• Title/Summary/Keyword: Ni-20 Cr

Search Result 319, Processing Time 0.028 seconds

지렁이를 이용한 우유가공 폐수처리장 슬러지의 효율적 퇴비화 (Vermicomposting of Sludge from Milk Processing Industry (MPS))

  • 서정윤
    • 대한환경공학회지
    • /
    • 제34권7호
    • /
    • pp.488-494
    • /
    • 2012
  • 이 연구에서는 우유가공 : 제지 : 분뇨 슬러지의 습무게 비율을 0 : 80 : 20, 25 : 60 : 15, 50 : 40 : 10, 75 : 20 : 5 그리고 100 : 0 : 0의 5가지 비율로 섞은 혼합물을 지렁이에 급이 하여 2주 후 유기물의 분해율과 생산된 분변토의 이 화학적 특성을 조사하였다. 그 결과는 다음과 같다: 분변토를 생산하기 위하여 지렁이에 우유가공 슬러지만을 급이 하였을 때와 우유가공 슬러지 25%, 제지 슬러지 60% 그리고 분뇨 슬러지 15%로 섞어 급이 하였을 때 분해율이 가장 높았으며 각각 19.9와 19.1%로 비슷하였다. 우유가공 슬러지만을 급이 하였을 경우가 우유가공 슬러지와 분뇨 및 제지 슬러지를 혼합 급이 하였을 경우보다 분해율이 높아 오히려 우유가공 슬러지만 지렁이에 급이 하는 것이 다른 슬러지와 혼합하여 급이 하는 것보다 적합하였다. 퇴비화 기간 2주 후 생성된 분변토 중 회분, T-P, $NO_2{^-}-N$, $NO_3{^-}-N$, Mg, K 함량은 증가하였으나 수분, VS, TKN, $NH_4{^+}-N$, Ca 함량은 감소하였다. 분변토의 중금속 함량은 분해율이 가장 높았던 MPS-100의 경우 Hg를 제외하고 모두 증가하였다. 나머지의 경우 As, Cd, Cu 그리고 Ni 함량은 지렁이에 급이 한 후 증가하였다. 반면에 Hg과 Pb는 감소하였다. 그러나 Zn의 함량 차이는 미미하였으며 Cr과 Ni은 뚜렷한 경향을 보이지 않았다. 분변토의 pH는 초기 혼합물의 pH 보다 감소하였다. 우유가공 슬러지만 그리고 우유가공, 제지와 분뇨 슬러지를 다른 비율로 섞은 4가지 혼합물을 지렁이에 급이 하여 생산된 분변토들은 모두 비료공정규격 부산물비료의 기준을 충족하였다.

임피던스법을 적용한 연료전지 성능규명 (Fuel Cell Performance by the Impedance Method)

  • 김귀열;서장수;박용필;이준웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.157-159
    • /
    • 2001
  • The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti alloys has been done in (62+38)mol% (Li+K)C03 melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method. And, The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way, Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by the impedance characteristics, overvoltage. As a result, the performance of Ni-YSZ anode(40vol%) was better excellent than the others.

  • PDF

열화학기상합성한 탄소나노튜브의 pulse에 따른 전계방출 특성 (Field emission characteristics of carbon nanotubes synthesized by thermal chemical vapor deposition under pulse conditions)

