• ETRI Journal
• /
• v.25 no.4
• /
• pp.270-273
• /
• 2003

This paper presents a simple process to integrate thin-film inductors with a bottom NiFe magnetic core. NiFe thin films with a thickness of 2 to 3${\mu}m$ were deposited by sputtering. A polyimide buffer layer and shadow mask were used to relax the stress of the NiFe films. The fabricated double spiral thin-film inductor showed an inductance of 0.49${\mu}H$ and a Q factor of 4.8 at 8 MHz. The DC-DC converter with the monolithically integrated thin-film inductor showed comparable performances to those with sandwiched magnetic layers. We simplified the integration process by eliminating the planarization process for the top magnetic core. The efficiency of the DC-DC converter with the monolithic thin-film inductor was 72% when the input voltage and output voltage were 3.5 V and 6 V, respectively, at an operating frequency of 8 MHz.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.64-65
• /
• 2002

Recently the synthetic antiferromagnetic layer (SAF) has received much attention because it replaces the pinned layer of the conventional spin valve (CSV) sensors and its overall performance [1], The spin valve (SV) with SAF has the from buffer/F/Cu/APl/Ru/AP2/AF, where F is the soft ferromagnetic layer (typically NiFe with CoFe interfacial doping), AP1 and AP2 are two ferromagnetic layers (typically CoFe alloys) antiferromagnetically coupled through a thin Ru layer. (omitted)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.14-19
• /
• 2011

We have fabricated GaN Schottky barrier diode (SBD) for high-voltage applications on Si substrate. The leakage current and the electrical characteristics of GaN SBD are investigated by annealing metal-semiconductor junctions. Ohmic junctions of Ti/Al/Mo/Au and Schottky junctions of Ni/Au are used in the fabrication. A test structure is proposed to measured buffer leakage current through a mesa structure. When annealing temperature is increased from $700^{\circ}C$ to $800^{\circ}C$, measured buffer leakage current is also increased from 87 nA to 780 nA at the width of 100 ${\mu}m$. The diffusion of Au, Ti, Mo, O into GaN buffer layer increases the leakage current and that is verified by Auger electron spectroscopy. Experimental results show that the low leakage current and the high breakdown voltage of GaN SBD are achieved by annealing metal-semiconductor junctions.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.11-14
• /
• 2003

The detailed conditions of dc-sputtering for depositions of yttria-stabilized ZrO$_2$ (YSZ) films were investigated, while the films were grown on the CeO$_2$ template layers on biaxially textured Ni-tapes. The window of oxygen pressures for proper growth of YSZ films, which was dependent on sputtering powers, was determined by sufficient oxidations of the YSZ films and the de-oxidation of the target surface, which was required for rapid sputtering. The window turned out to be fairly wide under certain values of argon pressure. When the sputtering power was raised, the deposition rate increased without narrowing the window. The fabricated YSZ films showed good texture qualities and surface morphologies.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.51-55
• /
• 2003

SrTiO₃ (STO) thin fims were deposited on the biaxially textured Ni-3 wt%W alloy substrates to be used as a single buffer layer for YBa₂CU₃O/sub 7-8/(YBCO) coated conductor. Thin films of YBCO and STO were deposited using pulsed laser. The deposition condition for epitaxial growth of STO on the textured metal was identified, and YBCO coated conductor with a single STO buffer layer with critical current density of 1.2 MA㎠ at 77 K under zero magnetic field and critical temperature of 86 K, was fabricated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.22-23
• /
• 2005

In order to increase the critical current of coated conductor, highly Bi-axially textured substrates are required. Texture uniformity of substrate is also important to fabricate high quality superconducting coated conductor because the amount of current flow along the coated conductor is limited by the defects such as bad textured area. Therefore, we need to evaluate the distribution of texture of Ni substrate along the length before buffer layer deposition on Ni tape. R2R(reel-to-reel) XRD system was used to measure the texture of long Ni substrate continuously. $\theta-2\theta$ scan of 10 m long Ni tape was measured and indicates that some of Ni(111) planes equally remain on Ni(002) textured substrate. The results of continuous Ni(220) $\Phi$-scan indicate that average FWHM is 9$^{\circ}$ within $\pm$1.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1440-1441
• /
• 2006

