• 한국분말재료학회지
• /
• 제4권3호
• /
• pp.205-213
• /
• 1997

Mechanical alloying of $Ni_3Al$ and $Y_2O_3$ added ODS $Ni_3Al$ from elemental powders was investigated by the X-ray diffraction, differential scanning calorimeter, transmission electron microscopy and optical microscopy. The steady states of $Ni_3Al$ and ODS $Ni_3Al$ powders were reached after mechanical alloying with the condition of the ball-to-powder input ratio of 20:1 for 20 hours and 10 hours, respectively. The addition of nano-sized $Y_2O_3$ particles enhanced cold working and fracture, and subsequently accelerated MA of $Ni_3Al$ powders. DSC results of MAed $Ni_3Al$ powders showed four exothermic peaks at 14$0^{\circ}C$, 234$^{\circ}C$, 337$^{\circ}C$ and 385$^{\circ}C$. From the high temperature X-ray diffraction analysis, it was concluded that the peaks were resulted from the recovery solution of unalloyed Al in Ni, the formation of intermediate phase NiAl, and $LI_2$ ordering of MAed $Ni_3Al$ powders.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.335-340
• /
• 1999

The hot cracking phenomena and phase behaviors during hot working process of Cu-Ni bearing hot rolled steels were investigated by a $90^{\circ}$bending tests, BSE image analysis and EDS analysis. For aNi-free 1.2% Cu bearing steel, the surface hot cracking occurred about $1100^{\circ}C$ due to a liquid state Cu-enriched phase formed continuously at the interface between oxide scale and matrix. The liquid Cu-enriched phase penetrated into austenite grain boundaries and caused surface cracking during the hot working. In case of 0.6% Ni containing 1.2% Cu-Ni bearing steel, solid state Cu-Ni-riched phase existed at the scale/matrix interface as a discontinuous type. But the higher addition of 1.2% Ni, solid state Ni-Cu-riched phase was formed dominantly in the oxide scale. It was found that the addition of Ni suppressed the surface cracking of 1.2% Cu bearing steel by eliminating the liquid state Cu-enriched phase.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.622-629
• /
• 1999

Effects of the fluorination in the $K_2$TiF\ulcorner solution and in-situ KF+ KOH electrolyte on the electrochemical charge-discharge properties of CaNi\ulcorner and the Mg-CaNi\ulcorner electrodes were investigated. In-situ fluorination in the KF+ KOH electrolyte compared with pre-fluorination in the$ K_2$TiF\ulcorner solution could improve the electrochemical cycling durability of CaNi\ulcorner and MG-CaN\ulcorner electrodes. The fluorinated layer on the alloy surface by pre-fluorination to improve the activity and anti-corrosion of the electrodes was dissolved in the pure KOH electrolyte during the cycling. The fluorinated layer was formed continuously on the surface of the electrode by thee2N KF addition in the 6N KOH electrolyte. The excess F\ulcorner ion addition in KOH electrolyte could improve the electrochemical cycling durability of CaNi\ulcorner and Mg-CaNi\ulcorner electrode. But, in case of MG-CaNi\ulcorner electrode, the discharge capacity of the electrode was reduced and the poor cycling property was shown with increasing of the MG process times.