  • 김범권;공병윤;선전영;이내성;김하진;한인택;김종민
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.123-123
    • /
    • 2003
  • 탄소나노튜브는 지금까지의 많은 연구를 통해 다양한 분야에 대한 응용 가능성이 확인되었으며, 그 중에서도 특히 탄소나노튜브를 이용한 전계방출표시소자(carbon nanotube field emission display, CNT-FED)는 상용화를 눈앞에 두고 있는 상황이다. 본 연구에서는 탄소나 노튜브를 합성할 수 있는 여러 가지 방법 중에서 열화학기상증착법(thermal chemical vapor deposition, thermal CVD)을 이용하여 유리기판 위에 탄소나노튜브를 합성하였다. Electron beam evaporation으로 유리기판 위에 전극층으로 Cr을 150nm를 증착하고 연속하여 촉매층인 Invar(Fe-53%Ni-6%Co 합금)를 10nm의 두께로 형성하였다. 사진식각으로 Cr층을 line 패턴한 후 Cr line 내의 Invar층을 line 및 dot 패턴하였다. 나노튜브 합성을 위해 480-58$0^{\circ}C$까지 진공분위기 또는 질소 분위기에서 20분간 승온한 후 CO(150sccm)와 H$_2$(1200sccm)를 주입하여 20분간 성장시키고 질소 분위기에서 냉각시켰다. 성장된 탄소나노튜브는 SEM, TEM, Raman spectroscopy 등을 통하여 구조 및 형상분석을 하였다. 진공승온의 경우 탄소불순물인 a-C이 많은 양 증착 되었으며 탄소나노튜브는 온도에 따라 1-5$\mu\textrm{m}$의 두께로 성장하였으나, 질소분위기 승온의 경우는 a-C이 거의 증착되지 않았으며 나노튜브의 두께가 10-20$\mu\textrm{m}$였다. 본 연구에서는 diode구조를 갖는 탄소나노튜브 에미터의 수명예측을 위해 여러 가지 가속측정조건에서 전계방출 특성을 연구하였다. Anode와 cathode 간의 간격을 400$\mu\textrm{m}$로 유지한 diode 구조에 대해 $10^{-6}$ torr 이하의 진공에서 전계방출을 측정하였다. 100 line의 에미터를 60Hz의 주파수에서 1/100 duty로 구동하였으며, duty비 증가에 따라 pulse의 on-time을 고정하고 frequency를 변화시켰다. dc까지 duty비가 증가됨에 따라 방출전류의 양이 선형적으로 증가하였다. 전압을 일정하게 고정시키고 각 duty비에서 시간에 따라 방출전류를 측정한 결과 duty비가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다.

  • PDF

서울지역의 PM10 중 미량원소의 특성 평가 (Trace Elements Characterization of PM10 in Seoul Area)

  • 신은상;최민규;영선우;정용삼
    • 한국대기환경학회지
    • /
    • 제18권5호
    • /
    • pp.363-372
    • /
    • 2002
  • PM$_{10}$ aerosols were collected using low volume air sampler every month intervals from September 1992 to August 1991 in Seoul. These samples were analyzed for 20 trace elements (Al, As, Ba, Br, Ca, Cl, Co, Cr, Fe, K, Mn, Na, Ni, Pb, Sc, Se, Si, Ti, V and Zn) by INAA (instrumental neutron activation analysis), XRF (x-ray fuorescence spectrometer), and ICP (inductively coupled plasma). PM$_{10}$ mass concentrations higher than 70 $\mu$g/m$^3$ were 32% of 60 samples and had significantly higher concentrations in spring and winter than in summer and fall (p-value<0.001). The elements of As, Br, Cl, Ni, Pb, Se, V, and Zn are enriched by factors of 20 to 2,000 relative to their natural abundance in crustal soil. To further identify common sources of pollution-related trace elements, factor analysis was applied to the trace elements concentration data. Major sources that contribute to the atmospheric loading of these elements were found to include fossil fuel combustion, automobile and waste incineration (33.2%), metal processing industry (18.2%), and soil(29.8%).8%).

낮은 저항온도계수를 갖는 박막 저항체 제작 및 신뢰성 특성 평가 (Fabrication and Reliability Properties of Thin film Resistors with Low Temperature Coefficient of Resistance)

  • 이붕주
    • 한국전기전자재료학회논문지
    • /
    • 제20권4호
    • /
    • pp.352-356
    • /
    • 2007
  • The Ni/Cr/Al/Cu (51/41/4/4 wt%) thin films were deposited by using DC magnetron sputtering method for the application of the resistors having low TCR (temperature coefficients of resistance) and high resistivity from the former printed-results[3]. The TCR values measured on the as-deposited thin film resistors were less than ${\pm}10\;ppm/^{\circ}C$ and $-6{\sim}+1\;ppm/^{\circ}C$ after annealing and packaging process. The TCR values were $-3{\sim}1\;ppm/^{\circ}C$ (ratio of variation : about 0.02 %) and $-30{\sim}20\;ppm/^{\circ}C$ (ratio of variation : about $0.5{\sim}1\;%$) for the thermal cycling and PCT (pressure cooker test), respectively. It was confirmed that the reliability properties of the thin film resistor were good for electronic components.

