• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.267-267
• /
• 2012

$TiO_2$-Ni inverse catalysts were prepared using atomic layer deposition (ALD) process and catalytic $CO_2$ reforming of methane (CRM) reaction over catalysts (either bare Ni or $TiO_2$ coated-Ni particles) were performed using a continuous flow reactor at $800^{\circ}C$. $TiO_2$-Ni inverse catalyst showed higher catalytic reactivity at initial stage of CRM reactions at $800^{\circ}C$ comparing to bare Ni catalysts. Moreover, catalytic activity of $TiO_2$/Ni catalyst was kept high during 13 hrs of the CRM reactions at $800^{\circ}C$, whereas deactivation of bare Ni surface was started within 1hr under same conditions. The results of surface analysis using SEM, XPS, and Raman showed that deposition of graphitic carbon was effectively suppressed in a presence of $TiO_2$ nanoparticles on Ni surface, thereby improving catalytic reactivity and stability of $TiO_2$/Ni catalytic systems. We suggest that utilizing decoration effect of metal catalyst with oxide nanoaprticles is of great potential to develop metal-based catalysts with high stability and reactivity.

• 청정기술
• /
• 제23권2호
• /
• pp.213-220
• /
• 2017

HY 제올라이트에 담지된 Ni 촉매 및 Mg, Ca, K 그리고 Mn 등이 조촉매로 함께 담지된 Ni/HY 촉매상에서 메탄의 건식 개질 반응을 수행하였다. 촉매는 초기 함침법으로 제조하였으며 제조된 촉매는 XRD, BET, SEM 및 TGA 분석을 통하여 반응 전후 의 촉매 변화를 고찰하였다. Ni의 담지량이 증가함에 따라 메탄의 전환율 및 생성물의 수율이 증가하였으며 Ni의 담지량이 13 wt% 일 때 메탄의 전환율이 최대를 나타내었다. Mg를 조촉매로 함께 담지하였을 때 촉매의 탄소에 대한 저항성이 크게 증가하였으며 이에 따라 촉매의 장기 안정성이 크게 향상되었다. 이는 조촉매로 담지된 Mg가 Ni의 입자 크기를 작게 하여 Ni의 분산도를 향상시키고 촉매의 비활성화를 방지하기 때문인 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.658-664
• /
• 2020

Zeolite HY is wet impregnated with Ni (0.1, 0.3, 0.4, 0.5 wt%), Pt (0.1 wt%) and reduced in presence of hydrogen to form nanosized particles of Ni and Pt. All the catalysts were characterized by XRD, TEM, ESCA, NH₃-TPD, Pyridine adsorbed FT-IR and BET. Characterization results confirm that the Ni and Pt fractions effectively rehabilitated the physio-chemical properties of the zeolite HY catalysts. Further, all the reduced catalyst were screened with hydroisomerization of m-xylene at LHSV = 2.0 h^-1 in the temperature range 250-400 ℃ in steps of 50 ℃ in hydrogen atmosphere (20 ml/g). The addition of Ni to Pt catalyst increases hydroisomerization conversion, as well as maximizes p-xylene selectivity by restricting the pore size. The increasing trend in activity continues up to 0.3 wt% of Ni and 0.1 wt% Pt addition over zeolite HY. The increasing addition of Ni increases the total number of active metallic sites to exposed, which increases the metallic sites/acid sites ratio towards the optimum value for these reactions by better balance of synergic effect for stable activity. The rate of deactivation is pronounced on monometallic catalysts. The results confirm the threshold Ni addition is highly suitable for hydroisomerization reaction for product selectivity over Ni-Pt bimetallic/support catalysts.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.110-117
• /
• 2015

