• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.

• Journal of Preventive Medicine and Public Health
• /
• 제22권1호
• /
• pp.116-124
• /
• 1989

일부 중금속에 의한 배양임파구에서 세포유전학적 독성을 알아보고자 $NiCl_2,\;K_2Cr_2O_7CdCl_2$ 및 $HgCl_2$에 의한 SCE빈도 및 염색체이상을 조사한 결과는 다음과 같다. SCE빈도는 공시한 중금속 모두에서 농도증가에 따라 대조군의 $7.20{\pm}2.5$에 비해 유의하게 증가되었으며(p<0.05), 각 중금속의 최고 SCE빈도는 $NiCl_2$의 경우 $1{\times}10^{-4}M$에서 $11.6{\pm}4.0,\;K_2Cr_2O_7$의 경우 $1{\times}10^{-5}M$에서 $16.3{\pm}4.1,\;CdCl_2$의 경우 $1{\times}10^{-6}M$에서 $11.4{\pm}5.5$ 및 $HgCl_2$의 경우 $1{\times}10^{-5}M$에서 $12.6{\pm}5.5$로 나타났다. 또한 공시한 농도에서 가장 높은 SCE유발 중금속은 6가 크롬이었으며 니켈, 카드뮴, 수은은 비교적 낮은 SCE빈도를 보였다. 염색체이상은 gap, break, 기타의 순으로 그 빈도가 감소하였으며 염색체이상을 갖는 세포의 전체빈도는 니켈과 크롬화합물에서는 농도증가에 따라 증가되었고 크롬의 경우 대조군의 2.0%에 비해 $1{\times}10^{-4}M$에서는 15.7%로 가장 높은 염색체이상 빈도를 보였다. 염색체이상 유형별로는 니켈의 경우 염색체 gap은 농도증가에 따라 용량대 반응으로 증가한 반면 break는 유의한 변화가 없었으며 크롬의 경우는 gap과 break가 비슷한 양상으로 증가되었다. 그러나 수은과 카드뮴의 경우에서는 염색체이상이 거의 유발되지 않았다.

• 한국패류학회지
• /
• 제25권3호
• /
• pp.213-222
• /
• 2009

해수 및 양식 참굴의 중금속 농도를 분석한 결과 일부 지역에서 간헐적으로 기준치를 초과하였지만 아직까지 뚜렷한 오염 현상은 확인되지 않았다. 그러나 기존 조사한 결과와 비교하면 미량이지만 증가 추세를 보이고 있어 지속적인 감시 및 관리체계 구축이 필요하다고 생각된다. 참굴의 중금속 생물농축계수를 조사한 결과 경남 연안에 서식하는 참굴의 생물농축계수는 청정해역과 오염해역의 중간이행 단계에 해당하였다. 특히 카드뮴의 생물농축계수가 다른 금속에 비해 월등히 높으므로, 이러한 특성을 활용하면 참굴을 Cd 등 중금속 오염 모니터링에 활용할 수 있을 것이다. 특히 카드뮴은 다른 원소들의 생물농축과 가장 밀접한 상관관계가 있는 것으로 조사되었다. 특히 카드뮴과 납이 가장 일정한 상관관계를 나타내는 것은 경남 연안의 해역의 주요 중금속 유입원은 화석연료유의 연소에 의해 유래된 것으로 추정된다. 다차원척도분석법에 의한 수질자료와 중금속 농축경향을 분석한 결과 경남 연안의 양식 참굴의 중금속 유입원은 강우에 의한 일시적 유입보다는 클로로필 a 및 투영도 등과 밀접한 유사성을 지니는 것으로 보아 통영연안에 서식하는 참굴의 중금속 축적은 대부분 먹이연쇄를 통해 이루어지는 것으로 본다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.309-310
• /
• 2005

Some minor elements(Al, B, Ba, Ca, Cd, Co, Cr, Cu, Gd, Mg, Mn, Mo, Nd, Ni, P, Pb, Si, Sn, Sr, Ti, V, Yb, Zn and Zr) in iron compounds such as the S/G sludge of a power plant were separated from iron by anionic and cationic exchange methods. If a ICP-AES or AAS determination follows this method, minor elements of more than 2 or 20 ppm of Fe can be determined with an error less than 20% except Sn and Mo. Alkaline elements were excluded from this study since they can be easily recovered from an anionic exchange. Application to real sludge samples is ongoing.