주암댐 호저 퇴적물에서의 수직적 중금속 분산과 $^{210}Pb$를 이용한 퇴적속도산정 (Vertical Distribution of Heavy Metal Concentrations in Sediment Cores and Sedimentation Rate Using $^{210}Pb$ Dating Technique in the Juam Reservoir)

  • 이평구;염승준;연규훈;지세정;김지욱;오창환;김선옥
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권1호
    • /
    • pp.43-57
    • /
    • 2005
  • 주암댐에 유입된 호저퇴적물의 입도(2mm-200{\mu}m,\;200-100{\mu}m,\;100-50{\mu}m,\;50-20{\mu}m,\;<20{\mu}m)별 중금속(As, Cd, Cr, Cu, Ni, Pb, Zn)의 이동과 퇴적 후 중금속의 수직적 분산 특성을 규명하기 위하여 12개 지점의 호저퇴적물과 3개 지점의 코아시료를 채취하였으며, 코아시료는 2-5 cm 간격으로 절단하여 깊이별 간극수와 퇴적물의 중금속 함량을 측정하였다. 호저퇴적물의 퇴적속도를 측정하기 위하여 코아시료에 대한 $^{210}Pb$ 동위원소 연구를 수행하였다. 주암댐 호저 퇴적물의 중금속 및 미량원소의 함량은 퇴적위치와 상관없이 거의 일정한 함량을 보이며.,평균 함량은 $As\;14.9\;{\mu}g/g,\;Cd\;0.81\;{\mu}g/g,\;Cu\;30.7\;\;{\mu}g/g,\;Ni\;34.7\;{\mu}g/g,\;Pb\;63.3\;{\mu}g/g,\;Zn\;87.9\;{\mu}g/g$이다. Cu, Pb, Zn, Ni 및 Cd의 함량은 $20\;{\mu}m$ 이하 입도의 퇴적물에서 가장 높은 반면, As는 $2mm-200{\mu}m$ 혹은 $200-100\;{\mu}m$ 입도의 퇴적물에서 가장 높다. 간극수에 용해된 원소 중에서 가장 함량이 높은 것은 Fe와 Mn 이었으며, 코아시료의 상부로부터 심부로 갈수록 함량이 증가하는 수직적 분산특성을 나타낸다. 반면에 용존 Zn과 Cu함량은 코아시료의 최상부에서 가장 높게 나타나며, 이는 산화:환원 전위차에 따른 유기물질 및 산화광물의 용해작용과 관련이 있다. 코아시료의 퇴적물 내 Cu, Ni, Pb 및 Zn 함량은 0-4 cm구간에서 가장 높은 표면집적 현상이 관찰되며, Pb와 Cu 함량이 현저하게 높은 데, 이는 인위적인 오염에 기인하는 것으로 해석된다. $'unsupponed\;^{210}Pb'$을 이용하여 계산된 호저퇴적물의 퇴적 속도는 $\omega=0.91\;cm\;year^{-1}$ 이며, 이를 적용하면 주암댐이 완공된 이후 약 10 cm의 퇴적물이 평균적으로 퇴적된 것으로 추정된다. 이러한 자료는 주암댐 호수 바닥에 퇴적된 퇴적물의 관리방안을 마련하는 데 중요한 정보로 사용될 수 있을 것이다.

Nb이 첨가된 STS 444 페라이트계 스테인리스강의 고온질화 열처리시 조직변화 (Phase Changes during High Temperature Gas Nitriding of Nb Alloyed STS 444 Ferritic Stainless steel)

