• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.359-367
• /
• 2023

The localized corrosion resistance of the Ni-based Inconel 718 alloy after solution heat treatment was evaluated using electrochemical techniques in a solution of 25 wt% NaCl and 0.5 wt% acetic acid. Solution heat treatment at 1050 ℃ for 2.5 hours resulted in an increased average grain diameter. Both Ti carbides (10 ㎛ diameter) and Nb-Mo carbides (1 - 9 ㎛ diameter) were distributed throughout the material. Despite heat treatment, the shape and composition of these carbides remained consistent. An increase in solution temperature led to a decrease in pitting potential value. However, the pitting potential value of solution heat-treated Inconel 718 was consistently higher than that of as-received Inconel 718 at all tested temperatures. Localized corrosion initiation occurred at 0.4 V_SSE in a temperature environment of 80 ℃ for both as-received and solution heat-treated Inconel 718 alloys. X-ray photoelectron spectroscopic analysis indicated that the composition of the passive film formed on specimen surfaces remained largely unchanged after solution heat treatment, with O1s, Cr2p_3/2, Fe2p_3/2, and Ni2p_3/2 present. The difference in localized corrosion resistance between as-received and solution heat-treated Inconel 718 alloys was attributable to microstructural changes induced by the heat treatment process.

• 한국환경농학회지
• /
• 제17권4호
• /
• pp.291-295
• /
• 1998

공업단지에서 배출되는 대기오염물질이 확산작용에 의해 농업지대에 내리는 강우에 영향을 미치는지를 조사하기 위하여 1997년 5월 1일부터 1998년 4월 30일까지 비오염지로 예상되는 전라북도 진안군 마령면 수도작 농업지대에 내리는 강우중 화학성분의 함량변화와 천연공급량을 조사한 결과는 다음과 같다. 강우pH는 $6.44{\sim}7.24$, EC는 $14.23{\sim}30.67{\mu}S/cm$의 범위를 나타내었다. 전질소의 함량은 $1.43{\sim}10.14㎎/L$, 암모니아태질소는 $0.57{\sim}4.39㎎/L$, 질산태질소는 $0.18{\sim}1.69㎎/L$의 범위를 나타내었다. 전인산은 $0.015{\sim}0.087㎎/L$의 범위를 나타내었으며, 가용성인산은 검출되지 않았다. 부유물질은 $3.6{\sim}15.3㎎/L$, $Ca^{++}$는 $0.37{\sim}1.66㎎/L$, $Mg^{++}$는 $0.17{\sim}0.52㎎/L$, $Na^+$는 $0.015{\sim}0.087㎎/L$ 그리고 $K^+$ 는 $0.17{\sim}0.58㎎/L$의 범위를 나타내었다. 조사대상 중금속중 중금속중 Cd, Pb, Ni, Cr은 검출되지 않았으며, Zn의 경우 $0.009{\sim}0.098㎎/L$, Cu의 경우 불검출${\sim}0.019㎎/L$의 범위를 나타내었는데 그 함량이 아주 낮은 수준이었다. 음이온성분 가운데 $Cl^-$는 $1.02{\sim}7.24㎎/L$, $SO_4^{2-}$는 $3.73{\sim}14.47㎎/L$, 의 범위를 나타내었다. 각종 화학성분의 천연공급량은 전질소 39.48㎏/㏊/yr, 암모니아태질소 21.82㎏/㏊/yr, 질산태질소 6.90㎏/㏊/yr, 전인산 0.68㎏/㏊/yr로 공급되었다. 양이온성분의 공급량은 각각 $Ca^{++}$ 4.46㎏/㏊/yr, $Mg^{++}$ 5.00㎏/㏊/yr, $Na^+$ 7.26㎏/㏊/yr, $K^+$ 5.46㎏/㏊/yr로 나타났다. 중금속물질 가운데 Pb, Cd, Ni와 Cr은 검출되지 않았으며, Cu와 Zn의 공급량은 각각 0.024㎏/㏊/yr, 0.44㎏/㏊/yr로 나타났다. 음이온성분중 $Cl^-$는 31.16㎏/㏊/yr, $SO_4^{2-}$ 98.76㎏/㏊/yr로 나타났다.

