• Journal of Ocean Engineering and Technology
• /
• v.32 no.3
• /
• pp.192-201
• /
• 2018

In this study, a qualitative evaluation of the morphological changes in the seabed surrounding Jinwoo-Island due to the construction of the new Busan port were determined through a numerical simulation. Various scenarios for the discharge of the Nakdong river estuary dam and construction stage of the new Busan port were established and utilized for an indirect and qualitative investigation through simulation using the numerical model implemented in this study. It was concluded through a qualitative study that the morphological changes in the seabed surrounding Jinwoo-Island were typical estuary seabed changes due to the discharge of the Nakdong river estuary dam and waves from the open sea. The effects from the construction of the new Busan port were relatively small.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.18-28
• /
• 2021

This study surveyed how retirees' evaluation of starting food service business affects the effectiveness their new business and quality of life, based on personal factors such as entrepreneurship and business-starting capability and environmental factors by using questionnaires. Bootstrapping was carried out in order to find out factors affecting rapidly changing new business environments and retirees' initial intent to start a business so as to verify basic hypothesis about relation between retirees' evaluation of starting food service business (social, economic, and psychological effects) and the effectiveness of their new business and quality of life and confirm whether the effectiveness of the new business acts as a medium between the evaluation of starting food service business and quality of life. In addition, PLS-MGA was performed in order to verify whether the correlations among test factors can be varied according to the kind of job the target retirees had. Having examined the basic thesis, it was found that social and economic factors had significant positive effect on the effectiveness of the new business, and social and psychological factors had significant positive effect on the quality of life. Having analyzed whether the effectiveness of new business acted as a media between evaluation of starting food service business and quality of life, there was no significant effect as a medium. Having studied whether the kind of job of the retirees controlled or affected the relations among evaluation of starting food service business, effectiveness of new business and quality of life, the results were as follows: in the office job retiree group, the greater economic factor led to increase of effectiveness of new business, while social and psychological factors influenced the quality of life; In the physical labor group, the higher social factor resulted in higher effectiveness of new business, which showed significant positive effect on the quality of life. Having researched about which element is considered to be most important in starting food service business, the most important element was found to be dish/menu, followed by staff management, accounting management, business management, and service education. Having analyzed relation between accomplishment and important consideration for starting food service business, "managers with entrepreneurship," "appropriate distribution of time to prepare for starting business," and "operation of practical field education programs" showed higher importance compared to the degree of satisfaction, so it is needed to more concentrate on the above matters. This study intends to raise retirees' awareness of starting business and help them live better life based on the analysis results, and further suggest detailed mechanism and specific operations of factors affecting retirees' decision making on starting business, such that they can use the information as basic materials to make better choices that can lead to successful business.

• Bulletin of Food Technology
• /
• v.24 no.3
• /
• pp.428-438
• /
• 2011

• 수도
• /
• v.24 no.5 s.86
• /
• pp.16-28
• /
• 1997

As sewerage works has become one of the major public works in Korea, the employment of advanced and more appropriate sewerage technology has become essential to improve the efficiency of sewerage works. During last 10 years, the Korean Government has made tremendous amount of investment on sewerage works so that treatment plants in 58 cities have treatment capacity which is equivalent to 52.8% of total daily sewage generation in Korea. This remarkable development, however, has heavily depended on one technology, the conventional activated sludge process as more than 95% of the existing plants employ this process, Recently, the Korean Government and local authorities have plans to introduce more appropriate sewage treatment technologies and research and development in this area has become very active. To encourage employing new and appropriate technologies, however, the proper technology evaluation and verification program for new process is needed. The public sector should play a key role in this program since the sewerage works is one of the major public works. In this paper, the technology evaluation and verification programs related with sewerage facilities in the US and Japan are briefly reviewed. The Innovatived and Alternative Technology programs which was operated by US EPA until recently and Environmental Technology Verification(ETV) program which was commenced in 1995 are introduced. The technology verification programs operated in Japan and also in Korea are also reviewed in this paper to propose a future direction for development of the appropriate evaluation and verification system.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.193-201
• /
• 2006

The Evaluation system of Excellent Construction Technology has been operated for 15 years from 1990 in Korea. 443 technologies have been certified as Excellent Construction Technology(ECT) and those ECTs are adapted over 20,000 times into the construction projects. As a result of investigation, new technology evaluation system became a stable stage because new technology evaluation system has assigned about 433 and also applied more than 20,000 times in construction sites in 2004. However, it was indicated to a large problem that there aren't still detail criteria of cost assessment for using ECTs. Therefore, we analyzed the status and problems of the cost of using ECTs and suggested some useful ideas which are reviewed by various aspects. Specially we suggested specified criteria for the cost assessment of using ECTs. It is based on the scheduled construction cost and determined the rate $({\bullet}{\cdot})$ of using ECTs. To adapt ECTs into construction projects nationwide not only it is very important to certify better new technologies but also it is required to make the criteria of cost assessment for using ECTs.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.37-44
• /
• 2004

