• Geophysics and Geophysical Exploration
• /
• v.15 no.3
• /
• pp.136-143
• /
• 2012

In this case study, we present the various and consistent processing techniques for the reasonable interpretation of aeromagnetic data. In the processing stage, we especially focused on the three major respects. First, in the low latitude area, severe artifacts are occurred as a result of reduction to the pole technique. To overcome this problem, variable alternative methods were investigated. From the comparison of each technique, we concluded that energy balancing method gives more fruitful result. Second, because of limited a priori information, it is nearly impossible to employ detailed geological survey due to wide and thick spreading of soils in the survey area. So we especially investigated the new techniques such as extracting slope, curvature and aspect information mainly used in GIS field as well as conventional methods. Finally, by using the Euler deconvolution, we extracted the depth information on the magnetic anomalous body. From the synthetic analysis between depth information and previous discussed results, the detailed future survey area was proposed. We think that a series of processing techniques discussed in this study may perform an important role in the domestic and abroad resource development project as a useful guideline.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.505-513
• /
• 2021

Recently, housing prices in metropolitan areas is also increasing in the UK and Australia. Their governments are trying to solve this problem by the housing development in the quarry sites near cities. The cases reviewed in this study, Erith Hill Quarry (The Quarry), Plymstock Quarry, Lilydale Quarry (Kinley), and Bombo Quarry are the mixed-used development cases in the closed quarry sites through the urban planning system. In the UK, the local government uses the urban planning scheme such as the planning permit system, section 106. The local government permits the quarry site development on the condition that it provides necessary public facilities, such as schools and affordable housing for the local community. In Australia, local governments use up-zoning permission rights to convert land uses in quarries from industrial to mixed-use. Development plans have to include urban infrastructure and open space in addition to affordable housings. In the case of Australia, establishing a development plan in advance and filling the quarry pit with overburden through a phased development is expected to have the effect of reducing the project cost. Both countries think that developing brownfields, such as quarry sites, is a more sustainable and eco-friendly development from the perspective of future generations than developing new green fields. Such a perspective of the UK and Australia will be able to give policy implications for our slightly rigid urban development system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.491-504
• /
• 2021

Gwanghwamun Gate of Gyeongbokgung Palace was dismantled and relocated during the Japanese colonial period, destroyed during the Korean War, reconstructed with reinforced concrete in 1968, and finally erected at its present location in 2010. A pair of Haechi statues located in front of Gwanghwamun was dismantled and relocated several times, and the statues have yet to be returned precisely to their original positions. This study assesses the historical accuracy of their current placement under the Gwanghwamun Square Restructuring Project of the Seoul Metropolitan Government and the Cultural Heritage Administration based on archival photos from the early 1900s, and proposes a method to estimate the original positions of the Haechi through image analysis of contemporary photographs and recent digital camera photos. We estimated the original position of the Haechi before the Japanese colonial period by identifying the shooting location of the archival photo and reproducing contemporary photographs by calculating the angle and distance to the Haechi from the shooting location. The leftmost and rightmost Haechi were originally located about 9.6 m to the east and 7.4 m to the north and about 1.9 m to the west and 8.0 m to the north, respectively, of their current location indicators. As the first attempt to determine the original location of a building and its accessories using archival photos, this study launches a new scientific methodology for the restoration of cultural properties.

