• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.570-577
• /
• 2018

Composite pressure vessels made through filament winding are widely used in various fields. Numerous studies regarding composite pressure vessels have been conducted in the automotive industry to improve the space efficiency of trunks as well as the fuel efficiency. Compared with steel liquefied petroleum gas (LPG) vessels used in the conventional LPG vehicles, the use of type 4 composite pressure vessels has advantages in terms of reduction of the weight of vehicles. This study focused on development of type 4 composite pressure vessels that can be installed in the spare tire well. Those type 4 composite pressure vessels are designed with torispherical dome shapes instead of geodecis dome shapes because of the space limitation. To reduce deformation due to the stresses in the axial direction of the vessels, thereby securing the safety of the container, the reinforcing bar concept was applied. A structural analysis software, ABAQUS, confirmed the effect of the reinforcing bar on the axial deformation through the type 4 composite pressure vessel. As a result, the final winding angle of the composite layer was analyzed by applying $26^{\circ}/28^{\circ}/26^{\circ}/28^{\circ}/26^{\circ}/88^{\circ}$ The tensile stress was 939.2 MPa and the compressive stress was 249.3 MPa.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.184.2-184.2
• /
• 2010

With growing of wind turbine industry, offshore wind turbine system is getting more attention in recent years. Foundation of the offshore wind turbine plays a key role in stability of whole system. In this work, 5MW NREL reference wind turbine with rated speed of 11.4m/s is used for load calculation. Wind loads and wave loads are evaluated using GH-Bladed (Garard Hassan) and FAST (NREL). Additionally, FE simulation is carried out to investigate the wave effect on the support structure. Meanwhile, this work is trying to systematize and optimize load cases simulation for foundation of wind turbine system.

• 한국조리학회지
• /
• 제13권1호
• /
• pp.204-211
• /
• 2007

In order to develop a pot lid that would not overflow, three parts were created, each different in size. One cover (A") had a small hole (dia. 10 cm) for the vapor to escape (dia. about 2.5 mm). Another, cover A' had a medium-sized hole (dia. about 5 cm) for the vapor to escape. Cover A (dia. 300 mm, $120\;mm^H$) had a large hole (dia. 100 mm) for the vapor to escape. Because the new cover was partially open while soy paste solution cooking, it showed that it could not only prevent overflow, but also extend the burning approaching and salinity increase time, reducing both cooking time and the amount of energy necessary to cook.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.286-289
• /
• 2008

Wind turbine industry is booming and spending a lot on research for improving the performance of its present machines and increasing their capacity. Wind turbine requires service life of about 20 years and each components of wind turbine requires high durability, because installation and maintenance costs are more expensive than generated electricity by wind-turbine. So the design of wind turbine must be verified in various condition before production step. For this work, high reliability model for analysis is required. Drivetrain model is modeled by multibody dynamic modeling method. The model constituted with rotor blades, hub, main shaft, gear box, high speed shaft and generator. Natural frequency and torsional stiffness of drivetrain are calculated and analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.107-110
• /
• 2008

The price of natural gas import continues to rise, as well as its domestic consumption rate. This research examined the economic feasibility of domestically developing and producing gas hydrate to substitute imported natural gas. Today, the technology to commercially produce gas hydrate is still lacking; however, if the gas hydrate is able to be commercially produced domestically and replace imported natural gas, the annual economic benefit for the Republic of Korea would be 211 - 833 USD/ton. From the industry's point of view, gas hydrate is a high value investment since one can expect an annual profit of over 150USD/ton. The commercial value of gas hydrate development will increase as long as the natural gas market continues to expand and as the increase of natural gas consumption remains steady. With further development of technology, one can anticipate an even higher expected return on the investment.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2445-2450
• /
• 2011

화학공정 모사 소프트웨어인 HYSYS를 사용하여 Reformate 분리 공정을 열복합 증류탑으로 설계하였다. 열복합 증류탑 설계 방법을 자세히 하였고, 모사 결과를 일반 증류탑과 비교한 결과 제시된 열복합 증류탑 설계 방법이 간단하고 효율적이라는 것을 알 수 있었다. 같은 tray 단수하에서 열복합 증류탑은 일반 증류탑 대비 약 12.2% 에너지가 절약됨을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1338-1339
• /
• 2011

Recently the wind turbine generating systems are increasing world widely. This type of systems will change the nation's energy environment which largely depends on the fossil fuels. It will also bring new problems to the power industry and the customers. The expected problem is the voltage and frequency stability of the power distribution network, when a wind turbine generating system is connected to the line. It becomes necessary and important to evaluate their impact on the electrical network stability. This paper shows the electrical data measurement and analysis of a inductive wind turbine generator affecting the power quality problem of the distribution line.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.543-548
• /
• 2016

Live-line maintenance for electric power lines is very dangerous because of their ultra-high voltage environments and the risks of falling from heights. Recently, drone technology has been spotlighted due to its maneuverability and stable controllability, and has been being applied to maintenance works in the electric power industry. This paper presents a new type of drone that can be transformable by introducing biomimetics to its mechanism and can run on an overhead ground wire as well as it can fly. Its technical feasibility was confirmed through experiments.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.889-895
• /
• 2014

Korea electric power industry had been under vertical monopoly but is typically getting restructured for free competition. An ideal pricing system under the competitive market system is 'unbundled pricing system' and 'marginal pricing system', but the current pricing system still adheres to the traditional bundled system and the average cost pricing system. Especially, progressive electricity rates for residential use reflect governmental policy-making which is focused on income redistribution & welfare, industrial supports and energy saving. This study proposes new and reasonable residential electricity pricing systems which are Time-Of-Use (TOU) and Real-Time Pricing (RTP) to reflect variations in the wholesale price of electricity. It also presents examples of various tariffs for residential electricity pricing systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.138-140
• /
• 2007

These days, robot-industry development requires a new motor technology. Robot system is more complex than the other machine ones. They need the simplicity and light weight as robot systems. Moreover, They have to become a high energy efficiency machine. For these reasons, in this paper, the 3-degrees of freedom permanent-magnet spherical motor is proposed instead of existing ones. The proposed motor model is analyzed by using FEA(Finite Element Analysis), for comparing the results, torque of the motor is simulated by derived torque function.