• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.606-615
• /
• 2010

This study aims to identify the characteristics of soil in Mongolia, one of the major Asian dust sources that influence the Korean Peninsula. Soil particle size was analyzed and the result shows that sand (57.5~97.3%) was identified prominently in most regions, followed by silt (2.5~34.7%) and clay (0.0~7.8%). Soil pH of the covered regions were in the range 7.1~10.1, either weak alkaline or strong alkaline. Analysis of ion species in the soil samples exhibited that $Na^+$ ($91.9\;mg\;kg^{-1}$), $Cl^-$ ($65.9\;mg\;kg^{-1}$), and $Ca^{2+}$ ($53.5\;mg\;kg^{-1}$) were detected more in the soil than other species such as ${SO_4}^{2-}$ ($19.2\;mg\;kg^{-1}$), ${NO_3}^-$ ($46.6\;mg\;kg^{-1}$), ${NH_4}^+$ ($3.9\;mg\;kg^{-1}$), $K^+$ ($22.0\;mg\;kg^{-1}$), and $Mg^{2+}$ ($10.2\;mg\;kg^{-1}$). As for heavy metal content in the soil, concentrations of soil-borne metals including Fe, Al, Ca, Mg, and K tended to be high, while metals that come from manmade sources Pb, Cd, Cr, V, and Ni were remarkably low. The concentration of organic carbon (OC) was relatively high at $15.9\;{\mu}g\;mg^{-1}$, while elemental carbon (EC), directly released in the process of fossil fuel combustion, was not detected at all or found in very small amounts. The result indicates that pollution from manmade sources scarcely occurred. The analysis results from this study may contribute to improving modeling accuracy by providing input data for Asian dust prediction models, and be used as base data for determining the process of physiochemical transformation of Asian dust during long-range transport.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.632-639
• /
• 1990

The biological activities of twelve different kinds of enzymatic browning reaction products(EBRP), which resulted from the reactants four kinds of polyphenols with polyphenol oxidase extracted from Ligularia fischeri, pimpinella brachycarpa and Aster scaber of edible mountain herbs. All of twelve samples did not show any mutagenic effect in the spore rec-assay, Ames mutagenicity test and DNA breaking test. However metal ions such as $Cu^{2+},\;Fe^{2+}$, and $Ni^{2+}$ were increased the DNA breakage in rec-assay. The EBRPs inhibited the mutagenicities induced by $benzo({\alpha})pyrene (B({\alpha})P)$, 3-amino-1,4-dimethyl-5H-pyrido-[4,3-b]indole(Trp-P-1) and 2-aminofluorene(2-AF) in Salmonella/microsome assay system with S-9 mix. In effects of EBRPs on the DNA repair system, the activity of EcoRI was highly inhibited and that of $T_{4}$ DNA ligase was inactivated by addition of EBRPs. The results of transformation ratio of plasmid pGA658 into E. coli HB 101 was significantly decreased by the reaction products of S. brachycarpa polyphenoloxidase (PPO). When UV light was exposed to the mixture of DNA and EBRP before the thanformation, the reaction products from L. fischeri PPO with pyrogallol, catechol and hydroxyhydroquinone stimulated transformation ratio.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.271-277
• /
• 2014

To overcome the limitations of the solid oxide fuel cells (SOFCs) due to the high temperature operation, there has been increasing interest in proton conducting fuel cells (PCFCs) for reduction of the operating temperature to the intermediate temperature range. In present work, the perovskite $BaCe_{0.85-x}Zr_xY_{0.15}O_{3-\delta}$ (BCZY, x = 0.1, 0.3, 0.5, and 0.7) were synthesized via solid state reaction (SSR) and adopted as an electrolyte materials for PCFCs. Powder characteristics were examined using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunauer, Emmett and Teller (BET) surface area analysis. Single phase BCZY were obtained in all compositions, and chemical stability was improved with increasing Zr content. Anode-supported cell with $Ni-BaCe_{0.55}Z_{0.3}Y_{0.15}O_{3-\delta}$ (BCZY3) anode, BCZY3 electrolyte and BCZY3-$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-\delta}$ (BSCF) composite cathode was fabricated and electrochemically characterized. Open-circuit voltage (OCV) was 1.05 V, and peak power density of 370 ($mW/cm^2$) was achieved at $650^{\circ}C$.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.37-55
• /
• 1997