• Genes and Genomics
• /
• v.40 no.12
• /
• pp.1351-1361
• /
• 2018

A new cold tolerant germplasm resource named glutinous rice 89-1 (Gr89-1, Oryza sativa L.) can overwinter using axillary buds, with these buds being ratooned the following year. The overwintering seedling rate (OSR) is an important factor for evaluating cold tolerance. Many quantitative trait loci (QTLs) controlling cold tolerance at different growth stages in rice have been identified, with some of these QTLs being successfully cloned. However, no QTLs conferring to the OSR trait have been located in the perennial O. sativa L. To identify QTLs associated with OSR and to evaluate cold tolerance. 286 $F_{12}$ recombinant inbred lines (RILs) derived from a cross between the cold tolerant variety Gr89-1 and cold sensitive variety Shuhui527 (SH527) were used. A total of 198 polymorphic simple sequence repeat (SSR) markers that were distributed uniformly on 12 chromosomes were used to construct the linkage map. The gene ontology (GO) annotation of the major QTL was performed through the rice genome annotation project system. Three main-effect QTLs (qOSR2, qOSR3, and qOSR8) were detected and mapped on chromosomes 2, 3, and 8, respectively. These QTLs were located in the interval of RM14208 (35,160,202 base pairs (bp))-RM208 (35,520,147 bp), RM218 (8,375,236 bp)-RM232 (9,755,778 bp), and RM5891 (24,626,930 bp)-RM23608 (25,355,519 bp), and explained 19.6%, 9.3%, and 11.8% of the phenotypic variations, respectively. The qOSR2 QTL displayed the largest effect, with a logarithm of odds score (LOD) of 5.5. A total of 47 candidate genes on the qOSR2 locus were associated with 219 GO terms. Among these candidate genes, 11 were related to cell membrane, 7 were associated with cold stress, and 3 were involved in response to stress and biotic stimulus. OsPIP1;3 was the only one candidate gene related to stress, biotic stimulus, cold stress, and encoding a cell membrane protein. After QTL mapping, a total of three main-effect QTLs-qOSR2, qOSR3, and qOSR8-were detected on chromosomes 2, 3, and 8, respectively. Among these, qOSR2 explained the highest phenotypic variance. All the QTLs elite traits come from the cold resistance parent Gr89-1. OsPIP1;3 might be a candidate gene of qOSR2.

• Cross-Cultural Studies
• /
• v.53
• /
• pp.193-218
• /
• 2018

In this essay, I examine the interactions of chronotopes in the narrative of Gangnam Blues, a film written and directed by Yu Ha and released in 2015. Bakhtin's chronotope, the connectedness of temporal and spatial relationships in literary narratives, provides the background for the representability of events and becomes the organizing center for the events. Each chronotope offers a different way of acting, interacting and understanding experience, and chronotopes can interact with each other in a single text or between the reader and the represented world. Gangnam Blues is a gangster movie, first of all, showing an individual's illusion of an unlimited possibility for achieving wealth and power. At the same time, the film describes the government's project to transform Gangam, a rural area in the south of the Han, into a new downtown and residential area for Seoul. As the world in the narrative and the world of the author or the reader are all chronotopic, we can see the interactions of chronotopes between the narrative of an individual and the historical narrative, as well as between the narrative about the beginning of Gangnam and the audience's perception of the present Gangnam. In this film, the main character's ambition is shown as part of the social desire for rapid economic achievements in the 1970s, along with high social mobility. The social desire can be explained as envy, as it is fueled by social comparisons and competitions. The main character's pursuit of money and power through the possession of Gangnam land overlaps with the envious desire for the present Gangnam shared by many. The individual's exceptional ambition and violence are not fully examined in this text. Moreover, the film's dependence on the feelings of envy to represent the individual's choice and violence can be a symptom of the lack of critical distance from social desire and envy.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1073-1090
• /
• 2018

Since the domestic utility tunnels were built mainly in the development project of the new city, they are all in the form of cut-and-cover box tunnel. But, in the case of overseas construction of utility tunnels for existing urban areas, the bored tunnel types are mainly adopted. It is reasonable to install bored tunnels in a downtown area because it is difficult to block the roads or install bypass roads due to heavy traffic and civil complaints. In order to activate the utility tunnels in bored type, it is necessary to secure optimized cross-sectional design technology considering the optimal supplying capacity and mutual influencing factors (Thermal Interference, electrolytic corrosion, efficiency of the maintenance, etc.) of utilities (power cables, telecommunication cables, water pipes, etc.). The optimal cross-section design method for bored utility tunnels is ultimately to derive the optimal arrangement technique for the utilities. In order to develop the design methods, firstly, the cases of tunnel cross-section (Shield TBM, Conventional Tunneling) in overseas shall be investigated to analyze the characteristics of the installation of utilities in the section and installation of auxiliary facilities, It is necessary to sort out and analyze the criteria related to the inner cross-section design (arrangement) presented in the standards and guidelines.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.251-291
• /
• 2009