10 wt% (Ni-Co) catalysts with different Ni and Co content : 10%Ni, 9%Ni1%Co, 7%Ni3%Co, 5%Ni5%Co, 3%Ni7%Co, and 10%Co; were prepared using sol-gel method followed by incipient wetness impregnation method. To investigate the catalytic activity including the stability, dry methane reforming were demonstrated over the pelletized catalysts at $620^{\circ}C$ under atmospheric pressure in a $CH_4:CO_2:N_2$ feedstock for 360 min. The results showed that bimetallic catalysts with the Co content equal to or greater than 3% were more stable than monometallic catalysts (10%Ni and 10%Co). The temperature programmed hydrogenation interpreted that the additional of Co into Ni catalyst improved the carbon resistance from methane cracking. Promoted this type of bimetallic catalyst using 1wt% K (trimetallic catalyst) prevented the carbon formation on the catalyst. The temperature programmed desorption of $CO_2$ indicated that this trimetallic catalyst has a greater number of strong basic sites. Moreover, the appearance of K lowered the number of weak basic sites and decreased the conversion of methane by 12 %.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.387-391
• /
• 2019

A highly porous Ni@MIL-101catalyst for urea oxidation was synthesized by anchoring Ni into a Cr-based metal-organic framework, MIL-101, particles. The morphology, structure, and composition of as synthesized Ni@MIL-101 catalysts were characterized by X-Ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The electro-catalytic activity of the Ni@MIL-101catalysts towards urea oxidation was investigated using cyclic voltammetry. It was found that the structure of Ni@MIL-101 retained that of the parent MIL-101, featuring a high BET surface area of $916m^2g^{-1}$, and thus excellent electro-catalytic activity for urea oxidation. A $urea/H_2O_2$ fuel cell with Ni@MIL-101 as anode material exhibited an excellent performance with maximum power density of $8.7mWcm^{-2}$ with an open circuit voltage of 0.7 V. Thus, this work shows that the highly porous three-dimensional Ni@MIL-101 catalysts can be used for urea oxidation and as an efficient anode material for urea fuel cells.

• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.29-36
• /
• 2010

The effects of La addition to Ni/$CeO_2$ methane partial oxidation catalysts were investigated. Catalysts were prepared by the impregnation and urea methods. In the preparation of catalysts, La content was changed from 1 wt% to 3wt%. Catalysts that contain 2wt% La showed the highest methane conversion of about 80% and CO selectivity of 84% and $H_2$ selectivity of 70%. This result may be stemmed from that, when La content is 2wt%, a fluorite oxide-type structure is well formed and carbon deposition is also decreased. Among the catalysts, 2.5wt% Ni/Ce(La)Ox showed the highest catalytic activity. From the experiment of changing reaction temperature with 2.5wt% Ni/Ce(La)Ox catalyst, it was found that the optimum reaction temperature is $750^{\circ}C$ and at this temperature methane conversion was about 90%, CO and $H_2$ selectivities were 94 and 80%, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.97.2-97.2
• /
• 2011

Pt-Ru and Pt-Ni bimetallic catalysts were prepared and tested for heavy hydrocarbon reforming. Metals were supported on CGO($Ce_{0.8}Gd_{0.2}O_{2.0-x}$) by incipient wetness method. The prepared catalysts were characterized by Temperature programmed reduction(TPR). Oxidative steam reforming of n-dodecane was conducted to compare the activity of the catalysts. The reforming temperature was varied from $500^{\circ}C$ to $800^{\circ}C$ at fixed $O_2$/C of 0.3, $H_2O$/C of 3.0 and GHSV of 5,000/h.Reduction peaks of metal oxide, surface CGO and bulk CGO were detected. Reduction temperature of metal oxide decreased over the bi-metallic catalysts. It is considered that interaction between metals leads to decrease interaction between metal and oxygen. On the other hands, reduction temperatures of surface CGO were dectected in the order of Pt-Ru > Pt-Ni > Pt. low reduction temperatures of surface CGO indicates the low activation energy for oxygen ion conduction to metal. Oxygen ion conduction is known as de-coking mechanism of ionic conducting supports such as CGO. In activity test, fuel conversion was in the same order of Pt-Ru > Pt-Ni > Pt. Especially, 100% of fuel conversion was obtained over Pt-Ru catalysts at $500^{\circ}C$.

