• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.323-323
• /
• 2013

High power light-emitting diodes (LEDs) are widely used in many device applications due to its ability to operate at high power and produce high luminance. However, releasing the heat accumulated in the device during operating time is a serious problem that needs to be resolved to ensure high optical efficiency. Ceramic or Aluminium base metal printed circuit boards are generally used as integral parts of communication and power devices due to its outstanding thermal dissipation capabilities as heat sink or heat spreader. We investigated the characterisation of electroless plating of Ni-B film according to plating bath temperature, ranging from $50^{\circ}C$ to $75^{\circ}C$ on Ag paste/anodised Al ($Al_2O_3$)/Al substrate to be used in metal PCB for high power LED packing systems. X-ray diffraction (XRD), Field-Emission Scanning Electron Microscopy (FE-SEM) and X-ray Photoelectron Spectroscopy (XPS) were used in the film analysis. By XRD result, the structure of the as deposited Ni-B film was amorphous irrespective of bath temperature. The activation energy of electroless Ni-B plating was 59.78 kJ/mol at the temperature region of $50{\sim}75^{\circ}C$. In addition, the Ni-B film grew selectively on the patterned Ag paste surface.

• 소성∙가공
• /
• 제7권5호
• /
• pp.465-473
• /
• 1998

The effect of alloying elements of Ag-Cu-Zr-X brazing alloy on the microstructure and the bond strength of $Al_2O_3/Ni-Cr$ brazed steel joint was investigated. The reaction layer, $ZrO_2$ (a=5.146 ${\AA}$ , b=5.213 ${\AA}$ , c=5.311 ${\AA}$ )was formed at the interface of $Al_2O_3/Ni-Cr$ steel joint by the redox reaction between alumina and Zr. The addition of An and Al to the Ag-Cu-Zr brazing alloy gave rise to changes in the thickness of the reaction product layer and the morphology of the brazement. Sn caused the segregation of Zr was decreased b Al the $ZrO_2$ layer formed at the Ag-Cu-Zr-Al alloy was thinner than that of $ZrO_2$ formed at the Ag-Cu-Zr-An alloy. The fracture shear strength was strongly dependent on the microstructure of the brazement. Brazing with Ag-Cu-Zr-Sn alloy resulted in a better bond strength than with Ag-Cu-Zr or Ag-Cu-Zr-Al alloy.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.351-354
• /
• 2010

Nickel nanoparticles (Ni NPs) appeared to exhibit the catalytic activity in one-pot cyclocondensation reaction for the preparation of 3,4-dihydropyrimidine-2(1H)-ones via Biginelli reaction from aromatic/heteroaromatic/aliphatic aldehydes, urea/thiourea and ethyl acetoacetate under microwave irradiation has been described. The UV absorbance spectra showed metallic Ni characteristics and appreciate with the particle size determined by Transmission electron microscopy (TEM). After reaction course the Ni NPs can be re-covered and reused without any apparent loss of activity.

• 신재생에너지
• /
• 제1권1호
• /
• pp.64-71
• /
• 2005

The stability of alumina-coated NiO cathodes was studied in $Li_{0.62}/K_{0.38}$ molten carbonate electrolyte. Alumina was effectively coated on the porous Ni plate using galvanostatic pulse plating method. The deposition mechanism of alumina was governed by the concentration of hydroixde ions near the working electrode, which was controlled by the temperature of bath solution. Alumina-coated NiO cathodes were formed to $A1_2O_3-NiO$ solid solution by the oxidation process and their Ni solubilities were were than that of NiO up to the immersion time of 100h. However, their Ni solubilities increased and were similar to that of the bare NiO cathode after 100h. It was because aluminum into the solid solution was segregated to $\alpha-LiAlO_2$ on the NiO and its Product did not Play a role of the Physical barrier against NiO dissolution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.54-56
• /
• 2005

Fabrication of c-axis oriented $(Hg_{0.75}Rc_{0.25})Ba_2Ca_2Cu_3O_y$ thick fabricated has been attempted using Ni substrates with the buffer layer of Cr or NiO. Coexistence of $(Hg_{0.75}Rc_{0.25})Ba_2Ca_3Cu_4O_y$ pellets wad found to stabilize $(Hg_{0.75}Rc_{0.25})Ba_2Ca_2Cu_3O_y$ phase of the tape. The c-axis oriented tapes were reproducibly obtained on the NiO/Ni substerate and they recorded high $B_{irr}$ at 77K.$(Hg_{0.75}Rc_{0.25})Ba_2Ca_2Cu_3O_y$ 1223.

