• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.269-273
• /
• 2003

The synthesis and properties of 2,13-bis(3'-pyridylmethyl) $(L^3)$, 2,13-bis(4'-pyridylmethyl) $(L^4)$, and 2,13-bis(phenylmethyl) $(L^5)$ derivatives of 5,16-dimethyl-2,6,13,17-tetraazatrcyclo$[16.4.0.^{1.18}0^{7.12}]$docosane are reported. The 3- or 4-pyridylmethyl groups of $[ML^3](ClO_4)_2\;or\;[ML^4](ClO_4)_2$ (M = Ni(Ⅱ) or Cu(Ⅱ)) are not involved in coordination, and the coordination geometry (square-planar) and ligand field strength of the complexes are quite similar to those of $[ML^5](ClO_4)_2$, bearing two phenylmethyl pendant arms. However, the complex formation reactions of $L^3\;and\;L^4$ are strongly influenced by the pyridyl groups, which can interact with a proton or metal ion outside the macrocyclic ring. The macrocycle $L^5$ exhibits a high copper(Ⅱ) ion selectivity against nickel(Ⅱ) ion; the ligand readily reacts with copper(Ⅱ) ion to form $[CuL^5]^{2+}$ but does not react with hydrated nickel(Ⅱ) ion in methanol solutions. On the other hand, $L^3\;and\;L^4$ form their copper(Ⅱ) and nickel(Ⅱ) complexes under a similar condition, without showing any considerable metal ion selectivity. The ligands $L^3\;and\;L^4$ react with copper(Ⅱ) ion more rapidly than does $L^5$ at pH 6.4. At pH 5.0, however, the reaction rate of the former macrocycles is slower than that of the latter. The effects of the 3- or 4-pyridylmethyl pendant arms on the complex formation reaction of $L^3\;and\;L^4$ are discussed.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1769-1774
• /
• 2004

Jun/Fos, a crucial factor in transmitting the tumor-promoting signal from the extracellular environment to the nuclear transcription machinery, has a dimerization interface possessing several coiled structural properties. Jun and Fos can interact with the DNA regulatory region, AP-1 (Activator Protein-1), which is composed of 5'-TGAC/GTCA-3'.$^1$ Curcumin is a well-known anticancer and anti-inflammatory compound.$^{2,3}$ It also acts as an inhibitor of the Jun-Fos function. c-Fos and c-Jun with a bZIP region are overexpressed in BL21 E. coli and purified with an $Ni^{2+}$ affinity column. The inhibitors of Fos-Jun-AP-1 complex formation were searched through the EMSA (electrophoresis mobility shift assay) experiment, and new curcuminoids were synthesized and investigated as to their inhibitory effect on the same system. Two curcuminoids showed a stronger inhibitory effect than curcumin. This inhibitory activity was quantified with EMSA. 1,7-bis(4-methyl)-1,6-heptadiene-3,5-dione (BJC003) and 1,7-bis(4-hydroxy-5-methoxy-3-nitrophenyl)-1,6-heptadiene-3,5-dione (BJC005) showed remarkably high inhibitory activities. $IC_{50}$ of 1,7-bis(4-methyl)-1,6-heptadiene-3,5-dione (BJC003) and 1,7-bis(4-hydroxy-5-methoxy-3-nitrophenyl)-1,6-heptadiene-3,5-dione (BJC005) are 8.98 ${\mu}M$ and 5.40 ${\mu}M$, respectively. However, 1,7-bis(4-methyl-3-nitrophenyl)-1,6-heptadiene-3,5-dione (BJC004) did not show inhibitory activity.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.108-117
• /
• 2023

Background: When particles are absorbed into the human body, they penetrate deep into the lungs and interact with the tissues of the body. Heavy metals in PM_2.5 can cause various diseases. The main source of PM_2.5 emissions in South Korea's atmosphere has been surveyed to be places of business. Objectives: The concentration of heavy metals in PM_2.5 near the Ulsan Industrial Complex was measured and a health risk assessment was performed for residents near the industrial complex for exposure to heavy metals in PM_2.5. Methods: Concentrations of heavy metals in PM_2.5 were measured at four measurement sites (Ulsan, Mipo, Onsan, Maegok) near the industrial complexes. Heavy metals were analyzed according to the Air Pollution Monitoring Network Installation and Operation Guidelines presented by the National Institute of Environmental Research. Among them, only five substances (Mn, Ni, As, Cd, Cr⁶⁺) were targeted. The risk assessment was conducted on inhalation exposure for five age groups, and the excess cancer risk and hazard quotient were calculated. Results: In the risk assessment of exposure to heavy metals in PM_2.5, As, Cd, and Cr⁶⁺ exceeded the risk tolerance standard of 10^-6 for carcinogenic hazards. The highest hazard levels were observed in Onsan and Mipo industrial complexes. In the case of non-carcinogenic hazards, Mn was identified as exceeding the hazard tolerance of 1, and it showed the highest hazard in the Ulsan Industrial Complex. Conclusions: This study presented a detailed health risk from exposure to heavy metals in PM_2.5 by industrial complexes located in Ulsan among five age groups. It is expected to be utilized as the basis for preparing damage control and industrial emission reduction measures against PM_2.5 exposure at the Ulsan Industrial Complex.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.111-111
• /
• 2012

