• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.84-85
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.111-111
• /
• 1998

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.69-75
• /
• 1997

Thin films of $Si0_2(1000{\AA})/CoNiCr(400{\AA})/Cr$ were fabricated as a function of Cr thickness by KF magnetron sputtering. The saturation magnetization, coercive force and squareness with annealing temperature for these films were investigated. The values of saturation magnetization of $SiO_2/CoNiCr/Cr$ thin films decreased as the thickness of Cr underlayer increased, whereas coercive force increased as the thickness of Cr underlayer increased. The value of Ms was 600 emu/cc and the maximum value of Hc was 550 Oe. Especially, the value of saturation magnetization was rapidly decreased $SiO_2/CoNiCr/Cr(1700{\AA})$ thin films as the annealing temperature increased And the coercive force increased as the annealing temperature increased When annealing temperature was $650^{\circ}C$, the Ms was reduced to 90 % of the as-deposited film. And the Hc was showed maximum 1600 Oe. It was thought that Cr diffusion into CoNiCr layer reduced the magnetic moment of CoKiCr layer. In addition. Hc might he increased due to grain growth perpendicular to the film plane.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.193-193
• /
• 2013

본 연구에서는 치과용 주조합금의 개발을 위하여 Ni-Cr 및 Ni-Cr-Ti합금을 소결체를 제조하고 그 표면특성을 조사하였다. 결정조직은 Ti가 참가되면 결정립이 미세화되는 경향을 나타내었으며 Ti가 첨가되면 결정구조가 다르게 나타났다. Ti함량이 증가할수록 경도 값은 증가하였으며 Ti가 10wt% 첨가되었을 때 가장 높은 값을 보였다. 또한 압분체 < 소결체 < 벌크상태로 증가하는 경향을 보였다. 부식실험 결과 내식성은 Ti 함량이 증가함에 따라 증가하는 경향을 보였으며 벌크상태의 시편이 가장 좋은 내식성을 보였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.184-184
• /
• 2014

본 연구에서는 치과용 주조합금의 개발을 위하여 Ni-Cr 및 Ni-Cr-Ti합금을 소결체를 제조하고 기계적 특성 및 표면특성을 조사하였다. Ti원소가 첨가됨에 따라 결정조직의 결정립이 미세화하는 경향을 보였으며 조직이 다르게 나타났다. Ti 원소가 증가할수록 경도는 더욱 높게 나타났으며 Ti가 10 wt. %로 증가되었을 때 경도가 가장 높았다. 또한 압분체, 소결체, 벌크상태 순으로 경도가 증가하였다. 표면의 거칠기와 결합력에서도 Ti의 함유량이 증가함에 따라 개선되었다.

• The Journal of the Korean dental association
• /
• v.22 no.8 s.183
• /
• pp.705-714
• /
• 1984

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.471-477
• /
• 2000

Corrosion behavior of Fe-Ni-Cr alloy in molten salts of LiCl and LiCl-$Li_2O was investigated in the tempera-ture range of $650~850^{\circ}C$. In the molten salt of LiCl, and internal oxidation of Fe occurred in the KSA(Kaeri Superalloy)-1 alloy without containing Cr, while a dense protective oxide scale of $LiCrO_2$ was formed in the KSA-4, Incoloy 800H and KSA-5 alloys. In the mixed molten salt of LiCl-$Li_2O$, internal oxidation of Fe and Cr took place in the KSA-1 and KSA-4 alloys, respectively. Non-protective porous oxide scales consisting of $LiCrO_2$ and Ni were formed in the Incoloy 800H and KSA-5. The corrosion rate of the alloys increased with the increase in Cr content and the corrosion rate followed the parabolic law for the alloy containing Cr content less than 8%, and the linear law for the alloy containing Cr content more than 8%. Such a corrosion behavior of the alloy in the mixed molten salt of LiCl-$Li_2O$ was interpreted in terms of the basic fluxing mechanism of protective oxide scale of $Cr_2O_3$.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.337-344
• /
• 2012

Purpose: This study examined the corrosion level by alloy type and pH, and used the corrosion levels as the dental health data. The study utilized one Ni-Cr alloy for the full and removable partial denture metal frameworks and two Ni-Cr alloys for porcelain-fused-to-metal crown, among the non-beryllium dental casting non-precious Ni-Cr alloys. Methods: The alloy specimens were manufactured in $10cm^2$ and stored in the corrosive solution(pH 2.2-4.4) in the electrical water bath($37^{\circ}C$) for seven days. Afterwards, the metal ions were quantitatively analyzed using the ICP. Results: Of the three metal alloys, Bellabond-Plus$^{(R)}$alloy and SOLIBOND N$^{(R)}$alloy, with 22% or higher chrome chemical contents, had higher corrosion resistance than Jdium-100$^{(R)}$alloy with 20% chrome chemical content. In all three alloys, the corrosion of Ni was highest, and metal ion corrosion was higher in the pH 2.2 corrosive solution. Conclusion: Although Ni-Cr alloy was not very corrosive, a Ni-allergic patient should not have Ni-Cr alloy prosthesis. The Ni-Cr alloy for porcelain-fused-to-metal crown should be designed for the dental porcelain to cover the whole crown.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.46-55
• /
• 1997

This study has evaluated the liquation cracking behavior in the heat affected zone of several Ni base superalloys (Incoloy 825, Inconel 718 and Inconel 600). 304 and 310S austenitic stainless steels were also included for comparison. In addition, the mechanism of liquation cracking in the HAZ was postulated based on the extensive microstructural examinations with SEM, EDAX and TEM. The liquation cracking resistance of Ni base alloys was found to be far inferior to that of austenitic stainless steels. The liquation cracking of Incoloy 825 and Inconel 718 was believed to be closely related with the Laves-austenite(Ti rich in 825 and Nb rich in 718) and MC-austenitic eutectic phases formed along the grain boundaries by constitutional liquation and incipient melting under rapid welding thermal contraction. Further, liquation cracking resistance of the HAZ was dependent not only upon the type and amount of low melting phases but also on the grain size.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.147-152
• /
• 2003

질소 용해도가 낮은 ${\delta}$상으로 응고가 시작되는 16Cr-3Ni 계 스테인리스강의 응고시 질소기포 형성에 미치는 질소 함량과 냉각속도의 영향이 조사되었으며 이를 기반으로 질소 기포 결함이 발생하는 임계 질소 함량을 예측하는 방법을 제시하였다. 질소함량의 증가는 질소 기포 결함을 증가시켰으며, 냉각속도의 증가는 질소기포결함의 형성을 다소 억제 할 수 있는 것으로 조사되었다. 실험적으로 구한 Fe-16Cr-3Ni-9Mn 합금의 임계 질소 함량은 0.19wt%였으며, 임계 질소 압력은 평형응고로 가정한 경우 1.27atm, Scheil 응고로 가정한 경우에는 1.23atm으로 계산되었다. 질소 용해도를 증가시킬 수 있는 Mn 함량의 변화에 따른 임계 질소 함량의 변화를 예측하기 위하여 계산된 임계 질소 압력을 Fe-16Cr-3Ni-11Mn 합금에 적용하였으며 이를 통해 얻은 임계 질소 함량은 평형응고로 가정한 경우 0.25wt%, Scheil 응고로 가정한 경우에는 0.24wt% 로 예측되었다. 예측 결과의 타당성을 확인하기 위하여 Fe-16Cr-3Ni-11Mn 합금의 실험 결과와 비교하였으며, 일치하는 결과가 얻어졌다.