• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.301-308
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProTaper Universal (PTU), ProTaper Next (PTN), and ProTaper Gold (PTG) and the effects of sterilization by autoclave on the cyclic fatigue life of nickel-titanium (NiTi) instruments. Materials and Methods: Eighty PTU, 80 PTN, and 80 PTG were included to the present study. Files were tested in a simulated canal. Each brand of the NiTi files were divided into 4 subgroups: group 1, as received condition; group 2, pre-sterilized instruments exposed to 10 times sterilization by autoclave; group 3, instruments tested were sterilized after being exposed to 25%, 50%, and 75% of the mean cycles to failure, then cycled fatigue test was performed; group 4, instruments exposed to the same experiment with group 3 without sterilization. The number of cycles to failure (NCF) was calculated. The data was statistically analyzed by using one-way analysis of variance and post hoc Tukey tests. Results: PTG showed significantly higher NCF than PTU and PTN in group 1 (p < 0.05). Sterilization significantly increased the NCF of PTN and PTG (p < 0.05) in group 2. PTN in group 3 had significantly higher cyclic fatigue resistance than PTN group 4 (p < 0.05). Also, significantly higher NCF was observed for PTG in group 2 than in groups 3 and 4 (p < 0.05). Conclusions: PTG instrument made of new gold alloy was more resistant to fatigue failure than PTN and PTU. Autoclaving increased the cyclic fatigue resistances of PTN and PTG.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.5
• /
• pp.224-228
• /
• 2014

Recently, the demands for separation/recovery of valuable metals such as nickel or tin from copper based alloys has been attracting much attention from the viewpoints of environmental protection and resource utilization. In this report, experimental results on concentration increasement of nickel and tin compared to the previous report are investigated. Ni is successfully separated by a organic solvent and reduced to the metal powder whose concentration is over 98 %. Sn is separated by a selective solution method and its concentration is increased to 97.5 % by three consecutive solution and reduction process. Crystal structure, surface morphology and microstructure of the separated samples are studied.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.36-43
• /
• 2018

In order to recycle waste nickel-cadmium batteries, cadmium was selectively removed by ion substitution reaction so that cadmium and nickel could be separated efficiently. The electrode powder obtained by crushing the electrode in the waste nickelcadmium battery was leached with sulfuric acid. The cadmium in the nickel-cadmium solution was precipitated with cadmium sulfide by the addition of sodium sulfide. Ion substitution experiments were carried out under various conditions. At the optimum condition with pH = -0.1 and $Na_2S/Cd=2.3$ at room temperature, the residual Cd in the solution was about 100 ppm, and most of it was precipitated with CdS.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.117-124
• /
• 2000

Objectives : It is the objective of this study to compare hepatotoxicity of nickel chloride and cadmium chloride with each other through IPRL(Isolated Perfused Rat Liver) method. Methods : Biochemical indicator of hepatic function such as AST(aspartate aminotransferase), ALT(alanine aminotransferase), LDH(lactate dehydrogenase) and perfusion flow rate were used as the indicator of hepatotoxicity. Oxygen consumption rate were used as vability indicator. $300({\pm}50)g$ - weighted rats were allocated randomly to each group($0{\mu}M,\;50{\mu}M,\;200{\mu}M\;NiCl_2\;and\;CdCl_2$ exposure) by 5, totally 25. After Krebs-Ringer bicarbonate butler solution flowed into the penal vein and passed the liver cell, it flowed out of vena cava. Liver was administered with each $NiCl_2\;and\;CdCl_2$ of each concentration and observed with buffer solution sampling time. Butler which got out of liver was sampled and then biochemical indicator of hepatotoxicity was measured. Results : AST, ALT, and LDH in buffer increased with sampling time much more in $CdCl_2$ exposure group than $NiCl_2$ exposure group in both 50 and $200{\mu}M$ and statistical significance w3s verified with 2-way repeated ANOVA. Viability was decreased more and more in all substances during passed time. Conclusions : It is inferred that $CdCl_2$ has stronger hepatotoxicity than $NiCl_2$. IPRL method would be used widely for acute hepatotoxicity when considerating the benefit of it.

• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.983-988
• /
• 2009

This study was performed to evaluate the toxicity and seek the control method of the wastewater in which nickel (Ni) was included into an industrial wastewater treatment plant. Nickel concentration of the wastewater, of which samples were taken every hour during 24hours, were various from 0.33 to 116.0 mg/L, with 24.0 mg/L of the average concentration. IC50 values against nitrosomonas and nitorbactor, a toxic level against bacteria which could inhibit 50% of nitrification bacteria in the wastewater, are 5.5 and 4.9 mg/L respectively. Nickel in this industrial wastewater can inhibit the 50% of nitrification bacteria even after diluting this wastewater 5 times. Also, this research, which reduced the nickel concentraion, forming nickel hydroxide compounds by increasing pH of the wastewater, shows that nickel concentraion can be obtained under 1.7 mg/L at pH 11 and 0.6 mg/L at pH 12. Consequently, the result of this study is that the nitrification efficiencies can be obtained from 83.8 to 99.4% with 97.6% of the average in the biological treatment after removing nickel in the wastewater by increasing the pH above 11~12, which is forming the nickel hydroxide compounds.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.114-120
• /
• 2002

A 1,989-bp genomic region encoding nickel resistance genes was isolated from Legionella pneumophila, a pathogen for legionellosis. From a sequencing and computer analysis, the region was found to harbor two structural genes, a nreB-like protein gene (1,149 bp) and a nreA-like protein gene (270 bp), in a row. Both genes exhibited a significant degree of similarity to the corresponding genes from Synechocystis sp. PCC6803 ($54\%$ amino acid sequence identity) and Achromobacter xylosoxidans 31A ($76\%$). The gene was successfully expressed in E. coli MG1655 and conferred a nickel resistance of up to 5 mM in an LB medium and 3 mM in a TMS medium including gluconate as the sole carbon source. E. coli harboring the nickel resistance gene also exhibited a substantial resistance to cobalt, yet no resistance to cadmium or zinc. Since the extracellular concentration of nickel remained constant during the whole period of cultivation, it was confirmed that the nickel resistance was provided by an efflux system like the $Ni^2＋$permease (nrsD) of Synechocystis sp. strain PCC6803. Since polyphosphate (poly-P) is known as a global regulator for gene expression as well as a potential virulence factor in E. coli, the nickel resistance of a ppk mutant of E. coli MG 1655 harboring the nickel resistance gene from L. pneumophila was compared with that of its parental strain. The nickel resistance was significantly attenuated by ppk inactivation, which was more pronounced in an LB medium than in a TMS medium.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.231-236
• /
• 2019

Ni hydroxides ($Ni(OH)_2$) are synthesized on Ni foam by varying the hexamethylenetetramine (HMT) concentration using an electrodeposition process for pseudocapacitor (PC) applications. In addition, the effects of HMT concentration on the $Ni(OH)_2$ structure and the electrochemical properties of the PCs are investigated. HMT is the source of amine-based $OH^-$ in the solution; thus, the growth rate and morphological structure of $Ni(OH)_2$ are influenced by HMT concentration. When $Ni(OH)_2$ is electrodeposited at a constant voltage mode of -0.85 V vs. Ag/AgCl, the cathodic current and the number of nucleations are significantly reduced with increasing concentration of HMT from 0 to 10 mM. Therefore, $Ni(OH)_2$ is sparsely formed on the Ni foam with increasing HMT concentration, showing a layered double-hydroxide structure. However, loosely packed $Ni(OH)_2$ grains that are spread on Ni foam maintain a much greater surface area for reaction and result in the effective utilization of the electrode material due to the steric hindrance effect. It is suggested that the $Ni(OH)_2$ electrodes with HMT concentration of 7.5 mM have the maximum specific capacitance (1023 F/g), which is attributed to the facile electrolyte penetration and fast proton exchange via optimized surface areas.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.98-103
• /
• 2011

We prepared a counter electrode by electroplating Ni as underlayer and Pt as plating layer on the FTO glass to increase the efficiency of dye-sensitized solar cell (DSSC). We found an excellent adhesion between Ni underlayer and FTO glass when Ni underlayer was electroplated at $10mA/cm^2$ for 2 min on FTO glass. We observed Ni and Pt metal diffraction peaks by XRD analysis when Ni underlayer was electroplated at $10mA/cm^2$ for 2 min, and Pt layer was electroplated at $5mA/cm^2$ for 1 min on the Ni underlayer. Photovoltaic performance and impedance analysis of DSSCs fabricated with this counter electrode shows the highest efficiency of 5.6% and the lowest resistance of 75 ohm.

• Journal of Hydrogen and New Energy
• /
• v.5 no.2
• /
• pp.65-71
• /
• 1994

Electrochemical and thermodynamic properties of $MmNi_5$ and the related alloys for nickel-metal hydride battery(Ni-MH) were studied in terms of the equilibrium hydrogen pressure. $MmNi_5$ alloy with high equilibrium hydrogen pressure(10~20atm at room temperature), which is usually difficult to charge, was substituted for Al in part. Partial substitution of Al made not only the equilibrium pressure to be reduced remarkably, but also the enthalpy change depending on the formation of metal hydride to be agreed to the value in gas phase reaction and electrochemical reaction. Besides the composition of Al which can be given the maximum discharge capacity was turned out to be between the 0.5~1.0 atoms of Al.