• Journal of Applied Biological Chemistry
• /
• 제52권1호
• /
• pp.28-32
• /
• 2009

세균독소인 톨라신은 재배버섯에서 버섯균사 및 자실체의 구조를 파괴하여 갈반병을 일으킨다. 톨라신의 세포독성은 톨라신이 적혈구의 세포막에 pore를 형성하여 세포구조를 파괴하기 때문에 용혈활성을 측정하여 평가한다. 저자들은 $Zn^{2+}$와 $Cd^{2+}$에 의한 톨라신의 용혈활성 저해효과를 측정하는 중에 $Ni^{2+}$이 또 다른 저해제로 톨라신의 독성을 억제하는 것을 발견하였다. $Ni^{2+}$에 의한 톨라신 용혈활성의 저해는 농도의존적이었으며, Ki 값은 대략 10mM이었고, 이것은 $Ni^{2+}$이 $Cd^{2+}$에 비하여 저해효과가 높음을 의미한다. 용혈활성은 50mM 이상의 $Ni^{2+}$농도에서 완전히 제거되었으며, $Ni^{2+}$의 효과는 EDTA 첨가에 의해 가역적임을 확인하였다. 톨라신에 의한 용혈활성이 20mM $Ni^{2+}$에 의해서 완전히 억제된 상태에서 EDTA를 가하면 즉각 용혈활성이 나타났다. $Ni^{2+}$에 의한 톨라신 독성의 저해기작은 알 수 없지만, $Ni^{2+}$은 톨라신의 독성과정인 막결합, 분자중합체 형성, pore 형성, pore를 통한 막대한 양의 이온이동 등에 작용할 수 있을 것이다. 된 연구의 결과는 $Ni^{2+}$이 독성과정의 마지막 단계인 pore를 통한 이온이동 과정을 저해함을 보여준다.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.315-323
• /
• 1983

Effect of NiO and $MnO_2$ addtivies on the dielectric piezoelectrics and polarization-reversal properties of $(Pb_{0.936} La_{0.064})$$(Zr_{0.60}Ti_{0.40})O_3$ ceramics have been investigated. The specimens were prepared by the mixed oxide techni-que and atmosphere sintering method. The room temperature X-ray diffraction studies show that perfect perovskite solution with tetragonal structure was obtained from PLZT and its additives. The dielectric constant and dissipation factor decreased with the addition of both NiO and $MnO_2$ The Curie of Curie temperature was not observed but they displayed broadened maxima. The planar coupling factor was improved by addition of NiO and also increased with increasing sintering time carried out at 105$0^{\circ}C$ Addition of $MnO_2$ yielded a markedly high mechanical quality factor. The space-charge field decreased with the addition of NiO but increased with the addition of $MnO_2$ The planar coupling factor and space-charge field showed same dependence on the additivies. The tetragonality Curie temperature and planar coupling factor of $(Pb_{0.936} La_{0.064})$$(Zr_{0.60}Ti_{0.40})O_3$ were higher than those of $(Pb_{0.936} La_{0.064})$$(Zr_{0.568}NU_{0.032}Ti_{0.40})_{0.984}O_3$ but the grain size lattic parameter dielectric constant dissipation factor mechanical quality factor and space-charge field of the former were lower than those of the latter.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.86-95
• /
• 2012

This study investigated the effects of adding a third alloying element, Ni, to create $Fe_{70-x}Pd_{30}Ni_x$ (x = 2, 4, 6, 8 at.% Ni) ferromagnetic shape memory alloys (FSMAs). The Ni replaced a portion of the Fe. The $Fe_{70-x}Pd_{30}Ni_x$ alloys were homogenized through hot and cold forging to gain a ~38% reduction in thickness, next they were solution-treated (ST) with annealing recrystallization at $1100^{\circ}C$ for 8 h and quenched in ice brine, and then aged at $500^{\circ}C$ for 100 h. Investigation of the microstructures and magnetostriction indicated that the greater Ni amount in the $Fe_{70-x}Pd_{30}Ni_x$ alloys reduced saturation magnetostriction at room temperature (RT). It was also observed that it was more difficult to generate annealed recrystallization. However, with greater Ni addition into the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys, the $L1_0+L1_m$ twin phase decomposition into stoichiometric $L1_0+L1_m+{\alpha}_{bct}$ structures was suppressed after the $500^{\circ}C$/100 h aging treatment. The result was that the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys maintained a high magnetostriction and magnetostrictive susceptibility (${\Delta}{\lambda}{_\parallel}{^s}/{\Delta}H$) after the alloys were aged at $500^{\circ}C$ for 100 h. This magnetic property of the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys make it suitable for application in a high temperature (T > $500^{\circ}C$) and high frequency environments.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.64-70
• /
• 2012

