• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.4
• /
• pp.181-185
• /
• 1997

The electrochemical properties of the $AB_2$-type (Zr-Ti-V-Ni-Cr-Co-Mn) metal hydride electrodes prepared by ball milling with $AB_5-type\{(LM)Ni_{3.6}Al_{0.4}Co_{0.7}Mn_{0.3}\}$(LM : Lanthanum-rich mischmetal) alloy powder as a surface activator were investigated. By ball milling with $AB_5$ type alloy powder, the activation of $AB_2$ type metal hydride electrode was accelerated resulting in an increase of discharge capacity from 35% to 85% of the maximum capacity at the first cycle. As the amount of surface activator increased the activation rate increased, whereas the discharge capacity increased with 10wt% and decreased with 20wt% addition of the surface activator. When the amount of the surface activator was kept constant as 10wt%, the discharge capacity and the activation rate increased with ball milling time up to 20 hours. However beyond 20 hours of ball milling time, they decreased drastically due to the nano-crystallization or amorphorzation of the alloy powder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1464-1470
• /
• 2005

To assure the safety of the major edible seaweeds, we collected the 176 samples of seaweeds such as laver(Porphyra sp.), sea mustard (Undaria pinnatifida), sea tangle (Laminaria japonica) and sea lettuce (Enter-omorph sp.) from Korean coast. We investigated the contents of the trace metals in the edible seaweeds, and the values were expressed as the dry weight of sea weeds. The mean levels of the trace metals were high in the oder of Zn ($36.19{\pm}27.14 \;{\mu}g/g$), Mn ($28.75{\pm}28.03\;{\mu}g/g$), and Cu ($6.82{\pm}7.62\;{\mu}g/g$), which are necessary metals in the human body, and then followed by Cr ($1.54{\pm}2.07\;{\mu}g/g$), Ni ($1.29{\pm}2.57\;{\mu}g/g$), Pb ($0.89{\pm}1.11\;{\mu}g/g$), Cd ($0.72{\pm}0.80\;{\mu}g/g$) and Hg ($0.01{\pm}0.02\;{\mu}g/g$). The contents of Cd and Zn were high in the laver, Cr, Ni and Pb were detected highly in sea lettuce, and Hg was detected highly in sea tangle. Significant linear correlations were obtained among 28 different pairs of metals, some of them highly correlated (r>0.5, p<0.05),such as Ni-Mn, Zn-Ni, Cu-Pb and Cu-Zn in laver, Ni-Zn in sea mustard, Cu-Pb, Cu-Zn and Mn-Pb in sea tangle, and Ni-Cr in sea lettuce. And, the trace metal contents of seaweeds varied with parts and kinds of samples. The average weekly intakes of Hg, Cd and Pb from seaweeds were about $0.07{\~}3.57\%$ of PTWI (Provisional Tolerable Weekly Intakes) which has set by FAO/WHO to evaluate the safeties of trace metals in food. Therefore, it was found that they showed very safe levels in the edible seaweeds.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.413-426
• /
• 2009

The study was conducted to investigate the effects of indigenous bacteria on geochemical behavior of toxic heavy metals in contaminated paddy soil near an abandoned mine. The effects of sulfate amendment to stimulate microbial sulfate reduction on heavy metal behaviors were also investigated. Batch-type experiments were performed with lactate or glucose as a carbon source to activate indigenous bacteria in the soil under anaerobic condition for 100 days. Sulfate (250 mg/L) was artificially injected at 60 days after the onset of the experiments. In the case of glucose supply, solution pH increased from 4.8 to 7.6 while pH was maintained at 7~8 in the lactate solution. The initial low pH in the case of glucose supply likely resulted in the enhanced extraction of Fe and most heavy metals at the initial experimental period. Lactate supply exerted no significant difference on the amounts of dissolved Zn, Pb, Ni and Cu between microbial and abiotic control slurries; however, lower Zn, Pb and Ni and higher Cu concentrations were observed in the microbial slurries than in the controls when glucose supplied. Sulfate amendment led to dramatic decrease in dissolved Cr and maintenance of dissolved As, both of which had gradually increased over time till the sulfate injection. Black precipitates formed in solution after sulfate amendment, and violarite($Fe^{+2}{Ni^{+3}}_2S_4$) was found with XRD analysis in the microbial precipitates. Conceivably the mineral might be formed after Fe(III) reduction and microbial sulfate reduction with coprecipitation of heavy metal. The results suggested that heavy metals which can be readily extracted from contaminated paddy soils may be stabilized in soil formation by microbial sulfate reduction.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.27-35
• /
• 2008