  • 공정현;유대경;이해우;김영희;성장현
    • 열처리공학회지
    • /
    • 제20권6호
    • /
    • pp.323-328
    • /
    • 2007
  • This study has been investigated the effect of high temperature gas nitriding (HTGN) heat treatment of STS 444 (18Cr-0.01Ni-0.01C-0.2Nb) ferritic stainless steel in an atmosphere of nitrogen gas at the temperature range between $1050^{\circ}C\;and\;1150^{\circ}C$. The surface layer was changed into martensite and austenite with the nitrides of NbCrN by HTGN treatment. Due to the precipitation of nitrides and matrensite formation, the hardness of the surface layer showed $400Hv{\sim}530Hv$. The nitrogen concentration of the surface layer appeared as 0.05%, 0.12% and 0.92%, respectively, at $1050^{\circ}C,\;1100^{\circ}C\;and\;1150^{\circ}C$. When the nitrogen is permeated from surface to interior, Nb and Cr, which have strong affinities with nitrogen, also move from interior to surface. Therefore it is considered that this counter-current of atoms promotes the formation of NbCrN at the surface layer.

Health Risks to Children and Adults Residing in Riverine Environments where Surficial Sediments Contain Metals Generated by Active Gold Mining in Ghana

  • Armah, Frederick Ato;Gyeabour, Elvis Kyere
    • Toxicological Research
    • /
    • 제29권1호
    • /
    • pp.69-79
    • /
    • 2013
  • The purpose of this study was to investigate the current status of metal pollution in the sediment from rivers, lakes, and streams in active gold mining districts in Ghana. Two hundred and fifty surface sediment samples from 99 locations were collected and analyzed for concentrations of As, Hg, Cr, Co, Cu, Fe, Zn, Pb, Cd, Ni, and Mn using inductively coupled plasma-mass spectroscopy (ICP-MS). Metal concentrations were then used to assess the human health risks to resident children and adults in central tendency exposure (CTE) and reasonable maximum exposure (RME) scenarios. The concentrations of Pb, Cd, and As were almost twice the threshold values established by the Hong Kong Interim Sediment Quality Guidelines (ISQG). Hg, Cu, and Cr concentrations in sediment were 14, 20, and 26 times higher than the Canadian Freshwater Sediment Guidelines for these elements. Also, the concentrations of Pb, Cu, Cr, and Hg were 3, 11, 12, and 16 times more than the Australian and New Zealand Environment and Conservation Council (ANZECC) sediment guideline values. The results of the human health risk assessment indicate that for ingestion of sediment under the central tendency exposure (CTE) scenario, the cancer risks for child and adult residents from exposure to As were $4.18{\times}10^{-6}$ and $1.84{\times}10^{-7}$, respectively. This suggests that up to 4 children out of one million equally exposed children would contract cancer if exposed continuously to As over 70 years (the assumed lifetime). The hazard index for child residents following exposure to Cr(VI) in the RME scenario was 4.2. This is greater than the United States Environmental Protection Agency (USEPA) threshold of 1, indicating that adverse health effects to children from exposure to Cr(VI) are possible. This study demonstrates the urgent need to control industrial emissions and the severe heavy metal pollution in gold mining environments.

중부지역 과수원 토양중의 중금속 함량 평가 (Assessment on the Content of Heavy Metal in Orchard Soils in Middle Part of Korea)

