• 대한의생명과학회지
• /
• 제16권3호
• /
• pp.201-206
• /
• 2010

In order to develop procedures for the rapid isolation of recombinant sugar transporter in functional form from away from the endogenous insect cell transporter, gene fusion techniques were exploited. Briefly, BamH1-digested human HepG2 type glucose transport protein cDNA was first cloned into a transfer vector pBlueBacHis, containing a tract of six histidine residues. Recombinant baculoviruses including the human cDNA were then generated by allelic exchange following transfection of insect cells with wild-type BaculoGold virus DNA and the recombinant transfer vector. Plaque assay was then performed to obtain and purify recombinant viruses expressing the human transport protein. All the cell samples that had been infected with viruses from the several blue plaques exhibited a positive reaction in the immnuassay, demonstrating expression of the glucose transport protein. In contrast, no color development in the immunoassay was observed for cells infected with the wild-type virus or no virus. Immunoblot analysis showed that a major immunoreactive band of apparent Mr 43,000~44,000 was evident in the lysate from cells infected with the recombinant baculovirus. Following expression of the recombinant fusion protein with the metal-binding domain and enterokinase cleavage site, the fusion protein was recovered by competition with imidizole using immobilized metal charged resin. The leader peptide was then removed from the fusion protein by cleavage with porcine enterokinase. Final separation of the recombinant protein of the interest was achieved by passage over $Ni^{2+}$-charged resin under binding conditions. The expressed transport protein bound cytochalasin B and demonstrated a functional similarity to its human counterpart.

• BMB Reports
• /
• 제33권2호
• /
• pp.172-178
• /
• 2000

The lipoxygenase was purified 35 fold to homogeneity from the Korean red potato by an ammonium sulfate precipitation and DEAE-cellulose column chromatography. The simple purification method is useful for the preparation of pure lipoxygenase. The molecular weight of the enzyme was estimated to be 38,000 by SDS-polyacrylamide gel electrophoreses and Sepharose 6B column chromatography. The purified enzyme with 2 M $(NH_4)_2SO_4$ in a potassium phosphate buffer, pH 7.0, was very stable for 5 months at $-20^{\circ}C$. Because the purified lipoxygenase is very stable, it could be useful for the screening of a lipoxygenase inhibitor. The optimal pH and temperature for lipoxygenase purified from the red potato were found to be pH 9.0. and $30^{\circ}C$, respectively. The Km and Vmax values for linoleic acid of the lipoxygenase purified from the red potato were $48\;{\mu}M$ and $0.03\;{\mu}M$ per minute per milligram of protein, respectively. The enzyme was insensitive to the metal chelating agents tested (2 mM KCN, 1 and 10mM EDTA, and 1 mM $NaN_3$), but was inhibited by several divalent cations, such as $Cu^{++}$, $Co^{++}$ and $Ni^{++}$. The essential amino acids that were involved in the catalytic mechanism of the 5-lipoxygenase from the Korean red potato were determined by chemical modification studies. The catalytic activity of lipoxygenase from the red potato was seriously reduced after treatment with a diethylpyrocarbonate (DEPC) modifying histidine residue and Woodward's reagent (WRK) modifying aspartic/glutamic acid. The inactivation reaction of DEPC (WRK) processed in the form of pseudo-first-order kinetics. The double-logarithmic plot of the observed pseudo-first-order rate constant against the modifier concentration yielded a reaction order 2, indicating that two histidine residues (carboxylic acids) were essential for the lipoxygenase activity from the red potato. The linoleic acid protected the enzyme against inactivation by DEPC(WRK), revealing that histidine and carboxylic amino acids residues were present at the substrate binding site of the enzyme molecules.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.438-439
• /
• 2013