• 한국식품영양과학회지
• /
• 제34권9호
• /
• pp.1464-1470
• /
• 2005

우리나라 연안에서 수집한 김(33점), 미역(88점), 다시마(12점), 파래(43점)등 총 176점의 주요 식용 해조류에 대한 미량금속의 함량을 조사한 결과, 아연, 망간, 구리 순으로 우리 체내에서 없어서는 안되는 필수성분들의 함량이 높았으며, 다음으로 크롬, 니켈, 납, 카드뮴, 수은 순이었다. 김에서는 카드뮴과 아연이, 그리고 파래에서는 크롬, 니켈 및 납이 가장 높게 검출되었고, 다시마에서는 수은이 가장 높게 검출되는 경향을 나타내었다. 카드뮴과 아연의 농축계수는 김에서 각각 약 12,000 및 14,000으로 가장 높게 나타났으며 크롬과 납은 파래 에서 각각 약 23,000 및 약 2,500으로 가장 많이 농축되었다. 또한, 구리는 김과 파래에서 약 5,500으로 많이 농축되었다. 다시마에서는 망간과 납 사이에 다른 식용해조류와는 달리 특이적으로 높은 상관관계를 나타내었으며, 금속간의 상관관계도 같은 갈조류인 미역, 그리고 녹조류인 파래와 전혀 다른 경향을 나타내었다. 김, 미역, 파래에서는 니첼-망간, 니켈-크롬 및 망간-크롬간에는 높은 상관관계를 나타내어 다른 금속들과 뚜렷한 차이를 보였으며, 특히 크롬-니켈은 높은 상관관계를 나타내었다. 우리나라 국민의 식용해조류를 통한 수은의 1일 섭취량은 평균 $0.03{\mu}g$이었으며, 이는 PTWI($5{\mu}g/kg$ body weight/week)의 $0.07\%$ 수준이었다. 또한, 카드뮴의 1일 섭취량은 평균 $2.15{\mu}g$이었으며, 이는 PTWI(7${\mu}g/kg$ body weight/week)의 $3.57\%$ 수준이었다. 납의 1일 섭취량은 평균 $2.65{\mu}g$이었으며, 이는 PTWI($25{\mu}g/kg$ body weight/week)의 $1.20\%$ 수준이었다. 따라서 우리국민이 해조류를 통해 일주일에 섭취하는 수은, 납, 카드뮴등의 함량은 PTWI의 $0.07{\~}3.57\%$에 해당되며, 유해중금속 함량은 매우 안전한 수준인 것으로 판단된다. 우리나라 국민은 해조류 통한 구리, 아연, 망간, 크롬의 섭취량은 영양소 기준치의 각각 1.35, 0.89, 4.28, $9.18\%$ 수준이었다.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.620-639
• /
• 1999

Indirect composite resins are used as an popular effective esthetic material in prosthetic dentistry, often with metallic substructure that provides support for restorations. Recently, new indirect composite resins as a substitute of ceramic have been developed. These resins provide good esthetics, with a wide range of hue and chroma. And the flexural strength of those is in the range of 120-150MPa, Which is higher than that of feldspathic Ceramic, and similar th that of Dicor. Although it has many merits, one of the major clinical problems of composite resins is the bond failure between metal and resin due to insufficient interfacial bond strength. The purpose of this study was to evaluate shear bond strength of the reinforced indirect composite resin to dental alloys. Three different composite resin systems($Artglass^{(R)},\;Sculpture^{(R)},\;Targis^{(R)}$) as test groups and ceramic($VMK\;68^{(R)}$) as control group were bonded to Ni-Cr-Be alloy($Rexillium\;III^{(R)}$) and gold alloy(Deva 4). All specimens were stored at $^37{\circ}C$ distilled water for 24 hours and the half of specimens were thermocycled 2000 times at temperature from $5^{\circ}C\;to\;60^{\circ}C$. The shear bond strengths of reinforced indirect composite resins to dental alloys were measured by using the universal testing machine, and modes of debonding were observed by stereoscope and scanning electron microscope. The results were as follows: 1 The shear bond strengths of reinforced indirect composite resins to dental alloys were approximately half those of ceramic to dental alloys(P<0.01). 2. There was no significant difference between the shear bond strength of several reinforced indirect composite resins to metal. 3. Alloy type did not affect on the shear bond strengths of resin to metal, but the shear bond strengths of ceramic to gold alloys were higher than those of ceramic to Ni-Cr alloys(P<0.05). 4. The shear bond strengths of Artglass and Targil to gold alloys were significantly decreased after thermocycling treatment(P<0.01). 5. Sculpture showed cohesive, adhesive, and mixed failure modes, but Artglass and Targis showed adhesive or mixed failures. And ceramic showed cohesive and mixed failures.