  • 정구복;김원일;이종식;신중두;김진호;윤순강
    • 한국환경농학회지
    • /
    • 제23권1호
    • /
    • pp.15-21
    • /
    • 2004
  • 우리나라 중부지역에서 1998년 $3{\sim}5$월에 과수원 토양 164지점(경기 48, 강원 36, 충북 36, 충남 44지점)을 대상으로 표토($0{\sim}20\;cm$)와 심토($20{\sim}40\;cm$)로 나누어 채취하여 토양내 중금속함량과 분포특성, 총함량에 대한 침출액별 가용성 함량비율 및 토양 이화학성과의 관계를 비교 검토한 결과는 다음과 같다. 과수원 토양중 0.1N-HCl 침출성 평균함량은 Cd 0.080, Cu 4.23, Fb 3.42 mg/ks 1N-HCl 침출성 As 평균함량은 0.44 mg/kg, 중금속 총함량은 Zn 78.9, Ni 16.09 및 Hg 0.052 mg/kg 이었다. 과수원 토양내 중금속 평균함량은 우리나라 토양환경보전법의 토양오염 우려기준(Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/kg)과 비교하여 $1/2.5{\sim}1/76.9$ 수준으로 안전하였다. 토양의 중금속 총함량에 대한 침출액별 가용성 함량비율은 Cd $5.4{\sim}9.2$, Cu $27.9{\sim}47.8$, Pb $12.6{\sim}21.8$, Zn $15.8{\sim}20.3$, Ni $5.3{\sim}6.3$, Cr $0.7{\sim}3.6%$ 이었고, 특히 0.05 M-EDTA 침출성 Cu 및 Pb의 침출비율이 상대적으로 높게 나타났다. 토양내 Cd, Pb 및 Ni의 총함량은 모래함량과 부의상관, 미사와 점토함량과는 정의 상관을 보였다. 토양의 중금속 총함량에 대한 침출액별 가용성 함량비율은 점토함량과는 부의 상관을 보였으며, Zn과 Ni의 함량비율은 토양 pH값, 유기물 및 유효인산 함량과 정의 상관을 보였다. 이상의 결과에서 볼 때 과수원 토양의 중금속 함량은 토양환경보전법의 토양오염기준보다 매우 낮아 안전하였으나 영농활동에 의한 영향으로 볼 수 있는 농도수준이 검출된 일부 토양에서 조사되었다. 따라서 최근의 친환경농업 측면으로 볼 때 영농형태별 중금속의 분포 및 농업자재에 의한 농경지내 중금속 부하량에 근거하여 중금속 오염유무를 평가할 수 있는 판단기준에 대한 연구가 필요하다고 생각된다.

6가 크롬과 유기탄소와의 반응에 따른 광물학적 지구화학적 변화 (Mineralogical and Geochemical Changes During the Reaction of Cr(VI) with Organic Carbon)

  • 김영규;박영규
    • 한국광물학회지
    • /
    • 제26권3호
    • /
    • pp.151-160
    • /
    • 2013
  • 유기탄소와 Cr(VI)와의 반응을 연구하여 위하여 컬럼 실험을 실시하였다. 컬럼 실험은 거름토의 유기탄소와 수용액 속의 Cr(VI)와의 반응 후 시간별로 채취한 컬럼의 유출수와 반응 후 컬럼에 남은 고체물질에 대하여 화학분석과 SEM 관찰을 실시하였다. 컬럼에 공급된 Cr(VI)은 초기 유출수에서는 검출되지 않다가 약 8 PV (pore volume) 후 급격한 농도 증가를 보이며 공급수의 농도(20 mg/kg)까지 높아져 본 실험 조건에서 초기에 유기탄소와 Cr(VI)과의 반응에 의하여 일정 기간 동안 제거됨을 보인다. 전반적으로 유출수에서 측정된 양이온과 음이온의 농도는 $PO_4$를 제외하고 초기에 증가하였다가 시간이 지나면서 감소하는 경향을 보인다. 대부분의 이온들이 공급수에는 검출되진 않았거나 매우 낮은 농도임을 감안하면 이 이온들은 주로 유기탄소에서 유출된 것으로 판단된다. SEM 관찰결과 Cr은 유기탄소 표면에 Fe와 함께 공침되었음을 보이고 일부 침전물에 Mn, Ni, Co 등과 같은 금속들이 함께 함유되어있음을 보여준다. 이는 유기탄소 표면의 환원환경에서 Cr(VI)가 환원이 되어 $Cr(OH)_3$로 침전되면서 $Fe(OH)_3$와 같이 공침하였음을 보여주며 Fe의 존재가 Cr의 침전에 있어서 매우 중요함을 지시한다. 추후 용해성 Fe와 Mn과 같은 원소들이 더 이상 용출되지 않으면 Cr(VI)는 더 이상 침전 반응으로 제거되지 않는다. 다른 이온들과 달리 $PO_4$의 경우 초기 유출수에서 감소를 보이고 추후에 농도가 증가하는데 이는 유기탄소에 포함되어 있던 $PO_4$가 유출된 후에 Cr과 Fe의 침전물에 효과적으로 흡착이 되고 침전물이 더 이상 생성되지 않게 되면 원래 유기탄소로부터 용해되어 나온 $PO_4$의 농도로 회귀되어 일정한 값을 보이는 것으로 생각된다.