최근 선진국가들에서는 전자파 장애 증후군에 관심이 집중되고 있는데, 전자파에 장기 노출 되는 인구에서 뇌암이나 유방암, 백혈병 등의 발생률이 높다는 보고(Kolmodin-Hedman 등, 1988 ; Demers등, 1991)가 있어서 전자제품의 생산업체는 물론이고 사용자에 대해서도 불안한 관심사가 되 어 있다. 전자파가 생체에 미치는 영향은 열적 효과와 비열적 효과에 의한 것으로 구분된다. Microwave는 약 300MHz에서 300GHz 사이(파장 1m에서 1mm사이)의 주파수를 가지는 전자파로서 이온의 운동이나 쌍극자분자(dipole molecule)들을 진동시키므로서 조직에 열이 발생한다. 열이 과도하게 발생하면 세포 단백질이 응고하게 되는 등 일반적으로 생각할 수 있는 고열로 인한 여러 가지 유해환경이 조직 에 조성될 수 있다. 실제로 고전압의 전자파에 노출된 안구의 수정체에 백내장 등의 병변이 발생한 것 으로 보고된 바 있다(Adey,1981). 일반적으로 전자파의 생체에 대한 작용으로는 이렇듯 조직에 흡수 되는 전자파의 에너지에 의한 열작용이 지배적인 것으로 생각되어 왔다. 그러나 초저주파역대(Extre- mely low frequency, EMF)의 변조 및 펄스파 등의 영향에 관해서도 조직의 온도상승으로는 설명할 수 없는 현상이 보고된 바 있다. 이러한 비열적 효과가 신경계에 끼치는 영향에 대해서는 혈액뇌관문 의 투과성 변화(Oscar와 Hawkins, 1977), 뇌종양 발생, 칼슘대사 이상 및 신경전달물질에 대한 영향 등이 주장(Anderson, 1993)되고 있으나 아직 그 분명한 기전이 밝혀져 있지 않은 상태이다. 또한 그 영향의 평가에 서도 일정한 기준이나 지표가 정해지지 않은 실정이다. 그러므로 신경계에 대한 대체적인 소개와 더불어 전자기파의 영향에 대한 이제까지의 보고를 종합 하고 향후 연구의 방향을 소개하고자 한다.> 이온이 공동 첨가제로 더 적합하다.u(30 .angs. )/CoFe(35 .angs. )/NiO(800 .angs. ) 구조를 갖는 spin-valve 박막은 극대 MR비 6.3%, 유효자기장감응도 약 0.5(%/Oe)를 보여 spin-valve head 재료로 적합함을 알 수 있었다.다.다.다.는 각각 148 meV .angs. $^{2}$, 103.8 meV .angs. $^{2}$와 1.77 * $10^{-6}$ erg/cm, 0.67 * $10^{-6}$ erg/cm 였다.다.자 노인들을 영주권자와 귀화 시민권자의 구분없이 하나의 집단으로 간주하고 분석해 왔던 것을 볼 때, 앞으로의 연구는 이론적으로나 방법론적으로 시민권의 유무가 주거형태에 끼치는 영향도 함께 고려해야 할 것이다.에 나타난 인도의 영향은 여성복식과 남성복식에 있어서 서로 유사점과 차이점이 보이는데, 인도의 영향이 여성복식에 있어서 그 빈도가 더 높고, 종류가 더 다양함을 볼 수 있다. 여성복식에 있어서는 12가지의 다양한 인도복식스타일이 나타났으며, 그중 가장 많이 보이는 스타일은 Indian Shirt/Blouse/Smock/ Dress이며, 그 뒤를 이어 Madras, Indian lowery등을 볼 수 있다. 남성복식애 나타난 7가지의 스타일 중에는 Madras가 가장 빈도가 높으며 그외의 스타일들은 그 빈도가 매우 낮음을 볼 수 있다. 인도의 영향의 정도 (Attribution Categories) 있어서는 여성과 남성복식 모두에 있어서 인도에서 직접 수입된(originated) item이 각각 전체의 90%와 81%를 차지하여, 인도복식의 영향은 받았으나 미국내에서 제작된(attributed and connotated) item 보다 휠씬 더 많은 수를 보였다. 인도복식스타일이 가장