Advancement in electronic technology has given office workers a new freedom, and a new meaning to workplace flexibility. Actually non territorial workplace has different space elements from general and conventional workplace in terns of interior design and architecture even organization management. The purpose of this study is on the establishment of an evaluation model for non territorial workplace that may be used, practically on the spot. For the establishment of non territorial workplace evaluation model, it is ahead of the study of the feature and the type of none territorial workplace and the research for existing office evaluation technique by Preiser and Vicher. And then the evaluation model for none territorial workplace which is composed three parts that is user's importance, provider's importance and user' satisfaction related fact of workplace. It is constructed by 6 factors which are physical, psychological, workplace environmental, communication, exterior environment, and space managing system therefore each factors has scrupulous elements therefore the total elements are 40. To make more confidence the evaluation model for non territorial workplace, it requires that study continually through the survey with the non territorial workplace evaluation model.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.272-279
• /
• 2018

Since the introduction of new health technology assessment in 2007, benefit coverage process of health insurance related to new health technology has become an upgraded system through the evidence-based decisions. As a result of enforcing this system for 10 years, however, there have been several rising concerns. It needs to support the insufficient evidence of medical technologies, introduce reassessment system for post management of market entry technologies, and improve evaluation methods and process. In addition, there is the possibility of emerging an unheard-of medical technology, fused various categories like artificial intelligence, robot, information technology, physics and life science in the fourth industrial revolution. Now, new updated system introduced to improve new technology assessment, such as 'limited health technology assessment system,' 'system for postponement of new health technology assessment,' 'one-stop service system,' and 'integrated operation of approval for medical devices and new health technology assessment.' Therefore it needs to prepare the improvement plan for new health technology assessment to be established more advanced system, and we have to resolve concerns by communication with various healthcare experts and patients now and for ever.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.192-201
• /
• 2011

The optimal evaluation algorithms for voltage regulation in the case where new dispersed sources are operated in distribution systems are studied. Handling the interconnection issues for proper voltage managements are often difficult and complicated because professional skills and enormous amounts of data during evaluations are needed. Typical evaluation algorithms mainly depend on human ability and quality of data acquired, which inevitably cause the different results for the same issue. Thus, unfair and subjective evaluations are unavoidable. In order to overcome these problems, we propose reasonable and general algorithms based on the standard model system and proper criterion, which offers fair and objective evaluation in any case. The proposed algorithms are divided into two main themes. One is an optimal algorithm for the voltage control of multiple voltage regulators in order to deliver suitable voltage to as many customers as possible, and the other is a proper evaluation algorithm for the voltage management at normal and emergency conditions. Results from a case study show that proposed methods can be a practical tool for the voltage management in distribution systems including dispersed sources.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.240-252
• /
• 2015

In the original licensing application for the prototype fast-breeder reactor, MONJU, the event progression during an unprotected loss of flow (ULOF), which is one of the technically inconceivable events postulated beyond design basis, was evaluated. Through this evaluation, it was confirmed that radiological consequences could be suitably limited even if mechanical energy was released. Following the Fukushima-Daiichi accident, a new nuclear safety regulation has become effective in Japan. The conformity of MONJU to this new regulation should hence be investigated. The objectives of the present study are to conduct a preliminary evaluation of ULOF for MONJU, reflecting the knowledge obtained after the original licensing application through CABRI experiments and EAGLE projects, and to gain the prospect of in-vessel retention for the conformity of MONJU to the new regulation. The preliminary evaluation in the present study showed that no significant mechanical energy release would take place, and that thermal failure of the reactor vessel could be avoided by the stable cooling of disrupted-core materials. This result suggests that the prospect of in-vessel retention against ULOF, which lies within the bounds of the original licensing evaluation and conforms to the new nuclear safety regulation, will be gained.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.184-191
• /
• 1994

In this study, the product design technology to facilitate the assembly automation is developed. First, checkistis are developed to analyse weakpoints which make assembly automation difficult. The weakpoints of assembly automation can be redesigned by using design rules for assemblability which are systematized in this research. In addition, the assemblability of product can be evaluated qualitatively with the new developed assembly evaluation method. This evaluation method is performed in the respect of the component parts, the assembly method and the assembly motion.