Microelectronic devices의 접촉저항의 향상을 위해 Metal silicides의 형성 mechanism과 전기적 특성에 대한 연구가 많이 이루어지고 있다. 지난 수십년에 걸쳐, Ti silicide, Co silicide, Ni silicide 등에 대한 개발이 이루어져 왔으나, 계속적인 저저항 접촉 소재에 대한 요구에 의해 최근에는 Rare earth silicide에 관한 연구가 시작되고 있다. Rare-earth silicide는 저온에서 silicides를 형성하고, n-type Si과 낮은 schottky barrier contact (~0.3 eV)를 이룬다. 또한, 비교적 낮은 resistivity와 hexagonal AlB2 crystal structure에 의해 Si과 좋은 lattice match를 가져 Si wafer에서 high quality silicide thin film을 성장시킬 수 있다. Rare earth silicides 중에서 ytterbium silicide는 가장 낮은 electric work function을 갖고 있어 낮은 schottky barrier 응용에서 쓰이고 있다. 이로 인해, n-channel schottky barrier MOSFETs의 source/drain으로써 주목받고 있다. 특히 ytterbium과 molybdenum co-deposition을 하여 증착할 경우 thin film 형성에 있어 안정적인 morphology를 나타낸다. 또한, ytterbium silicide와 마찬가지로 낮은 면저항과 electric work function을 갖는다. 그러나 ytterbium silicide에 molybdenum을 화합물로써 높은 농도로 포함할 경우 높은 schottky barrier를 형성하고 epitaxial growth를 방해하여 silicide film의 quality 저하를 야기할 수 있다. 본 연구에서는 ytterbium과 molybdenum의 co-deposition에 따른 silicide 형성과 전기적 특성 변화에 대한 자세한 분석을 TEM, 4-probe point 등의 다양한 분석 도구를 이용하여 진행하였다. Ytterbium과 molybdenum을 co-deposition하기 위하여 기판으로 $1{\sim}0{\Omega}{\cdot}cm$의 비저항을 갖는 low doped n-type Si (100) bulk wafer를 사용하였다. Native oxide layer를 제거하기 위해 1%의 hydrofluoric (HF) acid solution에 wafer를 세정하였다. 그리고 고진공에서 RF sputtering 법을 이용하여 Ytterbium과 molybdenum을 동시에 증착하였다. RE metal의 경우 oxygen과 높은 반응성을 가지므로 oxidation을 막기 위해 그 위에 capping layer로 100 nm 두께의 TiN을 증착하였다. 증착 후, 진공 분위기에서 rapid thermal anneal(RTA)을 이용하여 $300{\sim}700^{\circ}C$에서 각각 1분간 열처리하여 ytterbium silicides를 형성하였다. 전기적 특성 평가를 위한 sheet resistance 측정은 4-point probe를 사용하였고, Mo doped ytterbium silicide와 Si interface의 atomic scale의 미세 구조를 통한 Mo doped ytterbium silicide의 형성 mechanism 분석을 위하여 trasmission electron microscopy (JEM-2100F)를 이용하였다.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.31-40
• /
• 2003

In August-September 2001, 15 samples of bottom sediments were collected in the inner, middle and open parts of Amursky Bay near Vladivostok, Russia, and barfin plaice Pleuronectes pinnifasciatus was sampled from the inner and the middle locations of the bay. In the sediments from all three sites elevated concentrations of several heavy metals, i.e. Zn ($102-115{\mu}/g$ dry weight), Ni $(70-73{\mu}g/g)$ and Cu $(27-35{\mu}g/g)$ were discovered. The contents of oil hydrocarbons were very close to or slightly higher than the maximal normal environmental background level, $100{\mu}g/g$ dry weight. The sediments contained negligible amounts of hexachlorocyclohexane, while DDT concentrations were quite high (1.7-16.3ng/g dry weight). Generally, there were no substantial differences in the pollution levels of the locations studied and our results resembled those reported for Amursky Bay in the 1990s. Surprisingly, in 2001 'fiesh' DDT comprised 70-85% of the total DDT content in sediment from all the locations studied. In fish liver total DDTs concentrations were 212.8 and 122.54 ng/g wet weight for the inner and the middle locations, respectively, and 'fresh' DDT comprised 35 and 64% of DDTs, respectively. These results provide evidence of recent input of DDT from an unknown source into the ecosystem of Amursky Bay. Histopathological changes revealed in the plaice liver (vacuolization of hepatocytes, coagulative necrosis of hepatocytes, inflammatory reaction, and necrosis of epithelial cells of bile ducts) are probably connected with an intensive metabolism of DDT in the fish organism. No histological and histomorphometric differences were found in the state of the interrenal tissue. Similar condition of the liver and the interrenal tissue in barfin plaice sampled from the inner and the middle locations of Amursky Bay may be explained by the absence of great differences in the pollution levels of these sites.

