• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.45-66
• /
• 2016

Firms can make scale of economy and scope of economy by internalizing and using new advanced technology and knowledge from technology cooperation network, decrease risk and cost with partner firm of technology cooperation network, and increase market advantage of product & strengthen firms' position in the market. Due to the advantages of technology cooperation network, the related studies have focused on the positive effect of technology cooperation network. However, the related studies investigating the relationship between technology cooperation network and firm performance have only examined the role of technology cooperation network. Safeguarding mechanism, relationship learning, and relationship performance are categorized into the process of technology cooperation network, and this categorization is applied as resources, capability, and performance by resource based view. The empirical results are reported as belows. First, relationship specific investment and relationship capital positively affect on relationship learning as capability. Second, information sharing, common information understanding, and relationship specific memory development positively affect on long-term orientation, but information sharing has no impact on efficiency and effectiveness. Third, relationship specific investment positively affects on relationship capital and efficiency and effectiveness have positive effects on long-term orientation. Applying technology cooperation network in asymmetric technology dependency with resource based theory, this study suggested the importance of both safeguarding and relationship learning by investigating the relationship among safeguarding, relationship learning, and relationship performance. And it is worthy that this study investigated how firms' behavior change affects relationship performance in the relationship of technology cooperation partner.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.478-486
• /
• 2013

The purpose of this study was to analyze consumer consumption and product concept demands of Korean rice-wine. An online survey, conducted from April 28, 2010 to May 6 2010, targeted 200 consumers in Seoul and the Gyeonggi-do area. More than half of the respondents (51.3%) drank rice-wine because of the taste. The common reasons for dissatisfaction with rice-wine were hangovers (35.7%) and taste (16.9%). From analyzing rice-wine preferences, the most preferred ingredient was rice (57.8%), while the most preferred aroma and taste was derived from the fruit (48.7% and 58.4%, respectively). The most common methods consumers observed for promoting rice-wine consumption were the "development and management of rice-wine brands" (59.7%), and "continuous promotion" (44.8%). The most important attributes of a rice-wine product included its taste (4.60), followed by its quality (4.41) using 5-point Likert scale. An importance-performance analysis (IPA) was performed for the 17 attributes of rice-wine and identified targets for product management strategies, including the "usage of domestic ingredients", "ease of purchase", clarity of "product information", and "external image". Therefore, developing solid concepts in marketing strategy are required and may be achieved by understanding the consumer preferences and demands of rice-wine.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.734-741
• /
• 2016

Lily (Lilium davidii) is a high-yielding flowering plant. Besides roses and chrysanthemums, lily bulbs have long been used as food and in oriental medicine. However, the usage and value of cut lily bulbs has not been recognized. A bulb whose yield has been decreased is called a waste bulb, and a large amount of such bulbs is discarded every year. In this study, the functionality of waste bulbs from cut lilies was investigated to explore their potential use as a value-added product. We divided lily bulbs into two groups, one group with six varieties of new bulbs (Medusa, Siberia, Woori Tower, Yelloween, Le Reve, and Morning Star) used for cultivation and the other group with six varieties of waste bulbs (Medusa, Siberia, Woori Tower, Yelloween, Sorbonne, and Sheila). Physiological activities (${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl: DPPH) and 3-ethlbenzthiazolne-6-sulfonic acid (ABTS) radical scavenging capability and tyrosinase inhibiting activity), the amount of total as well as eight individual phenolic compounds (chlorogenic acid, epicatechin, rutin hydrate, p-coumaric acid, kaempferol 3-O-${\beta}$-rutinoside, phloridzin dihydrate, myricetin, and quercetin), and total flavonoid content were measured in the bulbs by high performance liquid chromatography. We detected high amounts of total phenol and total flavonoid as well as high DPPH and ABTS radical scavenging ability. More tyrosinase inhibiting activity was detected in the new bulbs than in the waste bulbs. However, both the new and waste bulbs showed a higher inhibitory activity than the standard (100 ppm ascorbic acid). Although the content of phenolic compounds differed among varieties, under the conditions of the experiment, the most abundant phenolics were epicatechins, followed by chlorogenic acid, and rutins. Overall, the waste bulbs had a higher content of these compounds than the new bulbs. Based on these results, we concluded that bulbs from cut lilies could be used as functional foods in the future and farmers could expect economic gain from the hitherto neglected waste bulbs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.5
• /
• pp.509-515
• /
• 2014

At the fuel processing system (FPS) of fuel cell vehicle, hydrogen recirculation blower (HRB) is used for the recirculation of remained hydrogen after reaction. In this paper, noise and vibration improvement of HRB is studied by changing design and control. It is checked the campbell diagram and critical speed for stability of rotor, and housing stiffness is improved using simulation of frequency response function (FRF). A method is suggested that can decrease the unbalance amount of the rotor and impeller which main source of noise and vibration. In order to reduce the noise during deceleration of blower, electrical braking is applied and tested the risk impact of durability. Founded the optimum switching frequency of the motor control, and reduced the idle rpm by increasing of aerodynamic performance. The superiority of paper is proved by measurement of the improved product's noise and vibration.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.1 s.7
• /
• pp.4-11
• /
• 2006