• 한국축산시설환경학회지
• /
• 제18권3호
• /
• pp.201-206
• /
• 2012

말의 성장단계별 분뇨의 시료를 채취하여 비료성분 및 오염물질 성분을 채취하여 분석하여 본 결과 다음과 같았다. 1. 말의 분뇨의 수분함량은 각각 76.1%, 96.0%로 조사되었다. 2. 또한 말의 분 중 유기물함량은 21.3%로 조사되었으며, 뇨는 약 2.0%로 조사되었다. 3. 또한 말의 분뇨 중 비료성분인 T-N, T-P, T-K의 성분이 각각 0.18%, 0.10% 및 0.23% 이며, 뇨는 각각 2.88%, 0.0015% 및 0.84%로 조사되었다. 4. 말 분뇨의 오염물질을 조사한 결과, 말의 분뇨의 pH는 각각 7.10, 8.48이며, BOD는 분이 26,906.2 $mg/{\ell}$, 뇨는 14,298.9 $mg/{\ell}$, COD는 분이 36,642.3 $mg/{\ell}$, 뇨는 7,484.3 $mg/{\ell}$, SS (Suspended Solid, 부유물질)은 분에서 89,375.0 $mg/{\ell}$, 뇨에서 6,987.0 $mg/{\ell}$로 조사되었다. 5. 말의 분과 뇨의 중금속함량 중 Cr은 각각 2.65 mg/kg, 1.52 mg/kg으로 조사되었으며, Cu 성분도 7.05 mg/kg, 1.62 mg/kg 으로 조사된 반면에 Ni 성분은 말의 분뇨에서 각각 1.24 mg/kg, 0.0 mg/kg으로 조사되었다. 6. 따라서 말의 분뇨는 퇴비원료물로 사용이 가능한 것으로 조사 분석되었으며, 향후 승마사업의 급격한 발전으로 말의 분뇨 발생량이 증가될 것으로 전망되며, 이를 적정 처리하기 위해서는 퇴비화 방법으로 자원화가 가능 할 것으로 조사되었다.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.122-130
• /
• 2017

The main purpose of the study was to clarify the properties of individual particles collected at each behavior space of a factory worker. The samplings of size-segregated ($PM_{2.1-1.1}$ and $PM_{4.7-3.3}$) indoor particles were conducted at three different behavior spaces of a factory worker who is engaged in an auto parts manufacturing plant (i.e., his home, his work place in factory, and his favorite restaurant). Elemental specification (i.e., relative elemental content and distribution in and/or on individual particles) was performed by a micro-PIXE system. Every element detected from the coarse particulate matters of home was classified into three groups, i.e., a group of high net-counts (Na, Al, and Si), a group of intermediate net-counts (Mg, S, Cl, K, and Ca), and a group of minor trace elements (P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pb). The results of EF for $PM_{4.7-3.3}$ in home indicated that several heavy metals were generated from the sources within the house itself. An exceptional feature shown in the individual particles in workplace is that Cr, Mn, and Co were clearly detected in both fine and coarse particles. Cluster analysis suggested that the individual coarse particles ($PM_{4.7-3.3}$) collected at the indoor of factory were chemically heterogeneous and they modified with sea-salt, mineral, and artificially derived elements. The principal components in individual coarse particles collected at restaurant were sea-salt and mineral without mixing with harmful trace elements like chromium and manganese. Compared to the indoor fine particles of home and restaurant, many elements, especially, Cl, Na, Cr, Mn, Pb, and Zn showed overwhelmingly high net-counts in those of factory.

