• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.89-93
• /
• 2002

Resistance performance of 6.67 G/T class fishing vessel is experimentally investigated in low and middle speed ranges to find out the effect of a new chine. The tests are performed for four different cases in the circulating water channel(CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics. The results show that the new chine can be one of the effective device to reduce the resistance.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.7-16
• /
• 1996

The air-flow dyeing machine is a new type of dyeing machine. Which is an energy saving type to be able to dye the fabrics with the lowest liquor ratio and in shorter time. This machine is operated with an aerodynamic system rather than a hyd raulic system for traditional jet or overflow dyeing. An air-flow dyeing machine(Green-flow) by the use of aerodynamic technology was developed and compared with the Luft-roto machine made by Thies Company, Germany, in this study. Three samples were dyed with both machines under the same dyeing conditions and color fastness, dyeing levelness, drapability, and mechanical properties of these samples were compared. The results were as follows; Both machines have almost the same dyeability. The dyeability was good at liquor ratio of 1: 3.5 and the speed of 450yds/min. The order for drapability was Crepe de Chine > Cool Peach > Charmeuse. Except for the color fastness of sublimation being below class 4, most color fastness of samples dyed with Green-flow m/c were above class 4. The maximum speed was 510yds/min. for Crepe de Chine and the standard deviation of K/S value was lower for Charmeuse and Cool Peach when employed on the "Green-flow" machine and lower for Crepe de Chine when employed on the Luft-roto machine. Comparing with dyeing of the Green-flow machine and that of the Luft-roto machine, the RT of the Charmeuse was found to be higher with the Green-flow machine and thus the sample had an improved wrinkle recovery. LT and WT of Cool Peach were higher, and shear properties(G, 2HG, 2HGS) of Crepe de Chine were higher, both turning out as suitable for clothing. clothing.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.69-74
• /
• 2016

A new wave-piercing-type high-speed planing boat without a chine was developed, and its basic performance was investigated in a model test, including the resistance, trim, and sinkage. The maximum speed of the developed ship was 35 knots. The hull form was developed by combining a VSV (very slender vessel) and TH (transonic hull), which have large deadrise angles at the bow. The main dimensions were estimated by a statistical approach using actual ship data. The effect of a side fin attached at the stern near the water line was investigated from a resistance point of view. It was found that the developed hull form showed the possibility of a new concept for a high-speed planing hull without a chine, and the side fin played an important role in increasing the resistance performance by controlling the trim and sinkage in the high-speed range.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.7 no.1
• /
• pp.57-78
• /
• 1970

The Korea inshore fishing boats are the size up to 30G.T., and their construction commonly employs the traditional wide wooden planking. Nevertheless, the hull forms have been developed with chine-type straight-framed sections which give developable surface party, but not on the whole: especially not on the whole portion of the hull are preferable for them. Considering many merits in the boat construction, the author, excluding cases of the FRP construction by hand lay-up or spray-up method and of the ferro-cement construction, finds out no reasons to depart from the chine-type hull forms of a developable surface in future development of their hull forms, too. In this report, the author proposed new designs of the developable hull surface for four typical boats forming the main structure of Korean inshore fishing fleets; 5G.T.-class multi-purpose boat, 10G.T.-class angling and longlining boat, 20G.T.-class drift and gill netters, and 27G.T.-class stow netters, and presented the tank test results on their propulsion resistance. The tank test had two purposes; one is to present the powering schedule of the new designs and the other to investigate the resistance characteristics of this kinds of boat in comparision with those of equivalent round-type boats at operational speed ranges. Between the both types of the boat no material differences in powering are expected. Hence, the author is confident of that saving in the construction cost of the developable hull over that of the round-type boat may result in considerable contribution to the over-all boat economy.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.177-181
• /
• 2003

Despite various forms have been developed and applied to ship hull forms, the superiority of hard chine type over other forms of fishing boat has been recognized so far. As one of the ways of forms for new concept fishing boat, this paper presents the result of a performance evaluation for newly developed forms of hull, appendage and deck house, which features that have esthetic forms.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.259-265
• /
• 1997

The new concept of hull form for G/T 19 ton class off-shore long liner was studied with the support of special research fund of Korean Ministry of Science and Technology. Newly developed hull form of semi-twin afterbody combined with part. curvilinear type forebody shows outstanding improvement in resistance performance point of view compared with hard chine form, especially at the range of high speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.731-738
• /
• 2017

