• 한국재료학회지
• /
• 제19권3호
• /
• pp.119-124
• /
• 2009

In the microelectronics packaging industry, the adhesion strength between Cu and polyimide and the thermal stability are very important factors, as they influence the performance and reliability of the device. The three different buffer layers of Cr, 50%Cr-50%Ni, and Ni were adopted in a Cu/buffer layer/polyimide system and compared in terms of their adhesion strength and thermal stability at a temperature of $300^{\circ}C$ for 24hrs. A 90-degree peel test and XPS analysis revealed that both the peel strength and thermal stability decreased in the order of the Cr, 50%Cr-50%Ni and Ni buffer layer. The XPS analysis revealed that Cu can diffuse through the thin Ni buffer layer ($200{\AA}$), resulting in a decrease in the adhesion strength when the Cu/buffer layer/polyimide multilayer is heat-treated at a temperature of $300^{\circ}C$ for 24hrs. In contrast, Cu did not diffuse through the Cr buffer layer under the same heat-treatment conditions.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.36-41
• /
• 2000

본 실험에서는 D.C magnetron sputtering을 사용하여 Ni-Fe/Co-Fe/Mn-Ir/Cu/buffer/Si 다층박막의 교환이방성에 관하여 연구하였다. 일반적인 Ni-Fe/Mn-Ir/buffer(Cu)/Si의 다층박막 구조는 낮은 교환결합 자계에 의하여 강자성체를 완전히 고착시키지 못한다. 따라서 Ni-Fe/Mn-Ir/buffer/Si 다층박막의 $H_{ex}$를 증가시키기 위해 하지층으로 Cu/Ta을 사용하여 Mn-Ir막의 결정립 부피를 증가시키고 Ni-Fe.Mn-Ir계면에 Co-Fe을 삽입하여 반강자성체/강자성체 계면에서의 epitaxy 경향을 향상시켜 2배 이상의 $H_{ex}$의 증가를 얻을 수 있었다. 또한 ferromagnete/Mn-Ir/buffer/Si의 다층박막 구조에서는 Mn-Ir거 두께에 따른 He일 변화 거동은 Mn-Ir/ferromagnete/buffer/Si다층박막구조와는 다른데 이와 같은 이유는 적층순서에 따라서 반강자성체 결정립의 부피분포와 계면에서의 교환결합 에너지가 차이가 나기 때문인 것으로 사료된다.

• 한국자기학회지
• /
• 제12권4호
• /
• pp.132-136
• /
• 2002

유리기관 위에 이온 빔 증착(ion beam deposition ; IBD)법으로 제작한 버퍼층(buffer layer) Si의 두께에 따른 ［NiFe/FeMn/NiFe］3층박막의 결정성과 교환결합세기(exchange bias field ; H$_{ex}$)를 조사하였다. 버퍼층 Si는 NiFe층을 fcc(111)로 매우 우세하게 초기에 결정성장 시켰다. Si/NiFe 위의 증착된 FeMn층은 ${\gamma}$-fcc(111)구조로 성장함에 따라 안정되고 큰 H$_{ex}$를 가졌고, 버퍼 110 Oe로 거의 일정하였으며, 상부 FeMn/NiFe 이중구조의 H$_{ex}$는 300 Oe까지 증가하였다. 버퍼층이 Ta일 경우와 비교해서 Si일 때 H$_{ex}$와 결정성이 향상되었다.이 향상되었다.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.381-387
• /
• 2000