• 한국결정성장학회지
• /
• 제13권6호
• /
• pp.297-303
• /
• 2003

rf magnetron sputtering법을 이용하여 Mn-Ni-Co계 써미스터 박막을 증착하였다. $300^{\circ}C$ 및 $Ar/O_2$ = 10/0에서, cubic spinel 상형성이 이루어졌으며 공정가스에 산소 첨가 시, cubic spinel 상은 열처리를 통해서도 형성되지 않았다. 써미스터 박막은 Mn, Ni, Co 성분 외 다른 이종 성분은 포함되어 있지 않았다. 써미스터 박막에 대한 적외선 반사 특성을 분석으로 증착된 박막은 일정 각도로 입사되는 적외선에 대해 비교적 높은 반사율을 가짐을 관찰할 수 있었다. DI water : $HNO_3$: HCI=60 : 30 : 10 vo1%에서 써미스터 박막의 식각 속도는 약 63 nm/min였다. 박막 써미스터의 B상수는 약 3500 K였으며 TCR은 약 -3.95%/K였다 전압감도는 약 108.5 V/W였으며 NEP와 specific detectivity는 각각 $5.1\times 10^{-7}$ W/$Hz^{-1/2}$ $0.2\times 10^6$cm $Hz^{1/2}$/W였다.

• 분석과학
• /
• 제21권6호
• /
• pp.562-568
• /
• 2008

A novel two-dimensional cadmium(II)-nickel(II) bimetallic host clathrate, $[Cd{NH_2CH_2CH_2OH}_2Ni(CN)_4]{\cdot}3C_6H_5NH_2{\cdot}H_2O$, 1, has been synthesized and structurally characterized by X-ray single crystallographic method. The clathrate 1 crystallizes in the monoclinic system, space group $P2_1/c$ with a = 14.370(3), b = 7.728(1), c = 28.172(4) ${\AA}$, ${\beta}=97.58(1)^{\circ}$, V = 3101.1(9) ${\AA}^3$, Z = 4. The host framework of the clathrate 1 is built of the cyanide bridges between octahedral Cd(II) atom and square planar Ni(II) atom. The octahedral Cd atoms ligated by two 2-aminoethanol molecules and four cyanide ligands bridged with square planar Ni atoms. The Ni atoms bridges to four Cd atoms via cyanides is made up of puckered quadrangles of composition $\{CdNi(CN)_2\}_2$, all edges are shared. This cyanide bridges form an infinite two-dimensional host networks stacking along b axis. 2-Aminoethanol ligands bond to Cd atom through N atom as a monodentate ligand in the axial position and four cyanides take an equatorial plane with all in trans-configurations. The aniline guest molecules and water molecules are located in between the host layer sheets, respectively.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.749-752
• /
• 1995

Electronic structures of the Heusler compounds, XMnSb (X=Ni, Pd, and Pt) are investigated systematically by using the linearized muffiu-tin orbital (LMTO) band method. LMTO band calculations yield that, by including the spinorbit interactions, the NiMnSb and PtMnSb are half-metallic, while PdMnSb is normal metallic at the experimental lattice constant. The effect of the spin-orbit interaction is substantial in PtMnSb, in contrast to NiMnSb and PdMnSb. The calculated X d and Mn 3d angular momentum projected local density of states's reveal that the hybridization between the Mn 3d X d states increases from X = Pt to Pd and Ni.

• 한국결정성장학회지
• /
• 제31권3호
• /
• pp.112-115
• /
• 2021

Herein, a correlation between B-site cation order and spin-phonon coupling in La₂NiMnO₆ double perovskite has been investigated. Raman spectra of La₂NiMnO₆ double perovskite annealed at 950 and 1400℃ have been measured in the 140-598 K range. A substantial softening of the phonon modes has been observed below the Curie temperature, which emphasized the presence of the spin-phonon coupling in the system. The spin-phonon coupling was found to be stronger in relatively more ordered La₂NiMnO₆ double perovskite. Thus, the magnitude of spin-phonon coupling was influenced by the Ni/Mn cation order.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.730-734
• /
• 1995

The variation of magnetic permeability and dielectric constant and their relationship with microwave absorbing properties are investigated in sintered Ni-Zn ferrite. Toroid specimens of ${(Ni_{0.5}Zn_{0.5}O)}_{1-y}{(Fe_{2}O_{3})}_{1+y}$ ferrites are prepared by conventional ceramic processing technique. The large change in magnetic permeability is observed by the variation of excess $Fe_{2}O_{3}$ in the Ni-Zn ferrites. The more the iron-excess from y=0.04 to y=0.12, the lower value of both $\mu_{r}'$ and $\mu_{r}"$ is observed. However dielectric permittivity increases with the increase of the increase of the excess $Fe_{2}O_{3}$. The control of permittivity is realized by nitrogen sintering atmosphere and excess $Fe_{2}O_{3}$ respectively.