• Journal of the Korean Magnetics Society
• /
• v.20 no.1
• /
• pp.18-23
• /
• 2010

Ferromagnetic resonance (FMR) measurement is an important experimental technique for the study of magnetic dynamics. We designed and set up the vector network analyzer ferromagnetic resonance (VNA-FMR) measurement system with home made coplanar waveguides (CPW). We examined 10-, 20-, 40-nm thick Py thin films to test the performance of the VNA-FMR measurement system. We measured S-parameter (transmission/reflection coefficient) of Py thin films on a CPW. Resonance frequency is investigated from 2.5 to 7 GHz for a field range from 0 to 490 Oe. The VNA-FMR data shows the resonance frequency increment when the external magnetic field increases. We also investigated Gilbert damping constant of Py thin film using resonance frequency (${\omega}_r$) and linewidth ($\Delta\omega$). After investigating dependence of thickness, we find that an decrease in S-parameter intensity as Py thin film thickness decreases. And the FMR results show that the effective saturation magnetization, $M_{eff}$, increase from 7.205($\pm$0.013) kOe to 7.840($\pm$0.014) kOe, while the film thickness varies from 10 to 40 nm.

• Journal of Korea Foundry Society
• /
• v.11 no.6
• /
• pp.475-481
• /
• 1991

In this study the fabrication technology and mechanical properties of AC8A/$Al_2O_3$ Composites by squeeze casting process were investigated to develope for application as the piston materials that require good friction, wear resistance, and thermal stability. AC8A/$Al_2O_3$ composistes without a porosity and the break of preform were fabricated at the melt temperature of $740^{\circ}C$, the preform temperature of $500^{\circ}C$, and mold temperature of $400^{\circ}C$ under the applied pressure of $1200kg/cm^2$ as the results of the observation of microstructures. As the results of this study, the tensile strength of AC8A/$Al_2O_3$ composites was not increased linearly with $Al_2O_3$ volume fraction and so it seemed not to agree with the rule of mixture, which had been used often in metal matrix composite. Also the tensile strength after thermal fatigue test was little different from that before the test. Consequently it was thought that AC8A/$Al_2O_3$ composites fabricated under our experimental conditions had a good thermal stability and subsequently a good interface bonding. Wear rate(i.e., volume loss per unit sliding distance) of AC8A/$Al_2O_3$ composites was decreased with $Al_2O_3$ volume fraction and the sliding speed at both room temperature and $250^{\circ}C$ and so there was a good correlation between wear rate and hardness. Also the wear rate of AC/8A20% $Al_2O_3$ composities was obtained the value of $1.65cm^3/cm$ at sliding speed of 1.14m/sec as compared with about $3.0\;{\times}10^{-8}cm^3/cm$ hyereutectie Al-Si alloy(Al-16%Si-2%Cu-1%Fe-1%Ni), which applied presently for piston materials. The wear behavior of $Al_2O_3$ composites was observed to a type of abrasive wear by the SEM view of wear surface.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.29-34
• /
• 2008

Generally, for conventional 3-D Hall sensor it is general that the sensitivity for $B_z$ is about 1/10 compared with those for $B_x$ or $B_y$. Therefore, in this work, we proposed 3-D Hall sensor with new structures. We have increased the sensitivity about 6 times to form the trench using anisotropic etching. And we have increased the sensitivity for the $B_z$ by 80 % compared with those of $B_x$ and $B_y$ using deposition of the ferromagnetic thin films on the bottom surface of the wafer to concentrate the magnetic fluxes. Sensitivities of the fabricated sensor with Ni/Fe film for $B_x,\;B_y$, and $B_z$ were measured as 361mV/T, 335mV/T, and 286mV/T, respectively. It has also showed sine wave of Hall voltages over a $360^{\circ}$ rotation. A packaged sensing part was $1.2{\times}1.2mm^2$. The measured linearity of the sensor was within ${\pm}3%$ of error. Resolution of the fabricated sensor was measured by $1{\times}10^{-5}T$.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.84-90
• /
• 2017