Si3N4/stainless steel 316 joints with Ni buffer layer were fabricated by direct active brazing method (DIB) using Ag-Cu-Ti brazing alloy only and double brazing method (DOB) using Ag-Cu brazing alloy with Si3N4 pretreated with Ag-Cu-Ti brazing alloy. For the joint brazed by DIB method, Ti was segregated at the Si3N4/brazing alloy interface, but was not enough to form a stable joint interface. In addition, large amounts of Ni-Ti inter-metallic compounds were formed in tehbrazing alloy near the joint interface, which could deplete the contents of Ti involved in the interfacial reaction. However, for the joint brazed by DOB method, segregation of Ti at the joint interface were enough to enhance the formation of stable interfacial reaction products such as TiN and Ti-Si-Ni-N-(Cu) multicompounds, which restricted the formation of Ni-Tio inter-metallic compounds in the brazing alloy during brazing with Ni buffer layer. Fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was much improved by using DOB method rather than DIB method. It could be deduced that the differences of fracture strength of the joint with Ni buffer layer depending on brazing process adapted were directly affected by the formation of stable joint interface and the change in microstructure of the brazing alloy near the joint interface. It was found that fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was gradually reduced as the thickness of interface. It was found that fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was gradually reduced as the thickness of Ni buffer layer in the joint was increased from 0.1 mm to 10 mm. It seems to due to the increased residual stress in the joint as the thickness of Ni buffer layer is increased. The maximum fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was 386 MPa, and the fracture of joint was originated at Si3N4/brazing alloy joint interface and propagated into Si3N4 matrix.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.486-492
• /
• 1999

본 실험에서는 D.C magnetron sputtering을 사용하여 Mn-Ir/Ni-Fe/buffer/Si 다층박막의 교환결합 자계와 보자력에 영향을 주는 인자를 미세구조의 관점에서 분석하였다. (111) 우선방위에 상관없이 모든 시편에서 155 Oe 이상의 교환결합 자계가 발생하였다. Mn-Ir/Ni-Fe 의 계면에서 Mn-Ir의 결정립 크기와 게면 거칠기가 Mn-Ir/Ni-Fe 다층박막의 교환결합 자계와 보자력에 가장 많은 영향을 주는 것을 알 수 있었다. Mn-Ir/Ni-Fe/Cu/Ni-Fe/buffer/Si spin-valve 다층박막에서 각 층의 두께와 하지층에 따른 자기저항비와 coulping field을 분석하였다. Mn-Ir(10 nm)/Ni-Fe(7.5 nm)/Cu(2 nm)Ni-Fe(6 nm)/Ta (5 nm)/Si에서 최대 자기저항비가 발생하였다. 강자성체의 결정립 크기가 거대자기저항비에 영향을 주는 것을 알 수 있었다. 그리고 계면 거칠기와 강자성체의 결정립 크기가 coulping field 에 많은 영향을 주는 것을 알 수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.306-307
• /
• 2015

유기태양전지의 대표적 Hole Transporting Layer(HTL)로는 전도성 고분자인 PEDOT:PSS이다. PEDOT:PSS는 약산성의 물질로 전극을 부식시켜 디바이스의 효율을 감소시키기 때문에 PEDOT:PSS를 대체하기 위한 Buffer층에 대한 연구가 활발히 진행되어지고 있다. PEDOT:PSS를 대체할 수 있는 Nickel Oxide(NiO) Buffer 층은 wide band-gab으로 Hole Transporting Layer와 Electron Blocking Layer 역할을 동시에 하여 디바이스의 효율을 향상시킬 수 있으며, 디바이스의 수명을 향상시킬 수 있다는 장점이 있다. NiO는 용액공정과 Sputter 증착 방법으로 형성할 수 있는데, 용액공정은 고온공정이 요구되어지고 Sputter 증착방법은 산화되기 쉬운 전극위에서는 전극의 손상을 발생한다. 본 연구에서는 이러한 단점을 해결하기 위해서 Ni을 Magnetron Sputter로 증착한 후 Ion Beam 처리를 통해 산화시켜 NiO 층을 형성하는 방법을 연구하였다. 본 연구에서 제안한 NiO형성 방법으로 유기태양전지를 제작하여 PEDOT:PSS를 Buffer층으로 사용한 태양전지와 Voc가 0.72 V로 유사하게 나와 NiO가 Buffer층으로 잘 형성된 것을 확인하였다.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.130-134
• /
• 2006