Masstige goods aimed consumers who want the fame and the emotional contents with reasonable price are presented overall and around the life style, from all the fashion items like bag and apparel to car, electric household, food, sports goods, furniture, toys, pets and performance of art, etc. Masstige casual, essentially different from the passed casuals which emphasized only price strategy, appeals to teenagers and young of twenties with a definite brand concept. Therefore masstige casual might be separated from business casual of a target aged thirties. Established celebrity brands have launched masstige brands matching the popularization of prestige goods. Armani Exchange from Armani, Marc by Marc Jacobs from Louis Vuitton are representative ones. DKNY from Donna Karen, MiuMiu from Prada, Paul smith Pink from Paul Smith can be added. These are relatively inexpensive, however the quality, design and shop's atmosphere are more exclusive than general brands. Consumers are over middle class and have a pride and fidelity to those brands. Leading Masstige trend, new luxury brands put the importance to the quality and aims middle class. To succeed in this field, companies should know exactly what consumers want, considering not only functional aspect but also emotional pleasure. Even though masstige has a weakness in pricing, it has to keep brand's proper benefit. Its price range could be wide to be in great demand but has to have elasticity and not to be expanded too much. Masstige industry should do its best not to damage original brand's identity. Forming family brand, like Armani made Georgic Armani, Emporio Armani and Armani exchange, system of parent brand and sub brands would be recommendable. From the launching time, masstige needs the effects to create a sensation and bring it into vogue and offer emotional value to the consumers.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.5
• /
• pp.426-439
• /
• 2020

This study surveyed Chinese elderly consumers to determine their purchasing behavior, importance, and satisfaction with HMR products in China. Three hundred and seventy people were surveyed: 184 males and 186 females aged 55 to 70 years. Two hundred and sixty-seven (72.25%) of the surveyed consumers had an average monthly income of 6,000 yuan or less, and 313 (84.9%) responded that they spend 3000 yuan or less on groceries per month. Three hundred and forty-eight (94.1%) showed a high interest in health management. Regarding the frequency of purchasing HMR products, most responded that they purchased HMR products more than once or twice a week, with a single purchase of 100 yuan or less for each purchase. The respondents preferred 2 or 3 serving packagings in a refrigerated form. For all forms of products, those made as in-house meals, outdoor meals, as a snack or night snack, for serving guests, for trips, camping, and on-the-go products, the participants mostly responded that they frequently purchased the product. When purchasing HMR products, the importance of hygiene, convenience in purchase accessibility, the freshness of ingredients, and an indication of the nutritional content were considered as a high rank. After purchase, the satisfaction of SNS and mobile application advertisements and promotions, amount per serving, take out convenience, and new menu were considered low-rank. The IPA results showed that marking the origin of the ingredients and new menu are areas needing improvement. The study results may be used as base data for developing elderly friendly HMR products and establishing its marketing strategies.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.643-658
• /
• 2018

In this paper, we introduce a new framework for running the finite element (FE) packages inside an online Loop together with MATLAB. Contrary to the Hardware-in-the-Loop techniques (HiL), in the proposed Software-in-the-Loop framework (SiL), the FE package represents a simulation platform replicating the real system which can be out of access due to several strategic reasons, e.g., costs and accessibility. Practically, SiL for sophisticated structural design and multi-physical simulations provides a platform for preliminary tests before prototyping and mass production. This feature may reduce the new product's costs significantly and may add several flexibilities in implementing different instruments with the goal of shortlisting the most cost-effective ones before moving to real-time experiments for the civil and mechanical systems. The proposed SiL interconnection is not limited to ABAQUS as long as the host FE package is capable of executing user-defined commands in FORTRAN language. The focal point of this research is on using the compiled FORTRAN subroutine as a messenger between ABAQUS/CAE kernel and MATLAB Engine. In order to show the generality of the proposed scheme, the limitations of the available SiL schemes in the literature are addressed in this paper. Additionally, all technical details for establishing the connection between FEM and MATLAB are provided for the interested reader. Finally, two numerical sub-problems are defined for offline and online post-processing, i.e., offline optimization and closed-loop system performance analysis in control theory.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.396-401
• /
• 2015

A door checker holds a car door at several opening angles and limits the maximum door opening, so that the door does not bump against to passengers. Recently, the performance of door checker becomes more important as the feeling of door opening and closing effects on the quality of a car. However, some of door checkers make squealing noise when they are used for ages, which causes consumer's complaints as well as decreasing commercial value of the product. In this study, after various experiments for the noise, we concluded that the major reasons of the noise are acceleration of wearing and loss of lubricant due to impurities in working parts. Therefore, we developed a new mechanism of door checker which can resolve the major reasons of the noise. The developed mechanism is effective to prevent inflow of impurities and loss of lubricant by locating working parts in the case. We also proved that the developed mechanism does not make any noise after the test of 50,000 times of operations.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.331-341
• /
• 2014

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.