• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.200-203
• /
• 2009

현재 발전차액 지원을 받고 있는 신재생에너지 전원은 태양광, 풍력, 수력, 매립가스, 바이오 가스, 연료전지 등 6개 전원이 있다. 신재생에너지 중에서 태양광, 조력, 연료전지, 풍력의 기준가격은 고정가격이며, 폐기물은 변동가격이고, 수력, 매립가스, 바이오가스, 바이오매스는 고정가격과 변동가격 중에서 선택할 수 있도록 되어 있다. 지난 2년간 신재생에너지 발전소 실적 이용률을 기준가격 적용 이용률과 비교해 보면 매립가스(20MW 미만), 바이오가스, 연료전지 이용률은 기준가격 적용 이용률 보다 낮게 나타났으며, 특히 바이오가스는 실적 이용률이 매우낮게 나타났다. 기타 신재생에너지 전원은 실적 이용률이 높게 나타났다. 발전차액(기반기금)은 기준가격에서 계통한계가격을 뺀 금액을 의미하며 고정가격, 변동가격의 요금선택에 따라 발전차액에 미치는 요소들이 달라진다. 고정가격을 선택한 경우는 계통한계가격, 이용률(전력 거래량)이 영향을 미치며 변동가격을 선택한 경우는 이용률만이 발전차액에 영향을 미친다.

• 신재생에너지
• /
• 제16권1호
• /
• pp.41-46
• /
• 2020

The share of agrophotovoltaics in the "renewable energy 3020", which is the Korean government policy for revitalizing new and renewable energy, is increasing gradually. In this study, the distribution of solar radiation received by crops growing on virtual farmland under a range of conditions, such as module height, module angle, shading ratio, and module type, was quantified and analyzed using an Ecotect program, which allows insolation analysis during the period from spring to fall. As the module angle increases, transmissive modules increase the amount of solar radiation delivered to the lower farmland. In addition, the difference between 3x12 Cell Type and 4x9 Cells Type, which are types of photovoltaic modules used in practice, was found to be small. The analysis results can be used as a design standard for the future establishment of agrophotovoltaic systems.

• 신재생에너지
• /
• 제3권3호
• /
• pp.20-27
• /
• 2007

태양광 분야에서 일본은 기술 및 보급에 성공한 대표적인 사례로서 거론된다. 태양광의 에너지자원화를 목표로 30여 년간 지속적으로 국가차원의 기술개발 및 보급을 정책 사업화하여 진행시켰고 성공적인 선행 단계를 밟아 왔다. 현재까지의 성공을 기반으로 [태양광 비전 2030]을 수립하여 실현가능한 장기 목표를 구체화하는 단계에 있다. 이에 일본 태양광 산업 및 기술개발 방향에 대한 분석을 통해 오늘 우리에게 주는 시사점을 도출하여 차세대 성장 동력 산업이 될 국내 태양광분야의 발전을 위한 지표로 삼고자 한다.

• 신재생에너지
• /
• 제18권1호
• /
• pp.35-45
• /
• 2022

The renewable energy based MG is becoming one of the prominent solutions for greenhouse gas and constructing less power lines. However, how to procure the economics of MG considering the CO₂ emission and utility network impact is one of major issues as the proportion of renewable resource increases. This paper proposes the feasibility study scheme of campus MG and shows that the LCOE and CO₂ emission can be reduced by utilizing the excess power and introducing hydrogen system and plus DR. For this, the three cases: (a) adding the PV and selling excess power to utility, (b) producing and selling hydrogen using excess power, and (c) participating in plus DR are considered. For each case, not only the topology and component capacity of MG to secure economic feasibility, but also CO₂ emission and utility network effects are derived. If an electrolyzer with a capacity of 400 kW participates in plus DR for 3,730hours/year, the economic feasibility is securable if plus DR settlement and hydrogen sale price are more than 7.08¢/kWh and 8.3USD/kg or 6.25¢/kWh and 8.6USD/kg, respectively. For this end, continuous technical development and policy support for hydrogen system and plus DR are required.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.287-293
• /
• 2008

As the instability of international societies on the energy resources has increasingly been deepened due to excessive use of fossil fuels, the importance of energy saving and global environment protection has highlighted, So the interests in environment-friendly and stable new & renewable energy have been dramatically increased. The studies on reconstructing the old-fashioned towns economically, socially and physically have been also significantly increased. In this urban regeneration, renewable-energy using systems were aggressively applied to overcome the energy and environmental problems of the existing towns. There have been many of studies on the compound applications of the renewable-energy using systems in the advanced countries while they are insufficient in Korea. As a preliminary study of urban renewable-energy using system development, this paper surveyed the foreign cases applied to key technologies such as geothermal energy, hydrogen fuel cell and bioenergy among the renewable-energies in urban built environment.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.19-29
• /
• 2019