• 환경위생공학
• /
• 제19권1호
• /
• pp.8-16
• /
• 2004

Ground water samples were collected from residential, green" industrial, landfill and mining area and analyzed for 23 inorganics from March to October in 2002. The results are as follows; 1. The detection frequencies of inorganic materials such as As, Ba, B, Mo, Ca, Mg, Al, Cu, Fe, Mn, Zn, Na, K were 7.2∼77.1% which showed that these inorganics were detected in many ground waters. 2. The detection frequencies of 7 inorganics(Cd, Cr, Ph, Se, Sb, Be, Tl) were commonly low at ranging from 0.42 to 2.5%. These inorganics were contained in ground water partially. 3. Three inorganics such as Hg, Ni, Ag were not detected in any ground-water samples. 4. Compared to the other areas, ground water samples from landfill area contained greater concentration in many inorgainics and then showed higher levels in industral, residential, mining and green area in order. 5. Compared to noted concentrations of bottled water, inorganic minerals including Ca, Mg, Na, K related to taste were fluent in target samples. The results showed that the average concentrations of Mg, Na, K were 4.0 mg/l, 14.7 mg/l, 1.5 mg/l respectively. 6. The concentrations of inorganics such as Sb, Ba, Mo, Be, Tl, K in some ground water samples exceeded the water quality standards of WHO, the US and UK. Especially, Ba, Mo, K also showed relatively high detection frequencies so these inorganics need to be considered as analytes in Korea Drinking Water Regulation in further study.

• 대한의생명과학회지
• /
• 제18권4호
• /
• pp.362-368
• /
• 2012

Enterotoxigenic Bacteroides fragilis (ETBF) is an intestinal commensal bacterium implicated as a risk factor for colon cancer. The key virulence factor is a secreted toxin called B. fragilis toxin (BFT). In this study we used an in vitro bioassay to examine the prevalence of ETBF in colonic washings from patients with colorectal polyps and normal control patients. We found that 9.3% of polyp patients and 10.9% of non-polyp patients harbored ETBF, respectively. A total of nine ETBF clinical isolates were isolated and confirmed to be positive for the BFT gene by PCR analysis and the ability to induce IL-8 secretion in the colonic epithelial cell line HT29/c1. Two of the ETBF clinical strains were characterized further in vitro and in vivo. We found that the two ETBF clinical isolates induced E-cadherin cleavage in HT29/c1 cells and promoted colonic inflammation in C57BL/6 mice. Our results indicate that the prevalence of ETBF in polyp patients were similar in non-polyp patients suggesting that ETBF carriage does not positively correlate to polyp incidence.

• Restorative Dentistry and Endodontics
• /
• 제41권2호
• /
• pp.114-120
• /
• 2016

Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.206-206
• /
• 2010

정보화 기술이 급속히 발전함에 따라서 보다 많은 양의 data를 전송, 처리, 저장 하게 되면서 이를 처리 할 수 있는 대용량, 고속, 비휘발성의 차세대 메모리의 개발이 요구 되고 있다. 이 중 저항 변화 메모리(ReRAM)는 일반적으로 전이금속산화물을 이용한 MIM 구조로서 적당한 전기 신호를 가하면 저항이 높아서 전도되지 않는 상태(Off state)에서 저항이 낮아져 전도가 가능한 상태(On state)로 바뀌는 메모리 특성을 가진다. ReRAM은 비휘발성 메모리이며 종래의 비휘발성 기억소자인 Flash memory 보다 access time이 $10^5$배 이상 빠르며, 2~5V 이하의 낮은 전압에서 동작이 가능하다. 또한 구조가 간단하여 공정상의 결함을 현저히 줄일 수 있다는 점 등 많은 장점들이 있어서 Flash memory를 대체할 수 있는 유력한 후보로 여겨지고 있다. 저항 변화의 특징을 잘 나타내는 물질에는 $TiO_2$, $Al_2O_3$, $NiO_2$, $HfO_2$, $ZrO_2$등의 많은 전이금속산화물들이 있다. 본 연구에서는 Reactive DC-magnetron Sputtering 방법과 DC-magnetron sputter를 이용하여 Ti를 증착한 후 Oxidation 방법으로 각각 증착한 $TiO_2$박막을 사용하여 저항변화특성을 관찰하였다. $TiO_2$상부에 Atomic Layer Deposition (ALD)를 이용하여 $HfO_2$ 박막을 증착하여 표면처리를 하고, 또한 $TiO_2$에 다른 전이 금속박막 층을 추가 증착하여 저항변화 특성에 접합한 조건을 찾는 연구를 진행하였다. 하부 전극과 상부 전극 물질로는 Si 100 wafer 위에 Pt 또는 TiN을 사용하였다. 저항변화 특성을 평가하기 위해 Agilent E5270B를 이용하여 current-voltage (I-V)를 측정하였다. X-ray Diffraction (XRD)를 이용하여 증착 된 전기금속 박막 물질의 결정성을 관찰했으며, Atomic Force Microscopy (AFM)을 이용하여 증착 된 샘플의 표면을 관찰했다. SEM과 TEM을 통해서는 sample의 미세구조를 확인 하였다.

