• Journal of Magnetics
• /
• 제10권1호
• /
• pp.5-9
• /
• 2005

Nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ is fabricated by a sol-gel method. The magnetic and structural properties of powders were investigated with XRD, SEM, Mossbauer spectroscopy, and VSM. $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powders annealed at $300{^{\circ}C}$ have a spinel structure and behaved superparamagnetically. The estimated size of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 10 nm. The hyperfine fields at 13 K for the A and B patterns are found to be 533 and 507 kOe, respectively. The ZFC curves are rounded at the blocking temperature ($T_B$)and show a paramagnetic-like behavior above $T_B$. $T_B$ of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 250 K. Nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at 400 and $500{^{\circ}C}$ have a typical spinel structure and is ferrimagnetic in nature. The isomer shifts indicate that the iron ions were ferric at the tetrahedral (A) and the octahedral (B). The saturation magnetization of nanoparticles $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at 400 and $500{^{\circ}C}$ are 40 and 43 emu/g, respectively. The magnetic anisotropy constant of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ annealed at $300{^{\circ}C}$ were calculated to be 1.6 ${\times}$ $10^6$ ergs/$cm^3$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2006년도 제30회 학술논문발표회 초록집
• /
• pp.204-204
• /
• 2006

• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.231-237
• /
• 2013

Thermodynamic modeling of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite system has been adopted as a rational approach to establish routes to better synthesis conditions for pure phase $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite. Quantitative analysis of the different reaction equilibria involved in the precipitation of $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ from aqueous solutions has been used to determine the optimum synthesis conditions. The spinel ferrites, such as magnetite and substitutes for magnetite, with the general formula $MFe_2O_4$, where M= $Fe^{2+}$, $Co^{2+}$, and $Ni^{2+}$ are prepared by coprecipitation of $Fe^{3+}$ and $M^{2+}$ ions with a stoichiometry of $M^{2+}/Fe^{3+}$= 0.5. The average particle size of the as synthesized $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$, measured by transmission electron microscopy (TEM), is 14.2 nm, with a standard deviation of 3.5 nm the size when calculated using X-ray diffraction (XRD) is 16 nm. When $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite is annealed at elevated temperature, larger grains are formed by the necking and mass transport between the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite nanoparticles. Thus, the grain sizes of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ gradually increase as heat treatment temperature increases. Based on the results of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC) analysis, it is found that the hydroxyl groups on the surface of the as synthesized ferrite nanoparticles finally decompose to $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ crystal with heat treatment. The results of XRD and TEM confirmed the nanoscale dimensions and spinel structure of the samples.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.389-402
• /
• 1999

Single crystal of Li2Cu1-xMxO4 (M=Ni, Zn) are promising as a substrate to realize superconducting electronic devices. The distribution coefficients of Ni and Zn to the Cu site in La2CuO4 (LCO) were estimated by the zone melting technique to grow high quality single crystals of La2Cu1-xMxO4(M=Ni, Zn). The distribution coefficient value of Ni was estimated to be 4.2 and that of Zn was estimated to be 0.66, respectively. Suitable solvent compositions were determined using these values to grow single crystals by he traveling floating zone (TSFZ) method. Single crystal of LCO, La2Cu1-xMxO4(M=Ni(x=0.01, 0.02, 0.03, 0.04), Zn(x=0.01, 0.02, 0.03) of high homogeneity were grown. The behaviors of the magnetization of these as-grown crystals do not indicate superconductivity except LCO. Ni or Zn substitution can make LCO non superconductor. This fact suggest that single crystals substituted by Ni or Zn are useful as substrate crystals.

• 청정기술
• /
• 제23권1호
• /
• pp.27-33
• /
• 2017

본 연구에서는 중금속 7종(Cu, Cd, Cr, As(III), As(V), Zn, Ni) 및 나노입자 5종(CuO, ZnO, NiO, $TiO_2$, $Fe_2O_3$)에 대한 독성을 수계 대표 생물종인 녹조류 Chlorella vulgaris를 이용한 생물검정법으로 평가하였다. 조류에 미치는 영향은 흡광도, 클로로필 및 개체수 측정에 대한 결과를 통합하여 평가하였다. 중금속의 통합결과독성($TEC_{50}$) 순서는 Cr ($0.7mgL^{-1}$) > Cu ($1.7mgL^{-1}$) > Cd ($3.2mgL^{-1}$) > Zn ($3.9mgL^{-1}$) > Ni ($13.2mgL^{-1}$) > As(III) ($17.8mgL^{-1}$) ${\gg}$ As(V) (> $1000mgL^{-1}$)로 나타났다. 중금속은 측정종말점에 따라 일부 상이한 민감도와 독성이 조사되었다. 나노입자의 독성($TEC_{50}$) 순서는 ZnO ($2.4mgL^{-1}$) > NiO ($21.1mgL^{-1}$) > CuO ($36.6mgL^{-1}$) > $TiO_2$ ($62.5mgL^{-1}$) > $Fe_2O_3$ ($82.7mgL^{-1}$)로 나타났다. 나노입자는 측정종말점간에 비슷한 민감도와 독성을 보였다. 따라서 오염물의 독성을 평가하기 위해서 단일 방법에 의한 결과보다는 다양한 측정종말점의 통합결과에 근거한 접근이 적절할 것이다.

