibits a purity of approximately 97%. The titrated aqueous Co salts are precipitated using oxalic acid and hydroxide precipitation, and the effects of the precipitating agent (oxalic acid and hydroxide) on the cobalt microstructure are investigated. It is confirmed that the type of Co compound and the crystal growth direction change according to the precipitation method, both of which affect the microstructure of the cobalt powders. This novel mechanochemical process is of significant importance for the recovery of Co from waste WC-Co hard metal. The recycled Co can be applied as a cemented carbide binder or a cathode material for lithium secondary batteries.

• 전기화학회지
• /
• 제9권2호
• /
• pp.95-99
• /
• 2006

마이크로전극을 사용하여 니켈-수소 전지의 전극 활물질인 수소저장합금$(MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3})$과 수산화니켈의 단일입자에 대하여 전기화학적 특성을 평가하였다. 즉 마이크로 전극을 활물질 입자 한 개 위에 전기적인 접촉을 이루도록 조정하고 전위 주사(Cyclic Voltammograms) 및 포텐셜 스텝(Potential Step)으로 실험을 실시하였다. 그 결과 수소저장 합금 입자의 경우 -0.9, -0.75, -0.65V 부근에서 3개의 산화 피크 및 -0.98V에서 수소발생 전위, 그리고 수산화니켈 입자의 경우 프로톤 산화 환원 반응(0.45V, 0.32V)과 산소 발생 반응 전위를 보다 명확하게 확인 할 수 있었다. 그리고 수소흡장합금 입자 내에서의 수소 흡장 및 방출 전 과정에 대해 수소 확산계수 $(D_{app})\;(10^{-9}\sim10^{-10}cm^2/s)$가 얻어졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.201.2-201.2
• /
• 2015

현대 디지털 사회에서 고효율 에너지와 파워소스에 관한 요구가 커짐에 따라 차세대 에너지 저장 소자에 대한 연구가 계속되고 있다. 그 중 리튬이온 배터리, 슈퍼커패시터, 그리고 연료 전지들이 우리의 일상생활에서 점점 더 중요하게 자리잡아가고 있는데 이런 다양한 에너지 저장소자 중 슈퍼커패시터가 많은 관심을 받고 있다. 이는 긴 수명, 빠른 충-방전 속도, 높은 에너지 밀도, 그리고 안전함 때문이다. 슈퍼커패시터는 에너지 저장 메커니즘에 따라 두 가지로 분류될 수 있는데 전기이중층 커패시터(EDLC)와 슈도커패시터(pseudocapacitor)로 나누어질 수 있다. 슈도커패시터는 active 물질과 전해질 이온 간의 전기화학적 반응으로 인해 EDLC보다 더 많은 에너지를 저장할 수 있다. 그러므로 지금까지 새로운 형태의 슈도용량성 물질을 만들기 위한 노력이 집중되고 있다. 본 연구에서는 전기화학적증착 방법을 통해 graphene-like ${\beta}$-nickel hydroxide (${\beta}-Ni(OH)_2$) 나노판 구조를 전도성 직물에 합성하였다. ${\beta}-Ni(OH)_2$ 슈도커패시터의 유연하고 효율적인 비용의 전극으로서 높은 비정전용량, 우수한 전기화학 가역성, 그리고 뛰어난 사이클 안정성을 보였다. 이런 쉬운 방법으로 유연한 전도성 직물에 합성된 metal hydroxide/oxide 나노구조는 웨어러블 에너지 저장소자와 변환소자 분야에 사용될 것으로 기대된다.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.131-136
• /
• 2014

Cathode materials and their precursors are prepared with transition metal solutions recycled from the the waste lithium-ion batteries containing NCM (nickel-cobalt-manganese) cathodes by a $H_2$ and C-reduction process. The recycled transition metal sulfate solutions are used in a co-precipitation process in a CSTR reactor to obtain the transition metal hydroxide. The NCM cathode materials (Ni:Mn:Co=5:3:2) are prepared from the transition metal hydroxide by calcining with lithium carbonate. X-ray diffraction and scanning electron microscopy analyses show that the cathode material has a layered structure and particle size of about 10 ${\mu}m$. The cathode materials also exhibited a capacity of about 160 mAh/g with a retention rate of 93~96% after 100 cycles.