• 한국가스학회지
• /
• 제11권2호통권35호
• /
• pp.25-30
• /
• 2007

아세트알데히드 분해반응을 위한 촉매에 대하여 연구하였다. 촉매는 지지체 ${\gamma}-Al_2O_3$와 전이 금속 Ni, Mo, Al을 이용하여 담지법으로 제조하였으며, 촉매의 물리 화학적 성질은 SEM-EDS, XRD, XPS, BET 및 TPR 기법으로 조사하였다. 촉매의 아세트알데히드 전환효율은 $150{\sim}500^{\circ}C$온도 범위에서 마이크로 반응시스템을 통하여 GC로 측정하였으며, 8 wt% $Ni/{\gamma}-Al_2O_3$가 단일금속 촉매에서 전환효율이 가장 큰 촉매로 나타났다. 1-3 wt% $Ni-Al/{\gamma}-Al_2O_3$는 다른 이금속 촉매보다 높은 전환효율을 가지는 것으로 측정되었다.

• 신재생에너지
• /
• 제4권4호
• /
• pp.80-87
• /
• 2008

Steam reforming of LPG was investigated over spc-Ni/MgAl catalyst in a temperature range of $600{\sim}850^{\circ}C$, feed molar ratio of $H_2O/C=1.0{\sim}3.0$, space velocity of $10,000{\sim}90,000h^{-1}$ and at atmospheric pressure. spc-Ni/MgAl catalyst was prepared by a co-precipitation method, whereas Ni/MgO and $Ni/Al_2O_3$ catalysts were prepared by an incipient wetness method. The characteristics of catalysts were analyzed by N2 Physisorption, CO chemisorption, XRD, TOF-SIMS, SEM and TEM techniques. The Ni/MgO and $Ni/Al_2O_3$ catalysts were deactivated by the formation of carbon. However, the spc-Ni/MgAl catalyst showed higher conversion and $H_2$ selectivity than the other catalysts, even though carbon was formed on the surface of the catalyst during the reaction under the tested reaction conditions.

• 청정기술
• /
• 제27권1호
• /
• pp.69-78
• /
• 2021

팜유(palm oil)와 캐슈넛 껍질액(cashew nut shell liquid, CNSL)과 같은 식물유는 한국에서 수송용 바이오-디젤 혹은 발전용 바이오-중유의 주요 원료로서 사용되고 있다. 그러나, 이들은 탄화수소의 이중결합에 의한 높은 불포화도와 더불어 카르복실산에 기인한 높은 산소의 함량으로 인하여 연료유로서의 적용 범위에 한계가 있다. 이러한 관점에서, 본 연구는 팜유와 CNSL이 1/1 v/v%으로 이루어진 혼합 바이오오일에 포함된 불포화탄화수소를 포화시키고 산소 성분을 제거하기 위한 수소화처리 반응을 단일금속촉매(Ni과 Cu)와 이원금속촉매(Ni-Zn, Ni-Fe, Ni-Cu Ni-Co, Ni-Pd와 Ni-Pt) 들을 적용하여 완화된 반응조건(온도 250 ~ 400 ℃, 압력 5 ~ 80 bar와 LHSV 1 h-1) 하에서 수행하였다. Ni 활성성분에 대한 귀금속과 전이금속의 첨가는 수소화반응(HYD)과 탈산소반응(HDO)의 두 반응에 대한 활성을 증가시키는 시너지 효과를 보였다. 가장 활성이 뛰어난 유망한 촉매는 Ni-Cu/��-Al2O3으로서 Ni/Cu의 원소비가 9/1 ~ 1/4의 넓은 범위에서 HYD반응과 HDO반응에 대한 전환율이 각각 90 ~ 93%와 95 ~ 99%을 보였다. 이와 같이 Ni/Cu의 원소 비율이 넓은 범위에서 일정한 촉매반응활성을 보임에 따라 전형적인 구조비민감성 반응임을 알 수 있다. 그리고, 수소화처리 반응에 의해 정제된 혼합 바이오오일은 원료 혼합 바이오오일에 비해 요오드가, 산가 및 동점도가 크게 낮아졌으며, 고위발열량은 약 10% 증가되었다.