Sediment cores were obtained from Upo and Mokpo in Upo Wetland and core samples were divided by depth into 20 ~ 21 subsamples. The heavy metal concentrations of Fe, Mn, Zn, AS, Cu, Cd, Ni, Pb, and Cr in the sediments of each depth were determined by ICP-MS. The texture of sediemnts from Upo Wetland appeared to be clayey silt with average grain size of $7.52{\sim}11.15{\mu}m$ for physical properties. It was found to have a clear tendency of depth profile with respect to TOC and ignition loss. Organics were stabilized in the range of 0.5 ~ 0.7 % TOC and 8 ~ 9 % ignition loss in 30 years, whereas, the surficial sediments have the highest concentrations of about 3.0 % of TOC and 13 ~ 15 % ignition loss. Those are much higher than the values of the main stream, the Nakdong River, which reflects the deposit of biodegradable organics from plants and other lifes. The vertical distribution of heavy metals in two sediment cores was investigated to elucidate historical trends of heavy metals deposited into Upo wetland. The depth profile concentrations of each heavy metal were compared and discussed with the Concensus-Based Sediment Quality Guidelines for freshwater ecosystems. All the Cd data for the vertical distribution in the sediments were detected above PEC value for Cd, which predict harmful effects on sediment-dwelling organisms expected to occur frequently. The concentrations of Zn, Cu, and Cr in all sediment samples for depth profile were detected below the TEC values, which provided a basis predicting the absence of toxicity by Zn, Cu, and Cr.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.1
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.77-81
• /
• 2002

Many kinds of Pb-free solder have been investigated because of the environmental concerns. Sn-Ag-Cu system is well blown as most competitive Pb-free solder. However, since Sn-Ag-Cu system has relatively high melting point compared to Sn-Pb eutectic, it may a limitation, the some application. In this study, Bi and In contained solder of $Sn_3Ag_8Bi_5In$ which has relatively lower melting point, $188~204^{\circ}C$, was investigated. $Sn_3Ag_8Bi_5In$ solder ball of $500\mu\textrm{m}$ diameter was set on the Ni/Cu/Cr-UBM and reflow soldered in the range of $220~240^{\circ}C$ for 5~15s. The maximum shear strength of the solder ball was around 170mN by reflowing at $240^{\circ}C$ for 10s. Intermetallic compound formed on the UBM of Si-wafer was analysed by SEM(scanning electron microscope) and XRD(X-ray diffractometer).

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.5-11
• /
• 1998

The purpose of this study is to evaluate the castability and surface roughness of the casts using Non-percious alloys. For samples of 25 wax patterns, it is made from eight layers of sheet wax, arranged in the escalating layers. After fabricated wax patterns, using 5 kinds of Ni-Cr alloys is casted, and the casts are sandblasted. To castability, magnifier is used and values of surface roughness of the casts is measured with profilometer(tracing length 1.75mm, cutoff value 0.25mm) The results are as follows : 1. The castanbility of alloys, in case of C alloys, showed with $8.0{\pm}0.0000$, and in case of CS alloys and N alloys showed equal with $7.8{\pm}0.4472$, respectively. T alloys and V alloys showed equal with $7.2{\pm}0.4472$, respectively. 2. The values of surface roughness of the casts are decreased more T alloys than in case of order alloys, and in order, increased in case of CS alloys, C alloys, V alloys, N alloys, respectively.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.14-23
• /
• 1997

An MMIC downconverting mixer for cellular phone application has been successfully developed using an MMIC process including $1 \mu\textrm{m}$ ion implanted gaAs MESFET and passive lumped elements consisting of spiral inductor, $Si_3N_4$ MIM capacitor and NiCr resistor. The configuration of the mixer presented in this paper is single-ended dual-gate FET mixer with common-source self-bias circuits for single power supply operation. The dimension of the fabricated circuit is $1.4 mm \times 1.03 mm $ including all input matching circuits and a mixing circuit. The conversion gian and noise figure of the mixer at LO powr of 0 dBm are 5.5dB and 19dB, respectively. The two-tone IM3 characteristics are also measured, showing -60dBc at RF power of -30dBm. Allisolations between each port show better than 20dB.

• Laser Solutions
• /
• v.2 no.2
• /
• pp.8-17
• /
• 1999

This study includes a basic feature of laser surface alloying for enhancing the surface properties of materials. Effects of laser processing parameters such as beam power, beam size, scanning speed on the shape and composition of alloyed layer was simulated in case of moving beam conditions (2-dimensional numerical methods). Simulated results were compared with experiments, in which the plasma coating of 80% Ni ＋ 20% Cr deposited on the SS41 substrate was remelted with CO2 laser with Gaussian energy distribution. Simulation and experiments revealed that the shape (dimension)and composition of laser alloyed layer were strongly dependent upon the process parameters, especially interaction time (travel speed) as compared to beam diameter, beam power and absorptivity. The shape and composition of alloyed layervaried more or less exponentially with parameters.

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1301-1307
• /
• 1995

Pitting corrosion of TiN film deposited on Inconel 600 by plasma assisted chemical vapor deposition (PACVD) was investigated. Cyclic potentiodynamic polarization (CPP) tests were conducted in order to determine the pit nucleation potentials, Enp, of the TiN-deposited sample and the bare Inconel 600 in deaerated NaCl solution at 25, 135 and 20$0^{\circ}C$. The effects of the TiN film thickness, the solution temperature and the Cl- concentration on Enp were studied. Enp of the TiN-deposited sample which had the film thickness above 1${\mu}{\textrm}{m}$ were higher than those of the bare Inconel 600 by 300~600mV at all the solution temperatures, implying the pitting resistance improvement of the TiN film. The morphologies of the pits generated after immersion test were examined with a scaning electron microscopy. The higher was the solution temperature, the more corrosion products, mainly composed of Cr and Ni oxides, were formed.