Recently, with the rise of environmental issues and the change of government policy (Renewable Energy 3020 Implementation Plan), a large amount of renewable energy such as solar and wind power is connected to the power system, and most of the renewable energy is concentrated in the power distribution network. This causes many problems with the voltage management and the protection coordination of the grid due to the its intermittent power generation. In order to effectively operate the distribution network, it is necessary to deploy more intelligent terminal devices in the field to measure the status of the distribution network and develop various operation functions such as visualization and big data analysis to support the power distribution system operators. In addition, the failover technology must be supported for the non-stop operation of the power distribution system. This paper proposes the system architecture of new power distribution management system to cope with high penetration of renewable energy. To verify the proposed system architecture, the functional unit test and performance measurement were performed.

• 신재생에너지
• /
• 제19권1호
• /
• pp.22-30
• /
• 2023

Recently, the use of renewable energy has been increasing to achieve carbon neutrality. The concept of a zero-energy building is also attracting attention. In this study, a preliminary study was conducted to analyze the feasibility of a hybrid wind and solar power generation system between buildings that utilize the building wind generated by the Venturi effect. For this purpose, the wind speed and sunshine hours were monitored in the area where the building wind blows by the Venturi effect, and the power generation depending on system types, areas, and season was estimated. Consequently, the wind power generation system showed a larger amount of power per area than solar power. The wind power systems can generate larger power if wind power blades are installed along the height of the building. As a preliminary study, this study verified the feasibility of the system utilizing building wind and suggested follow-up studies.

• 대한기계학회논문집B
• /
• 제35권12호
• /
• pp.1367-1373
• /
• 2011

본 연구에서는 천연냉매를 적용한 압축/흡수식 하이브리드 고온제조 히트펌프를 실험적으로 연구한 결과를 제시하였다. 압축/흡수식 히트펌프는 기존의 증기압축 히트펌프에 비해 고온영역을 포함한 넓은 생산온도범위, 높은 승온기능, 다양한 용량 제어방법 등 여러가지 장점을 가지고 있다. 제작된 하이브리드 히트펌프는 현재 실제 산업현장에 적용하기 이전의 초기 시제품 단계로 실험실에 설치하여 운전하였으며, 주요 구성부품으로는 이단압축기, 흡수기, 재생기, 과열냉각기, 용액 열교환기, 용액펌프, 기액분리기/정류기 등이다. 성능실험에서 $50^{\circ}C$의 열원을 고온 및 저온열원으로 사용한 결과 $90^{\circ}C$ 이상의 고온수 토출과 10 kW급의 난방 용량을 얻을 수 있었다. 혼합냉매의 성분비 변화에 따른 압축기/펌프 유량의 순환비 변화 및 다양한 성능변화를 실험적으로 관찰하였으며, 시스템의 효율과 용량에 있어 최적 성분비가 존재함을 확인하였다.

• 대한산업공학회지
• /
• 제40권2호
• /
• pp.195-204
• /
• 2014

The transition from fossil to renewable energy is inevitable due to fossil depletion. So, Renewable energy is very important for energy security and economic growth although it's R&D is long-term and high risky project. We propose new valuation method which combined system dynamics and compound real option method for long-term and high risk projects such as renewable energy. This method can show dynamic valuation results for the complex causal interaction and be easy for Monte-Carlo simulation to estimate volatility. And it can reflect the value of flexible decision for uncertainty. We applied the empirical analysis for Korea's photovoltaic industry by using this method. As results by empirical analysis, photovoltaic's R&D has high valuation using this method compared by traditional valuation methods such as DCF.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.502-511
• /
• 2017

Design, manufacture and operate the 700W Solid oxide fuel cell system suitable for housing. Except for BOP not produced domestically, most of the domestic BOPs were applied as much as possible. Finally, the system size was 350 liter. System performance was electric efficiency 44.64%, thermal efficiency 40.99%, total efficiency 85.62% at certificate authority. The system was operated for 4,500 hours, this operation time include automatically system on/off, E-stop for emergency stop, load trip for blackout and inverter error. There were that the system on/off were 26 times. System performance remains intact after system on/off.