• 한국대기환경학회지
• /
• 제28권5호
• /
• pp.538-555
• /
• 2012

The purpose of this study was to understand $PM_{2.5}$ chemical characteristics on the Suwon/Yongin area and further to quantitatively estimate $PM_{2.5}$ source contributions. The $PM_{2.5}$ sampling was carried out by a high-volume air sampler at the Kyung Hee University-Global Campus from November, 2010 to October, 2011. The 40 chemical species were then analyzed by using ICP-AES(Ag, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V and Zn), IC ($Na^+$, $K^+$, $NH_4{^+}$, $Mg^{2+}$, $Ca^{2+}$, $NO_3{^-}$, ${SO_4}^{2-}$ and $Cl^-$), DRI/OGC (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) and GC-FID (acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[a] pyrene, indeno[1,2,3-cd] pyrene, benzo[g,h,i]perylene and dibenzo[a,h,]anthracene). When applying PMF model after performing proper data treatment, a total of 10 sources was identified and their contributions were quantitatively estimated. The average contribution to $PM_{2.5}$ emitted from each source was determined as follows; 26.3% from secondary aerosol source, 15.5% from soil and road dust emission, 15.3% from vehicle emission, 15.3% from illegal biomass burning, 12.2% from incineration, 7.2% from oil combustion source, 4.9% from industrial related source, and finally 3.2% from coal combustion source. In this study we used the ratios of PAHs concentration as markers to double check whether the sources were reasonably classified or not. Finally we provided basic information on the major $PM_{2.5}$ sources in order to improve the air quality in the study area.

• 한국식품위생안전성학회지
• /
• 제27권2호
• /
• pp.152-160
• /
• 2012

본 연구에서는 경남에 소재한 토마토 토경재배농장 3곳 (A, B, C)과 양액재배농장 3곳 (D, E, F)을 대상으로 토마토 재배단계의 재배환경과 개인위생에 대하여 생물학적 및 화학적 (중금속) 위해요소를 분석하였다. 생물학적 위해요소를 분석한 결과 재배환경에서 위생지표세균의 경우 토경재배농장의 토양에서 일반세균과 대장균군이 최대7.2 및 6.1 log CFU/g 검출되었고, 관개용수에서는 1.7 log CFU/mL 이하로 검출되었으며, E. coli의 경우 B농장의 토양에서만 1건 검출되었다. 양액재배농장의 양액과 관개용수에서는 일반세균만 최대 1.4 및 1.8 log CFU/mL수준으로 검출되었다. 개인위생의 경우 일반세균과 대장균군이 토경재배농장에서는 0.4-4.6 log CFU/hand, 100 $cm^2$ 수준으로, 양액재배농장에서는 0.4-5.4 log CFU/hand, 100 $cm^2$ 수준으로 검출되었다. 병원성 미생물은 B. cereus만 토경재배농장의 토양에서 최대 4.4 log CFU/g, 관개용수에서 0.5 log CFU/mL, 개인위생에서 1.0-2.9 log CFU/hand, 100 $cm^2$ 검출되었고, 양액재배농장의 개인위생에서 0.5-2.8 log CFU/hand, 100 $cm^2$ 수준으로 검출되었다. 화학적 위해요소인 중금속(Cd, Cu, As, Hg, Pb, Cr, Zn 및 Ni)은 분석 결과 모두 허용기준치 이하 또는 불검출로 나타났다. 따라서 토마토의 재배단계에서 미생물의 오염으로 인한 위해를 확인할 수 있었으며, 안전성을 확보하기 위해서는 최종산물로까지 발생할 수 있는 모든 위해요소를 파악하고 이를 효율적으로 차단시키기 위한 체계적인 관리방안이 모색되어야 할 것으로 판단된다.