In this study, we synthesized CNTs(carbon nanotubes) on the glass substrate by microwave plasma enhanced chemical vapor deposition (MPECVD), Effect of bias voltage on the grown behavior and morphology of CNTs were investigated. Recently, it has been proposed that aligned CNTs can also be achieved by the application of electric bias to the substrate during growth, the first time reported the bias effect such that the nanotube alignment occurred only when a positive bias was applied to the substrate whereas no aligned growth occurred under a negative bias and no tube growth was observed without bias. On the country, several researchers reported some different observations that aligned nanotubes could also be grown under negative substrate biases. This discrepancy as for the effect of positive and negative bias may indicate that the bias effect is not fully understood yet. The glass and Si wafers were first deposited with TiN buffer layer by r.f sputtering method, and then Ni catalyst same method, The thickness of TiN and Ni layer were 200 nm and 60 nm, respectively. The main process parameters include the substrate bias (0 to - 300 V), and deposition pressure (8 to 20 torr).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1271-1272
• /
• 2007

Experimental results regarding to the structural properties of carbon nanotubes (CNTs) and the field-emission characteristics of CNT-coated tungsten (W) tips are presented. CNTs are successfully grown on conical-type W-tips by inductively coupled plasma-chemical vapor deposition (ICP-CVD) with or without inserting a TiN-buffer layer prior to the formation of Ni catalysts. For all the CNTs grown, their nanostructures, morphologies, and crystalline structures are analyzed by FESEM, HRTEM, and Raman spectroscopy. Furthermore, the emission properties of CNT-based field-emitters are characterized to estimate the maximum current density and the threshold voltage. The results obtained in this study indicate that the emission current level of the CNT-emitter without using a TiN buffer is desirable for the application of micro-focused x-ray systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.133.2-133.2
• /
• 2016

차세대 디스플레이로 유연하고 투명한 기능들이 요구되면서 Indium Tin Oxide(ITO)를 대체하기 위한 투명전극 개발 연구가 많이 수행되고 있다. ITO는 높은 투과도와 낮은 저항으로 현재 가장 많이 활용되고 있는 투명전극 소재이지만 유연성이 떨어져 유연 터치 패널 소재로 활용하기 어렵다. 이러한 문제 해결을 위해 ITO 대체 물질로 CNT, Graphene, Metal mesh, Ag nano wire, 전도성 고분자 등의 차세대 투명 전극 소재가 대두되고 있다. 본 연구에서는 메탈 메쉬 전극 소재로 사용하기 위해 Cu 박막 증착 시 플라즈마 표면처리를 통해 밀착력 및 저항을 개선하였다. Cu 금속 박막의 양산화를 위한 공정으로 자체 제작한 Linear Ion Source(LIS)가 부착된 roll to roll 시스템을 적용하여 플라즈마 전처리 공정 및 Ni buffer layer 도입 이후 Cu 박막을 형성하였다. 그 결과 PET 기판과 Cu 박막 사이의 밀착력을 0 degree에서 5 degree까지 향상시킬 수 있었고, 플라즈마 표면처리를 시행함으로써 저항 또한 감소되는 결과를 얻을 수 있었다. 본 연구를 통해서 폴리머 기판 소재에 in-situ로 표면처리 및 Cu 금속 박막을 증착함으로써 금속 박막의 밀착력 및 전기적 특성이 향상되는 공정 기술을 개발하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.150-150
• /
• 2003

wide bind gap과 wurtzite hexagonal structure를 가지고 있으며 청색 발광 및 청자색 레이저 특성을 보이는 III-V족 화합물반도체 GaN는 laser diodes (LD) 및 light emitting diodes (LED) 재료로 주목받고있는 주요 전자재료이다. 본 연구에서는 GaN를 chemical vapor deposition (CVD) 법을 이용하여 vapor-liquid-solid (VLS) mechanisum에 의하여 GaN나노와이어 형태로 성장시켰다. 기판은 (001)Si을 사용하였고 suputtering을 이용하여 GaN와 AlN의 double buffer layer (DBL)를 증착시켰으며 촉매로는 Ni을 사용하였다. 또한, 원료로는 고순도 Ga금속과 NH$_3$ gas를, carrier gas로는 Ar을 사용하여 GaN/AlN/(001)Si 위에 GaN 나노와이어를 성장시켰다. 성장된 GaN 나노와이어는 DBL의 두께, Ga source의 양, 튜브 안의 압력, 튜브 안의 위치 등의 제 공정변수에 따라 tangled, straight 등의 다양한 형상을 보였으며 지름은 약 30~100 nm, 길이는 수 $\mu\textrm{m}$로 관찰되었다. GaN나노와이어의 결정성, 형상 및 발광특성 등을 x-ray diffraction (XRD), photoluminesence (PL), scanning electron microscope (SEM), transmision electron microscope (TEM) 등을 이용하여 측정하였으며 제 공정변수와의 상관관계를 규명하였다.