The electro-refining process was performed to recovery high purity copper from low grade copper containing sludge in sulfuric acid. The surface morphologies and roughness of electro-refining copper were analyzed with variation of the type and concentration of organic additives, the best surface morphology was obtained 5 ppm of the gelatin type and 5 to 10 ppm of the thiol type organic additive. The crude metal consisted of copper with 86.635, 94.969 and 99.917 wt.%, several impurity metals of iron, nickel, cobalt and tin by pyro-metallurgical process. After electro-refining process, the purity of copper increases to 3N or 4N grade. The impurity concentrations and copper purities of copper crude metals, electrolyte and electro-refining copper were analyzed using ICP-OES, the electro-refining time and purity of copper crude metal to recover 4N grade copper were deduced.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.133-148
• /
• 1987

Gibberellin(GA) 3-$\beta$ hydroxylation is very important for the shoot elogation in the higher plants, since only 3$\beta$-hydryoxylated GAs promote shoot elogation in several plants. Fluctuation of 3$\beta$-hydryoxylase activity was examined during seed maturation using two cultivars of , P. vulgaris, Kentucky Wonder (normal) and Masterpiece (dwarf). Very immature seeds of both cultivars contain high level of 3$\beta$-hydroxylase activity (per mg protein). Both cultivars showed maximum of enzyme activity (per seed) in the middle of their maturation process. Gibberellin 3$\beta$-hydroxylase catalyzing the hydroxylation of GA20 to GA1 was purified 313-fold from very early immature seeds of P. vulgaris. Crude soluble enzyme extracts were purified by 15% methanol precipitation, hydrophobic interaction chromatogrphy, DEAE ion exchange column chromatography and gel filtration HPLC. The 3$\beta$-hydroxylase activity was unstable and lost much of its activity duting the purification. The molecular weight of purified enzyme was extimated to be 42, 000 by gel filtration HPLC and SDS-PAGE. The enzyme exhibited maximum activity at pH 7.7. The Km values for [2.3-3H] GA20 and [2.3-3H]GA9 were 0.29 $\mu$M and 0.33 $\mu$M, respectively. The enzyme requires 2-oxoglutarate as a cosubstrate; the Km value for 2-oxoglutarate was 250 $\mu$M using 3H GA20 as a substrate. Fe2+ and ascorbate significantly activated the enzyme at all purification steps, while catalase and BSA activated the purified enzyme only. The enzyme was inhibited by divalent cations Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Hg2+. Effects of several GAs and GA anaogues on the putrified 3$\beta$-hydroxylase were examined using [3H]GA9 and GA20 as a substrates. Among them, GA5, GA9, GA15, GA20 and GA44 inhibited the enzyme activity. [13C, 3H] GA20 was converted by the partially purified enzyme preparation to [13C, 3H]GA1, GA5 and GA6, which were identified by GC-MS, GA9 was converted only GA4, GA15 and GA44 were converted to GA37 and GA38, respectively. GA5 was epoxidized to GA6 by the preparation. This suggests that 3$\beta$-hydroxylation of GA20 and epoxidation of GA5 are catalyzed by the same enzyme in P, vulgaris.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.61-72
• /
• 1993

Result of this study indicate that two criteria must be met in order to have effective macrocycle-mediated transport in these emulsionsystem. First, one must effective extraction of the post transition metals, $Cd^{2+}$. $Pb^{2+}$ and $Hg^{2+}$ , into toluene membrane. The effectiveness of this extraction is greatest if log K values for the metal-macrocycle interaction is large. Second, the ratio of the log K values for the metal ion-receiving phase to the metal ion-macrocycle interaction must be large enough to ensure quantitative stripping of the metal ion at the toluene phase interface. Control of the first step can be obtained by appropriate selection of macrocycle donor atom, substituents, and cavity radius. The second step can be controlled by selecting the proper complexing agent for inclusion in the receiving phase. The order of the transport, when using the several $A^-$ species such as $SCN^-$, $1^-$, $Br^-$ and $Cl^-$ is the order of the changing degree of solvation for $A^-$ and the transport of the metals is also affected by the control of concentration for receiving species because of solubility-differences. In this study, we can seperate each single metal ion from the mixture of $Cd^{2+}$, $Pb^{2+}$, and $Hg^{2+}$ ions by using the toluene membranes controlled by optimized conditions. Transport of the single metal is also very good, and alkaline and alkaline earth metals as interferences ions did not affect the seperation of the metals in this macrocycle-liquid membrances but transition metal ions were partially affected as interferences for the post transition metal ions.