In this talk, we represent a novel approach to investigating intra-nanorod surface plasmon coupling with control over block compositions. The multi-component rod-like nanostructures, which consist of optically active components (Au and Ag) and optically less active component (for example, Ni) in UV-vis-NIR spectral window, showed interesting optical response depending on each block length and the total length of the structure. By controlling the composition and relative lengths of the blocks that comprise these structures, we can tailor the overall optical properties. Depending on the relative fraction of Au and Ag blocks, the intensity of the transverse modes varied without noticeable peak shifts. However, the strong intraparticle surface plasmon coupling resulted in the collective appearance of longitudinal LSP modes, including higher-order modes. The experimental observations were confirmed by theoretical calculation, using a discrete dipole approximation method. In addition, we will briefly discuss how single nanorod solar cells can be synthesized by using by using electrochemical deposition and AAO hard templates.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.5-8
• /
• 2008

SOFC (Solid oxide fuel cell) has an advantage in the term of fuel flexibility, comparing with other kinds of fuel cells. In SOFC and fuel reformer cooperation system, the reformate gas with the various $H_2$/CO ratios is delivered into the anode of SOFC. In this situation, electrochemical oxidation reactions of the reformate gas in the anode are complex and competitive. In this paper, the effects of the composition of $H_2$ and CO on the overall electrochemical oxidation at Ni-YSZ anode are studied by testing the open circuit voltage (OCV) and current-voltage characteristics of single cells.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.2
• /
• pp.16-22
• /
• 2010

This paper proposes the real-time moving object tracking system UAV using color information. Case of object tracking, it have studied to recognizing the moving object or moving multiple objects on the fixed camera. And it has recognized the object in the complex background environment. But, this paper implements the moving object tracking system using the pan/tilt function of the camera after the object's region extraction. To do this tracking system, firstly, it detects the moving object of RGB/HSI color model and obtains the object coordination in acquired image using the compact boundary box. Secondly, the camera origin coordination aligns to object's top&left coordination in compact boundary box. And it tracks the moving object using the pan/tilt function of camera. It is implemented by the Labview 8.6 and NI Vision Builder AI of National Instrument co. It shows the good performance of camera trace in laboratory environment.

• Journal of ILASS-Korea
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2011

The present study conducted computational simulation for multiphase flow in the flame spray coating process with commercially available Ni-Cr powders. The flows in a flame spray gun is characterized by very complex phenomena including combustion, turbulent flows, and convective and radiative heat transfer. In this study, we used a commercial computational fluid dynamics (CFD) code of Fluent (ver. 6.3.26) to predict gas dynamics involving combustion, gas and particle temperature distributions, and multi-dimensional particle trajectories with the use of the discrete phase model (DPM). We also examined the effect of particle size on the flame spray process. It was found that particle velocity and gas temperature decreased rapidly in the radial direction, and they were substantially affected by the particle size.

• Journal of Korea Foundry Society
• /
• v.31 no.6
• /
• pp.366-370
• /
• 2011

The influence of aging treatment on the microstructure, mechanical and electrical properties of Cu-Be alloy for connector material applications was investigated. The properties of mechanical strength and electrical conductivity were found to increase with increasing aging temperature. By the way, SEM/EDS and TEM analysis exhibited that beryllides precipitation (CoBe and NiBe) with a size of 50 nm were distributed in grains. It was, therefore concluded that these beryllide precipitates improved the mechanical strength and also it was favor in increasing of electrical conductivity.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.83-84
• /
• 2008

A highly selective colorimetric chemosensor for $Hg^{2+}$ based on the semisquaraine(BSQ) containing benzothiazole moiety was investigated. BSQ showed color change only with $Hg^{2+}$ but it showed no significant changes upon addition of other metal ions such as $Ca^{2+},\;Pb^{2+},\;Al^{3+},\;Ce^{2+},\;Ba^{2+},\;Ni^{2+},\;Cd^{2+},\;Zn^{2+},\;and\;Mg^{2+}$. $Hg^{2+}$ ions coordinated to the BSQ forming 1:1 complex. The experimental data and conclusions are rationalized by $DMol^3$ calculation results.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.162-163
• /
• 2009

Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environmental monitoring. In this study, 10 new direct dyes were synthesized to be used as colorimetric chemosensor. When metal ions such as $Al^{3+},\;Ca^{2+},\;Cd^{2+},\;Cr^{3+},\;Cu^{2+},\;Fe^{2+},\;Fe^{3+},\;Hg{^2+},\;Li^+,\;Mg^{2+},\;Na^+,\;Ni^{2+},\;Pb^{2+}\;and\;Zn^{2+}$ were added to the solutions of new dyes, the colors of the solutions were changed and can be easily detected by eyes without any expensive equipments. Some metal ions were coordinated to the new direct dyes forming complex. The experimental data and conclusions were rationalized by UV-VIS spectroscopy.