• The Korean Journal of Ecology
• /
• 제27권1호
• /
• pp.15-20
• /
• 2004

With attention to different human activities around Anzali wetland and introduction of different pollutants containing heavy metals into this water ecosystem and absorption and accumulation of heavy metals in shell and muscle of Astacus leptodactylus which is native benthose of Anzali wetland and enjoys food and economic importance; Sampling of waters and sediments from 18 stations and shell and muscle of Astacus leptodactylus from 5 stations had been conducted. After biometric evaluation of Astacus leptodactylus, the chemical analysis of the samples by using international and standard methods and then their heavy metals content was determined by Atomic Absorpotion Spectrophotometer (AAS), model P.U 9400 philips. Result of the analysis stated that; 1) The mean values of Cr, Zn, Pb, Ni, V in Anzali waters were 6.4, 184.5, 28.8, 28.9, 47.1 ($\mu$ gr/lit) respectively, which comparing to the international standards, is not suitable for drinking, but it can be used for agricultural and aquacultural purposes. Even though the concentration of heavy metals in sediments were high, there are in range of acceptable limit for aquatics organisms; 2) Comparatively, the concentration of heavy metals in shell and muscle of Astacus leptodactylus in Anzali wetland (Cr, Zn, Pb, Ni, V in shell were 3.48, 109.3, 14.13, 7.17, 36.2 and in muscle were 2.98, 131.98, 3.12, 4.77, 9.05 ppm respectively) were more than what is determined for Aras dam (in shell were 1.6, 224.3, 7.8, 7.6, 10.3 and in muscle were 1.4, 60.2, 0.45, 2.7, 4.4 mg/kgr respectively); 3) For all samples, concentration of heavy metals in all Astacus leptodactylus in Anzali wetland and Aras dam, was at tolerance level for human consumption; 4) There was no association with significant difference between weight and size of Astacus leptodactylus with absorption and accumulation of heavy metals; but there was a significant association between heavy metals content in water and in sediments, and in sediments, shell and muscle of Astacus leptodactylus in Anzali wetland.

• 대한화학회지
• /
• 제44권3호
• /
• pp.200-206
• /
• 2000

실리콘 웨이퍼를 일정한 두께로 에칭하여 실리콘 웨이퍼 표면 근처의 특정영역에 존재하는 금속불순물을 정량하였다. HF와 $HNO_3$의 부피비를 1:3으로 혼합한 용액 5mL로 20분간 실리콘 웨이퍼와 반응 시켰을 때 1${\mu}m$ 두께로 웨이퍼 전면을 균일하게 에칭할 수 있었다. 에칭 후, 용액을 중발하기 위해 마이크로파 오븐을 사용하였는데 증발과정에서 spike한 Cu, Ni, Zn, Cr, Mg 및 K의 회수율은 99∼105%였다,Cu를 오염시킨 epitaxial 실리콘 웨이퍼의 경우 에칭법으로 전처리를 하여 ICP${\cdot}MS$로 측정한 결과, Cu는 뒷면의 표면으로부터 1∼2${\mu}m$ 안의 polysilicon영역에 집중적으로 분포하였고 Cu 농도를 1${\mu}m$두께의 범위에서 정량할 수 있었다.

• 환경영향평가
• /
• 제16권5호
• /
• pp.327-340
• /
• 2007

The $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Busan from March to May, 2005, and the concentrations of some metallic elements were analysed to study their characteristics. The mean concentration of $PM_{10}$ was $66.5{\pm}23.0{\mu}g/m^3$ with a range of 22.2 to $118.1{\mu}g/m^3$. The mean concentration of $PM_{2.5}$ was $46.1{\pm}17.2{\mu}g/m^3$ with a range of 9.7 to $83.3{\mu}g/m^3$. The ratio of $PM_{2.5}/PM_{10}$ was 0.69 at Busan. The distribution of metallic elements for $PM_{10}$ and $PM_{2.5}$ were Cd${\ldots}$ ${\ldots}$ $PM_{10}$ were $94.9{\mu}g/m^3$ and $63.7{\mu}g/m^3$, respectively. And The mean mass concentrations of Asian dust and non Asian dust in $PM_{2.5}$ were $56.9{\mu}g/m^3$ and $45.1{\mu}g/m^3$, respectively. The mean values of crustal enrichment factors for five elements (Cd, Cu, Pb, V and Zn) were all higher than 10, possibly suggesting the influence of anthropogenic sources. The soil contribution ratios for $PM_{10}$ and $PM_{2.5}$ were 20.5% and 19.4, respectively.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.170-177
• /
• 2016

