• Journal of Hydrogen and New Energy
• /
• v.19 no.2
• /
• pp.145-155
• /
• 2008

This paper deals with an economic evaluation of hydrogen production by fermentation. We evaluate the economic feasibility of domestic hydrogen production by fermentation utilizing glucose and waste water sludge in terms of hydrogen production prices. In addition, we make some sensitivity analysis of hydrogen prices by changing the values of input factors such as the price of glucose, the capital cost of the hydrogen production system, and the hydrogen production yields. The estimated hydrogen prices of the two-step dark-light hydrogen production by fermentation utilizing glucose was $5,347won/kgH_2$, and the single-step hydrogen production by anaerobic fermentation utilizing waste water sludge was $4,255won/kgH_2$, respectively. It is expected that the hydrogen production price by anaerobic fermentation can be reduced if we produce methane or hydrogen utilizing by-products such as alcohols and organic acids, or the government imposes some legal regulations on the treatment of waste water sludge.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3460-3463
• /
• 2021

Present computing power and enhanced technology is progressing at a dramatic rate. These systems can unravel complex issues, assess and control processes, learn, and-in many cases-fully automate production. There is no doubt that technological advancement is improving many aspects of life, changing the landscape of virtually all industries and enhancing production beyond what was thought possible. However, the human is still a part of these systems. Consequently, as the advancement of systems transpires, the role of humans within those systems will unavoidably continue to adapt as well. Due to the human tendency for error, this technological advancement should compel a persistent emphasis on human error reduction as part of maximizing system efficiency and safety-especially in the context of the nuclear industry. Within this context, as new systems are designed and the role of the human is transformed, human error should be targeted for a significant decrease relative to predecessor systems and an equivalent increase in system stability and safety. This article contends that optimizing the roles of humans and machines in the design and implementation of new types of automation in nuclear facility systems should involve human error reduction without ignoring the essential importance of human interaction within those systems.

• IE interfaces
• /
• v.15 no.1
• /
• pp.26-39
• /
• 2002

Two key data areas of the integrated production database in computer-integrated manufacturing (CIM) systems are the product structure in the forms of bills of material(BOM) and the process structure in the forms of routings. The great majority of existing information systems regard the BOM and routing as two separate data entities, possibly with some degree of cross-referencing. This paper proposes new information structure called the bills of material and routings(BMR) that logically integrates the BOM and routings for the CIM systems in ship production. The characteristics of ship production are described as: 1) make-to-order production type, 2) combined manufacturing principles (workshop production and construction site production), 3) significant overlapping of design, planning and manufacturing, 4) very long order throughput time, 5) complex product structure and production process. The proposed BMR systematically manages ail parts and operations data needed ship production considering characteristics of ship production. Also, the BMR situated on the integrated production database more efficiently supports interface between engineering and production functions, and integrates a wide variety of functions within production such as production planning, process planning, operation scheduling, material planning, costing etc., and simplifies information flow between sub-systems in CIM systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.101.6-101
• /
• 2001

This paper deals with inspect algorithm using visual system. One of the major problems that arise during polymer production is the estimation of the noise of the product(bad pallets). An erroneous output can cause a lot of losses (production and financial losses). Therefore new methods for real-time inspection of the noise are demanded. For this reason, we have presented a development of vision system algorithm for the defect inspection of PE pallets. First of all, in order to detect the edge of object, the differential filter is used. And we apply to the labeling algorithm for feature extraction. This algorithm is designed for the defect inspection of pallets ...

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.67-77
• /
• 1988

Quality Assurance is a system of activities whose purpose is to provide assurance that the over all quality control job is in fact being done effectively. In this paper, we tried to develop the fundamental quality assurance procedures that can be applicable to the new-product design stage, to the production stage and to the after-sales stage of the production system.

• IE interfaces
• /
• v.24 no.3
• /
• pp.241-247
• /
• 2011

This paper develops a mathematical model which searches an optimum lot size of a press line, and applies this model to the scheduling of the press line. This mathematical model is not a widely studied cost model but a model which considers the utilization of the press line under a lean production system. In this paper, the optimum lot size is a minimum lot size which does not exceed the total work time of the press line. A production volume and the priority of the production in the press line are adjusted using this optimum lot size. A mathematical model developed in this paper will allow determining the optimum lot size easily in case of variable production environments such as an introduction of a new product and a fluctuation of production volume of each item. Therefore, our model will make a better scheduling of the press line and will enhance the utilization of it.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.79-85
• /
• 2007

The modem industry age began when the conveyer system was introduced by Ford to produce model "T". The conveyer system is designed to optimize and maximize mass production of a specific item. Nowadays, however, accommodating to individual tastes has become an important factor in selection of products. Thus, rather than the mass production of one item, producing fewer but a wide variety of goods became important. To give flexibility and elasticity to the conveyer system, a new method of transportation where it is possible to choose a specific item is necessary. Therefore mall quantity and high-volume mass production was decrescent and small quantity batch production was expanded. In this paper, we developed multiple crate stacking and picking system to give flexibility to the conveyer system. First, we verified the conceptually designed system through manufacture. Second, we solved the problems that would happen on the actual field using pneumatic system. Finally, we optimized the system through FEM technique. This system works with stability and fast speed and can improve work efficiency which would minimize the losses resulting from too much dependence on manual labor.

• Journal of Korean Library and Information Science Society
• /
• v.30 no.3
• /
• pp.199-232
• /
• 1999

As growing internet, the knowledge management system(KMS) is newly introduced in business. And the KMS is very similar with traditional library. By grafting the KMS on the library, to input effectively in production line the knowledge that is important to knowledge society as a production factor, it is necessary to unificate with KMS and library. That unification is finally a new model for 21centry library.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.597-604
• /
• 2014

High efficiency production requires the improved performance of CAD/CAM system. Although the CAD and CAM have been significantly developed over the last three decades, they must still study on the reuse of information during process. In this study, we developed a new integrated CAD/CAM system which can reuse the information generated in previous processes, in order to improve its performance. In addition, the developed system was verified by comparing with working-time, and system reproducibility was also examined with tolerance in the unmanned operation. Experimental results showed 58% reduction in working-time of 2D Auto-CAM module, 80% in case of 3D Auto-Exchange module, and 54.5% in case of Auto-Design module.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.211-214
• /
• 2014

Nowadays, manufacturing field are facing new challenges, through digital information and global integration, toward sophisticated production. This paper presents the system configuration and issues of current manufacturing execution system(MES), and describes major issues and solving elements to establish a MES system for cloud services. Also, it proposes business intelligence(BI) systems for building a manufacturing information system to have the optimized production flow and to respond appropriately to consumer market.