Buffer layers such as $CeO_2\;and\;Yb_2O_3$ films for YBCO coated conductors were deposited on (100) $SrTiO_3$ single crystals and (100) textured Ni substrates by a metal organic chemical vapor deposition (MOCVD) system of the hot-wall type. The substrates were moved with the velocity of 40 cm/hr. Source flow rate, $Ar/O_2$ flow rate and deposition temperature were main processing variables. The degree of film epitaxy and surface morphology were investigated using XRD and SEM, respectively. On a STO substrate, the $CeO_2$ film was well grown epitaxially above the deposition temperature of $450^{\circ}C$. However, on a Ni substrate, the XRD showed NiO (111) and (200) peaks due to Ni oxidation as well as (111) and (200) film growth. For the films deposited with $O_2$ gas as oxygen source, it was found that the NiO film was formed at the interface between the buffer layer and the Ni substrate. The NiO layer interrupts the epitaxial growth of the buffer layer. It seems that the epitaxial growth of the buffer layer on Ni metal substrates using $O_2$ gas is difficult. We are considering a new method avoiding Ni oxidation with $H_2O$ vapor instead of $O_2$ gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.111-118
• /
• 2002

A new lithium niobate optical modulator with a polymer buffer layer on Ni in-diffused optical waveguide is proposed for the fist time, successfully fabricated and examined at a wavelength of 1.3 mm. By determining the diffusion parameters of Ni in-diffused waveguide to achieve more desirable mode size which is well matched to the mode in the fiber, the detailed results on the achievement of high optical throughput are reported. In addition, the usefulness of polymer buffer layer which can be applicable to a buffer layer in Ni in-diffused waveguide devices is demonstrated. Several sets of channel waveguides fabricated on Z-cut lithium niobate by Ni in-diffusion were obtained and on which coplanar traveling-wave type electrodes with a polymer-employed buffer layer were developed by a conventional fabrication method for characterizing of electro-optical performances of the proposed device. The experimental results show that the measured half-wave voltage is of ~10 V and the total measured fiber-to-fiber insertion loss is of ~6.4 dB for a 40 mm long at a wavelength of =1.3 mm, respectively. From the experimental results, it is confirmed that the polymer-employed buffer layer in LiNbO3 optical modulator can be a substitute material instead of silicon oxide layer which is usually processed at a high temperature of over $300^{\circ}C$. Moreover, the fabrication tolerances by using polymer materials in LiNbO3 optical modulators are much less strict in comparison to the case of dielectric buffer layer.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.100-101
• /
• 1995

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.8-11
• /
• 2006

High temperature superconducting coated conductor has various buffer structures on Ni-W alloy. We comparatively studied the growth conditions of a multi buffer layer $(CeO_2/YSZ/CeO_2)$ and a single buffer layer$(CeO_2)$ on textured Ni-W alloy tapes. XRD data showed that the qualities of in-plane and out-of-plane textures of the two type buffer structures were good. Also, we investigated the properties of SmBCO superconducting layer that was deposited on the two type buffer structure. The SmBCO superconducting properties on the single and multi buffer structure showed different critical current values and surface morphologies. FWHM of In-plane and out-of-plane textures were $7.4^{\circ},\;5.0^{\circ}$ in the top CeO2 layer of the multi-buffer layers of $CeO_2/YSZ/CeO_2$, and $7.3^{\circ},\;5.1^{\circ}$ in the $CeO_2$ single buffer layer. $1{\mu}m-thick$ SmBCO superconducting layers were deposited on two type buffer layer. $I_c$ of SmBCO deposited on single and multi buffer were 90 A/cm, 150 A/cm and corresponding $J_c$ were $0.9MA/cm^2,\;1.5MA/cm^2$ at 77K in self-field, respectively.