Samples of pure Mg, 76.5 wt%Mg-23.5 wt%Ni, and 71.5 wt%Mg-23.5 wt%Ni-5 wt%$Fe_2O_3$ were prepared by reactive mechanical grinding and their hydriding and dehydriding properties were then investigated. The reactive mechanical grinding of Mg with Ni is considered to facilitate nucleation and to shorten diffusion distances of hydrogen atoms. After hydriding-dehydriding cycling, the 76.5 wt%Mg-23.5 wt%Ni and 71.5 wt%Mg-23.5 wt%Ni-5 wt%$Fe_2O_3$ samples contained $Mg_2Ni$ phase. In addition to the effects of the creation of defects and the decrease in particle size, the addition of Ni increases the hydriding and dehydriding rates by the formation of $Mg_2Ni$. Expansion and contraction of the hydride-forming materials (Mg and $Mg_2Ni$) with the hydriding and dehydriding reactions are also considered to increase the hydriding and dehydriding rates of the mixture by forming defects and cracks leading to the fragmentation of particles. The reactive mechanical grinding of Mg-Ni alloy with $Fe_2O_3$ is considered to decrease the particle size.

• 한국주조공학회지
• /
• 제7권4호
• /
• pp.352-357
• /
• 1987

Recently there were many studies on the development of cast iron for increasing strength, thermal resistance and mechanical properties, etc. The effects on mechanical properties and variation of solidification structure of hypo-eutectic cast iron was investigated when Ni(Al) was added with a fixed quantity of Al(Ni) content. The conclusions are as follows. 1) Tensile strength was the maximum(over 41 kg/ $mm^2$) when Al is added about 0.72%. 2) Torsional strength and angle were increased with increasing Al content and represents maximum value, when Al and Ni content are 1.5 and 2.0%. 3) With increasing Ni content, tensile strength decreased because of the effect of graphite coarsening. But torsional strengths were increased with the appropriate addition of (Ni%+Al%) content because of the effect of strengthened matrix.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1303-1308
• /
• 2001

A series of catalysts, NiSO4/TiO2, for ethylene dimerization was prepared by the impregnation method using aqueous solution of nickel sulfate. On the basis of the results obtained from X-ray diffraction, the addition of NiSO4 shifted the transition of TiO2 from the anatase to the rutile phase toward higher temperatures due to the interaction between NiSO4 and TiO2. Nickel sulfate supported on titania was found to be very active even at room temperature. The high catalytic activity of NiSO4/TiO2 closely correlated with the increase of acidity and acid strength due to the addition of NiSO4. It is suggested that the active sites responsible for ethylene dimerization consist of low valent nickel, Ni+, with an acid.

• Elastomers and Composites
• /
• 제57권2호
• /
• pp.48-54
• /
• 2022

A polymeric adhesion promoter was synthesized to improve the adhesive strength of the Ni lead frame/epoxy composite. Poly(itaconic acid-co-acrylamide) (IAcAAM) was prepared by copolymerizing itaconic acid and acrylamide. We compared the adhesive strength between the Ni lead frame and epoxy composite according to the molecular weight of IAcAAM. The molecular weight of IAcAAM was controlled using an initiator, which made it possible to use IAcAAM in the epoxy molding compound (EMC) manufacturing process by modulating the melting temperature. The adhesive strength of Ni lead frame/epoxy composite increased with the addition of IAcAAM to the epoxy composite. In addition, as the molecular weight of IAcAAM increased, the adhesive strength of the Ni lead frame/epoxy composite slightly increased. We confirmed that IAcAAM with an appropriate molecular weight can be used in the EMC manufacturing process and increase the adhesive strength of the Ni lead frame/epoxy composite.