• 한국환경보건학회지
• /
• 제36권4호
• /
• pp.294-305
• /
• 2010

This study estimated the health risk of heavy metals in particulate matter $(PM)_{2.5}$ in a Gwangyang industrial complex. The $PM_{2.5}$ containing heavy metal was collected from January to November, 2008 using a denuder air sampler and by IC (Ion Chromatograph). The risk assessment was performed in a four-step process; hazard identification, exposure assessment, dose-response assessment and risk characterization. In the hazard identification process, $Cr^{6+}$, Ni, As, and Pb were categorized as human carcinogens and probable human carcinogens, while Ti, Mn, Se, P, $Cr^{3+}$, Cu, and Zn were not classified as human carcinogens. It was found that the excess cancer risk by Central Tendency Exposure (CTE) of $Cr^{6+}$ and As in $PM_{2.5}$ was > $10^{-6}$, and the total excess cancer risk posed by carcinogen heavy metals in $PM_{2.5}$ was > $10^{-6}$. It was also determined that the total hazard index by CTE of non-carcinogen heavy metals in $PM_{2.5}$ was <1. Taken together, these results indicate a high cancer risk associated whit inhalation of heavy metal-containing$PM_{2.5}$ in industrial areas.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• 한국환경과학회지
• /
• 제24권10호
• /
• pp.1253-1264
• /
• 2015

This study assessed the fertilizing value of struvite deposit recovered from swine wastewater in cultivating Chinese cabbage. Struvite deposit was compared with commercial fertilizers: complex, organic and compost to evaluate the fertilizing effect of struvite deposit. Laboratory pot test obviously presented that the struvite deposit more facilitated the growth of Chinese cabbage than organic and compost fertilizers even though complex fertilizer was the most effective in growing Chinese cabbage. It was revealed that the growth rate of Chinese cabbage was simultaneously controlled by phosphorus (P) and potassium (K). Also, the nutrients such as nitrogen (N), P, K, calcium (Ca) and magnesium (Mg) were abundantly observed in the vegetable tissue of struvite pot. Specifically, P was the most abundant component in the vegetable tissue of struvite pot. Meanwhile, the utilization of struvite as a fertilizer led to the lower accumulation of chromium ($Cr^{6+}$) than other pots, except for compost fertilizer pots, and no detection of cadmium (Cd), arsenic (As) and nickel (Ni) in the Chinese cabbage. The experimental results proved that the optimum struvite dosage for the cultivation of Chinese cabbage was 2.0 g struvite/kg soil. On the basis of these findings, it was concluded that the struvite deposits recovered from swine wastewater were effective as a multi-nutrient fertilizer for Chinese cabbage cultivation.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.454-465
• /
• 2022

The objective of this study was to determine effects of temperatures and pH of sodium chloride solution with MgCl₂ ions on corrosion resistance of duplex stainless-steel X2CrNiMoN22-5-3 (DSS) and Ti 6Al 2Nb1Ta1Mo (Ti). Effects of sodium chloride concentration on corrosion resistance were also studied. Corrosion behavior and pitting morphology of duplex stainless steel (DSS) and Ti alloys were evaluated through potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). It was found that a decrease in pH significantly reduced the corrosion resistance of both alloys. Changes in chloride concentration and temperature had more substantial impact on corrosion behavior of DSS than on Ti alloys. Pitting corrosion was formed on DSS samples under all conditions, whereas crevice corrosion was developed on Ti samples with the presence of magnesium chloride at 90 ℃. In conclusion, magnesium chloride ions in an exceedingly strong acidity solution appear to interact with re-passivation process at the surface of these alloys and influence the resulting surface topography.