Due to the trend toward computerization of business services in public sector and the push for e-government, the volume of records that are produced in electronic system and the types of records vary as well. Of those types, dataset is attracting everyone's attention because it is rapidly being supplied. Even though the administrative information system stipulated as an electronic record production system is increasing in number, as it is in blind spot for records management, the system can be superannuated or the records can be lost in case new system is developed. In addition, the system was designed not considering records management, it is managed in an unsatisfactory state because of not meeting the features and quality requirements as records management system. In the advanced countries, they recognized the importance of dataset and then managed the archives for dataset and carried out the project on management systems and a preservation formats for keeping data. Korea also is carrying out the researches on an dataset and individual administrative information systems, but the official scheme has not been established yet. In this study the items for managing archives which should be reflected when the administrative information system is designed was offered in two respects - an identification method and a quality requirement. The major directions for this system are as follows. First, as the dataset is a kind of an electronic record, it is necessary to reflect this factor from the design step prior to production. Second, the system should be established integrating the strategy for records management to the information strategy for the whole organization. In this study, based on such two directions the strategies to establish the identification for dataset in a frame to push e-government were suggested. The problem on the archiving steps including preservation format and the management procedures in dataset archive does not included in the research contents. In line with this, more researches on those contents as well as a variety of researches on dataset are expected to be more actively conducted.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.203-209
• /
• 2019

Special Act on Regulatory Freedom Zone and Regional Special Development Zonet" introduced a new type of 'Freedom Special Zone of Regulation' that is legally distinguished from the existing Special Districts for Regional and Regional Development to support the innovative and strategic growth of the areas, and even passed a number of legal grounds for providing innovative regulations for regional development projects or regional strategic industries within the Special Districts. Starting with the bill legislation proposed by The Parliament Members, Kim Kyung-soo on behalf of 33 suggestors, Choo Kyung-ho, Jung Sung-ho and Hong Il-pyo submitted the bill legislation on behalf of 10 to 12 proposers, respectively. As a major matter of issue, the purpose, designation, scope of application, promotion system, application of A Bill of Three kind on Regulatory Innovation, and Balanced National Development, many kind of regulation as like types of menu, special cases, punitive regulations, and so on have been argued until the end of the bill proposed from the beginning. In this study, the differences between the bill suggested by the Parliament members and bill approved already are to be compared and analyzed to confirm how the items on issue were reflected for the bill finally and to draw up measures for the correct operation of the special regulations.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.114-123
• /
• 2019

Tracking ICT applications on construction business processes is critical to the success of ICT-applied construction projects. Existing IDEF0 is a representative modeling method for visualizing and analyzing business processes. It defines a construction production process into a visual information model, hence, encouraging the project participant to understand the activities, their deliverable, and control flow of the process. However, IDEF0 dose not lend itself to ICT-applied construction processes, because it does not provide a mean to define how, in what order, by which each and every activity that ICT applied implements. This paper presents a new business modeling method that improves the traceability of ICT application (IAMB: ICT Application tracking Model for Business process) for construction management. The IAMB contributes to handle the sophisticated features of construction management processes to which ICT are applied. The method categorizes the process into three types: management, construction, and information exchange. The validity of IAMB was confirmed by analyzing the performance when it is used for tracking each modeling step of lift reservation process which making use of ICT. The test case provides an admissible evidence that the method encourage to define who, what, how, which order, and by which ICT tools the construction process exchanges production information.