• 한국자기학회지
• /
• 제5권1호
• /
• pp.21-26
• /
• 1995

비화학양론 조성의 니켈-아연 페라이트 소결체 시편에서 투자율과 유전율을 체계적으로 변화 시킴에 따라 전파흡수특성에 미치는 영향을 조사하였다. ${(Ni_{0.5}Zn_{0.5}O)}_{1-x}(Fe_{2}O_{3})_{1+x}$ 시편은 일반적인 세라믹 제조공정에 의해 제조 하였다. 본 연구에서는 니켈-아연 페 라이트에서 ${\alpha}-Fe_{2}O_{3}$ 함량을 변화시킴에 따라 복수투자율과 복소유전율의 조절 방안 을 조사하였다. 철과잉량의 효과는 유전상수 증가였으며 철결핍량의 효과는 ${\mu}_{r}"$ 감소이었다. 니켈-아연 페라이트에서 ${\alpha}-Fe_{2}O_{3}$ 함량 변화에 따라 정합주파수와 정합두께 조절이 가능함을 제시하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 추계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.18-18
• /
• 1998

• 한국재료학회지
• /
• 제14권5호
• /
• pp.338-342
• /
• 2004

Ni-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal nitrates, Fe($NO_3$)$_3$ㆍ$9H_2$O, Ni($NO_3$)$_2$ㆍ$6H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O to make a high permeability material. The composition of the ferrite powder was $Fe_2$$O_3$ 52 mol%, NiO 14.4 mol%, ZnO 33.6 mol%. Ni-Zn ferrite powder was compounded by precipitating metal nitrates with NaOH in vessel at the synthetic temperature of $90^{\circ}C$ for 8 hours. Calcination temperature and sintering temperature were $700^{\circ}C$ and $1150^{\circ}C$～$1250^{\circ}C$, respectively, for 2 hours. And the other ferrite powder was also prepared by the wet ball milling that was to be mixed the metal oxides as same as the above chemical composition. We studied the properties of the powder and the electromagnetic characteristics of the sintered cores obtained from there two different processes. Wet direct process produced smaller particle size with narrower distribution of the size and more purified ferrite whose sintered cores had high permeability and high magnetization.

• 한국결정학회지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2003

석유화학 공정 중 styrene monomer제조공정에서 발생되는 산화철 폐촉매는 산업 폐기물로서 전량 매립되고 있는데, 이를 출발원료로 사용하여 NiZn-페라이트를 합성하였고, 그 자기적 특성을 조사하였다. 출발 원료인 산화철 폐촉매는 산 처리와 CeO₂ 분리과정을 거쳤으며, 이렇게 정제된 산화철 폐촉매에 NiO및 ZnO를 혼합하여 900℃에서 하소하여 스핀넬형 페라이트를 합성하고 1325℃에서 5시간 소결하였다. Ni/sub x/Zn/sub 1-x/Fe₂O₄(x=0.36, 0.50, 0.66)과 (Ni/sub 0.5/Zn/sub 0.5/)/sub 1-y/Fe/sub 2+y/O₄(y =-0.02, 0, 0.02)의 조성에 대하여 초투자율을 측정하였고, S-parameter를 측정하여 반사 감쇄량을 계산하였다.

• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1119-1123
• /
• 2002

Nanostructured spinel NiZn ferrites were prepared by the sol-gel method from metal nitrate raw materials. Analyses by X-ray diffraction and scanning electron microscopy showed the average particle size of NiZn ferrite was under 50 nm. The single phase of NiZn ferrites was obtained by firing at 250${\circ}C$, resulting in nanoparticles exhibiting normal ferrimagnetic behavior. The nanostructured $Ni_{1-X}Zn_XFe_2O_4$ (x=0.0∼1.0) were found to have the cubic spinel structure of which the lattice constants ${\alpha}_2$ increases linearly from 8.339 to 8.427 ${\AA}$ with increasing Zn content x, following Vegard's law, approximately. The saturation magnetization $M_s$ was 48 emu/g for x=0.4 and decreased to 8.0 emu/g for higher Zn contents suggesting the typical ferrimagnetism in mixed spinel ferrites. Pure NiZn ferrite phase substituted by Cu was observed before using the additive but hematite phase was partially appeared at $Ni_{0.2}Zn_{0.2}Cu_{0.6}Fe_2O_4$. On the other hand, the hematite phase in this NiZn Cu ferrite was disappeared after using the additive of acethyl aceton with small amount. The saturation magnetization Ms of $Ni_{0.2}Zn_{0.8-y}Cu_yFe_2O_4$(y=0.2∼0.6) as measured was about 51 emu/g at 77K and 19 emu/g at room temperature, respectively.