Twin-hulls frequently incur structural damage at connecting members between the hull and deck induced by pitching motions during voyages. so, reasonable reinforcement is necessary around vulnerable spots such as corner knuckle, the chine bottom and inner hull. Since guidelines for structural design are not clear, engineers often respond by reinforcing plate thickness, changing stiffener sizes and reducing frame spacing, etc. These members constitute about 85 % of the longitudinal dimensions of the ship, so it is necessary to locally reinforce certain points to minimize weight stress, and also solve construction cost problems while securing the freeboard margin. Therefore, we developed a new program by analyzing the structural design procedures for the twin car-ferries based on Korean Register of Shipping (KR) High Speed Craft Rules, identifying items that need to be added. In order to ensure the reliability of buckling estimations for procedures and design programs, we conducted a comparative study with other standards and confirmed that differences were minimal.

• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.32-47
• /
• 2002

This study is a descriptive comparative investigated one to analyze nursing education system and curriculum of Korea and China trans-culturally. 1) Education System The basic level of nursing education in Korea consisted of 65 3-year- junior college of nursing (7379 students) and 48 4-year-bachelor of nursing college (2345 students) in 2000 showing more 3-year-junior college of nursing and its students. In China, western nursing as well as Chinese nursing education system were operating. In 2000, 501 western school of middle technical nursing, 29 school of middle technical nursing of middle level education, and 89 3-year western and 24 Chinese junior college of nursing, and 42 4-year western bachelor of nursing college and 10 Chinese of high level education have been established. The presence of Chinese school of middle technical nursing system seemed to be in slower development in nursing than Korea, but that of Chinese nursing education seemed to be advanced with its national identification prior to Korea. Post graduate continuous education for RN-Diploma and RN-BSN program has been opened as in Korea. The Hosa(護士) system in school of middle technical nursing in China reflects lower level of education than Korea. But it can be a merit, other than in Korea, without nurses aids, when they are acting under supervision of nurses and led by them, and there presents a special course for promotion up to high level education. Graduate school in Korea is divided into general type opening a curriculum for MS in 1960 and as of 2000, 21 general types for majoring in nursing. The PhD course in Korea was established in 1978, and after that the PhD courses have been opening in 14 universities at present. China established master degree course in 1991 and as of 7 colleges are ongoing, and the doctoral course is now under planning, resulting slower development than Korea. 2) Education of theory and clinical practice in Korea and Chine (1) Korea's 3-year junior nursing college have 51 subjects, 49 subjects in China, which was not different. China was following education of ideology and medical. 4-year Bachelor of Science College has 92 subjects in Korea with cultural subjects and essential major studies/elective in theory education in Korea, while 63 subjects in China, showed wider selection in Korea's education. (2) Korea's 3-year and 4-year nursing colleges performed clinical practice education parallel with theoretical education for a certain period, block or theory/practice system. While China's 3-year and 4 or 5-year-colleges educated the theory first and then practice for one year in the last grade, integrating each situation of the departments and the theory. (3) Korea's oriental nursing theory in nursing education was performed in 28 colleges of 65 nationwide ones of 3-year junior nursing colleges, but only one school was educating clinical practice. In 4-year bachelor of nursing colleges, the oriental nursing theory was done in 14 among 48 investigated. And 1-4 subjects of them were doing, and 4 schools performed of clinical practice, showing more reinforced than the junior colleges. China's 3-year and 4-5-year western nursing colleges taught two subjects of Chinese medicine nursing. China's 3-year & 4-5-year College of Chinese medicine nursing, theory of Chines medicine nursing education taught eight subjects. (4) 5-year colleges of Chinese medicine western integrated nursing, theory of Chinese medicine nursing education consisted of twelve Chinese medicine nursing subjects and two of Chinese medicine western integrated nursing subjects. China was tempting a new development of a pattern of Chinese medicine nursing subjects reinforced. 3) The verification of Korean and Chinese nurse's license. The verification test of Chinese nurses license is differentiated at the level of education other than in Korea. Expire date is 2 years and a qualified test must be done to a renewal. And the continuing education hours are 72 per year, which is more enforced than Korean nurses (10 hours a year). In accordance with WTO regulations, we should prepare for opening foreign hospital, educating oriental nursing subjects. And on this, it is recommendable to settle a basic frame research to run the oriental nursing practice ongoing. 1. It is desirable to develop the oriental nursing subjects to apply its idea to the western nursing and differentiate Korean nursing. 2. It is desirable to certify oriental nurse's characters, to expand and develop the nursing areas to practice it, and to establish the oriental nursing system. 3. It is expectable to promote Korean nursing specialization to develop the oriental nursing as a professional and to create its demand.