Objectives: This study was conducted to evaluate the total heavy metals contents and chemical forms in the animal manure compost. Materials and methods: A total of 109 compost samples were collected throughout the country and classified into three groups in accordance with the raw materials; pig manure, poultry manure and mixed(pig+poultry+cattle) manure. The compost samples were analyzed for total metal content and sequential chemical extraction to estimate the quantities of metals. Results: Concentrations of Zn and Cu in several compost samples were higher than the maximum acceptable limits by the Korea Compost Quality Standards. Concentrations of Zn, Cu, and Cd in compost samples were 257~5,102, 68~1,243, and 0.02~2.54 mg/kg respectively, while Cr, Ni, As, and Pb were < 20 mg/kg. The concentrations of heavy metals in pig manure compost were higher than those of both the poultry and the mixed manure compost. The predominant forms for extracted metals were Cr, Ni, Zn, As, and Pb, residual; Cu, organic; and Cd, carbonate. Conclusions: Results indicate that the Zn and Cu contents in compost were higher than other heavy metals and the heavy metal contents were greater in pig manure compost followed by mixed and poultry manure compost. To prevent the accumulation of heavy metals in soil where animal manure compost is applied, strategy for reducing heavy metal concentrations in animal manure and compost must be considered.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.214-219
• /
• 2008

The zirconia ceramics are widely used because of their excellent mechanical properties. Recently, many researches to make a colored zirconia was achieved to satisfy the individual aesthetic requirements. In this study, the synthesis of black-color spinel-based inorganic pigments which are stable above $1400^{\circ}C$ and the fabrication of black-colored zirconia using the synthesized pigments are investigated. Inorganic pigments which have spinel structure and near black color were synthesized by a solid state reaction method using a $Fe_2O_3,\;Cr_2O_3$, CoO and NiO powder as a starting materials at $1600^{\circ}C$. Most of synthesized pigments were black colored spinel phases and single spinel phase was successfully synthesized at the composition range of $Cr_2O_3:25{\sim}35%,\;Fe_2O_3:45{\sim}55%$, CoO:20% and NiO:$6{\sim}10%$. The black-colored zirconia was fabricated at $1410^{\circ}C$ with the 5 wt% synthesized pigments and their properties were evaluated. The results showed that the strength value was more than 848 MPa, absorption rate was 0.1%, the brightness of color was $L^*:40{\sim}42$, the tone of color is $a^*:0.2{\sim}0.8$ and $b^*:-1.1{\sim}2.4$. As a result, the black-colored zirconia was suitable for a artificial jewelry or decoration zirconia goods.

• 한국대기환경학회지
• /
• 제26권2호
• /
• pp.190-201
• /
• 2010

Fine particulate matter < $1.8{\mu}m$ was collected as a slurry using the Semicontinuous Elements in Aerosol Sampler with time resolution of 30-min between May 23 and 27, 2002 at the Sydney Supersite, Florida, USA. Concentrations of 11 elements, i.e., Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Se, and Zn, in the collected slurry samples were determined off-line by simultaneous multi-element graphite furnace atomic absorption spectrometry. Temporal profiles of $SO_2$ and elemental concentrations combined with meteorological parameters such as wind direction and wind speed indicate that some transient events in their concentrations are highly correlated with the periods when the plume from an animal feed supplement processing facility influenced the Sydney sampling site. The peaking concentrations of the elemental species during the transient events varied clearly as the plume intensity varied, but the relative concentrations for As, Cr, Pb, and Zn with respect to Cd showed almost consistent values. During the transient events, metal concentrations increased by factors of >10~100 due to the influence of consistent plumes from an individual stationary source. Also the multi-variate air dispersion receptor model, which was previously developed by Park et al. (2005), was applied to ambient $SO_2$ and 8 elements (Al, As, Cd, Cr, Cu, Fe, Pb, and Zn) measurements between 20:00 May 23 and 09:30 May 24 when winds blew from between 70 and $85^{\circ}$, in which animal feed processing plant is situated, to determine emission and ambient source contributions rates of $SO_2$ and elements from one animal feed processing plant. Agreement between observed and predicted $SO_2$ concentrations was excellent (R of 0.99; and their ratio, $1.09{\pm}0.35$) when one emission source was used in the model. Average ratios of observed and predicted concentrations for As, Cd, Cr, Pb, and Zn varied from $0.83{\pm}0.26$ for Pb to $1.12{\pm}0.53$ for Cd.