• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.139-142
• /
• 2004

Business Activities usually comprises various types of business processes. However, most companies don't standardize the constituent processes and accumulate them in formal models, so that they have their limitations for efficient process management and continuous process improvement. Recently, in order to overcome the obstacles, the companies increasingly tend to introduce a BPM (Business Process Management) system. The BPM system functions as modeling dispersed processes over the companies definitely, running the processes and improving them. In addition, the BPM plays a role as a platform in which diverse business applications can be developed. Generally, it is prerequisite to define business processes clearly to run them in the BPM. Unfortunately, companies don't arrange the processes systematically, so that they have difficulty in the introduction and implementation of the system. In this paper, we introduce a new type of a business application to support the clarification of business structure and processes in the companies and facilitate the introduction of the BPM system. The new system is a 'job manual system' developed on the BPM platform. A process model modeled in the job manual system can be transported directly to the BPM system in which the model becomes an executable status. The new system's properties including this feature enable to manage business processes efficiently and help users of the both system perform relevant tasks conveniently.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.259-264
• /
• 2006

It is well known that the uncertainty of the covariance parameters of the process noise (Q) and the observation errors (R) has a significant impact on Kalman filtering performance. Q and R influence the weight that the filter applies between the existing process information and the latest measurements. Errors in any of them may result in the filter being suboptimal or even cause it to diverge. The conventional way of determining Q and R requires good a priori knowledge of the process noises and measurement errors, which normally comes from intensive empirical analysis. Many adaptive methods have been developed to overcome the conventional Kalman filter's limitations. Starting from covariance matching principles, an innovative adaptive process noise scaling algorithm has been proposed in this paper. Without artificial or empirical parameters to be set, the proposed adaptive mechanism drives the filter autonomously to the optimal mode. The proposed algorithm has been tested using road test data, showing significant improvements to filtering performance.

• 기술혁신연구
• /
• 제14권1호
• /
• pp.1-30
• /
• 2006

The purpose of this paper is to analyze the organizational design and management of product development in creating new product architecture by an established firm. For the purpose, the paper put up the organizational design in the process of PDA(Personal Digital Assistant) development of Sharp and Casio which were Japanese major PDA firms in 1990s. PDA is the product born through architectural change from Electronic Organizer. Prior research on the product architecture change and organizational adaptation emphasized that an established firm is difficult to adapt to new product architecture due to the restriction of prior technology or organizational inertia. For overcoming these problems and successful development of new product architecture, organizational design and management in the process of product development becomes essential. In case of Sharp, corporate development project team had been used to overcome the restrictions from architectural knowledge accumulated through previous product. After launching first new PDA by corporate development project team, Sharp created a new division and pushed an evolution of PDA, when new PDA market start to grow up rapidly toward a major market segmentation. As a result, Sharp was able to build up stable PDA project trajectory. However, Casio was late for three years in launching of new PDA architecture because previous division charging of Electronic Organizer tried to develop first new PDA. Casio's PDA development was prohibited by engineers of previous division because new PDA architecture was inferior on user interface and display definition. That is, Casio's first PDA development was restricted by architectural knowledge of previous product.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.83-89
• /
• 2017

A new technology has provided the nation, industry, society, and people with innovative and useful functions. National economy and society has been improved through this technology innovation. Despite the benefit of technology innovation, however, since technology society was sufficiently mature, the unintended side effect and negative impact of new technology on society and human beings has been highlighted. Thus, it is important to investigate a risk of new technology for the future society. Recently, the risks of the new technology are being suggested through a large amount of social data such as news articles and report contents. These data can be used as effective sources for quantitatively and systematically forecasting social risks of new technology. In this respect, this paper aims to propose a data-driven process for forecasting and assessing social risks of future new technology using the text mining, 4M(Man, Machine, Media, and Management) framework, and analytic hierarchy process (AHP). First, social risk factors are forecasted based on social risk keywords extracted by the text mining of documents containing social risk information of new technology. Second, the social risk keywords are classified into the 4M causes to identify the degree of risk causes. Finally, the AHP is applied to assess impact of social risk factors and 4M causes based on social risk keywords. The proposed approach is helpful for technology engineers, safety managers, and policy makers to consider social risks of new technology and their impact.

• 한국IT서비스학회지
• /
• 제13권4호
• /
• pp.19-43
• /
• 2014

Categorization means the process labeling or identifying an object based on what people already know or its similarity for people to be easily perceptible in external environment. If it is categorized, it is schematically conjectured from typical characteristic of the category. In this sense, the categorization of new products has an important effect upon the market performance. Nevertheless, the categorization of innovative new products is not easy and occasionally very ambiguous. In this study, we discuss how to strengthen the categorization strategy of new hybrid IT products through complementary bundling. The model of this study is based on Technology Acceptance Model (TAM) with resistance variable and verifies the statistical significance by undertaking a survey on consumers' awareness. In addition, we review the moderating effects of prior knowledge in the adoption process of complementary bundling. Through this analysis, we find out the structural relationship among the factors affecting adoption of complementary bundling. Also, it show that the influence of prior knowledge in respect of the adoption process is greater than others in case that there exists significant heterogeneity among strategic categories and complements. In conclusion, these findings suggest the following managerial implication. The categorization strategy of new hybrid IT product can be enhanced by complementary bundling, but the suitability among strategic category and complements should be evaluated exhaustively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.677-684
• /
• 2006

An ejector is a fluid transfer device to be used for mixing of fluids, maintaining vacuum, and overcoming a poor suction condition. To date, most ejectors have been made from the casting process. which is time-consuming and high-cost process. Therefore, a new production method of ejectors is desired if any. In this experimental study, we proposed a new type ejector manufactured from the commercial fitting materials and the welding process, which is equipped with an orifice type nozzle. The proposed ejector has a good integrity compared with the conventional ejector because the fittings have manufactured by forging and they have more strength than the casting materials. Furthermore we adopted a multi-opening orifice type nozzle for improving a suction capacity and compared with a single-opening orifice type nozzle. From the experimental results. we confirmed that the multi-opening nozzle had a food suction capacity than the single-opening nozzle and the proposed new type ejector showed higher vacuum than the conventional type ejector in non-load condition. These improved characteristics suggests that a new type ejector by using the commercial fittings opens the feasibility to be adopted in various industry fields and that the increased suction capacity can be achieved by altering the nozzle design of a conventional ejector.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1958-1967
• /
• 2000

Rapid Prototyping( RP ) has been increasingly applied in the process of design and development of new products. RP can shrink the time and expense required to bring a new product from initial concept to production. However, the necessity of using RP for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy materials, and cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed in this paper. It incorporates both material deposition in layers and material removal from the outer surface of the layer to produce the required surface finish. The new hybrid-RP system can dramatically reduce the total build time and fabricate largo-sized and freeform objects because it uses very thick layers, i.e.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.139-148
• /
• 2006

Catmull-Clark subdivision scheme provides a powerful method for building smooth and complex surfaces. But the number of faces in the uniformly refined meshes increases exponentially with respect to subdivision depth. Adaptive tessellation reduces the number of faces needed to yield a smooth approximation to the limit surface and, consequently, makes the rendering process more efficient. In this paper, we present a new adaptive tessellation method for general Catmull-Clark subdivision surfaces. Different from previous control mesh refinement based approaches, which generate approximate meshes that usually do not interpolate the limit surface, the new method is based on direct evaluation of the limit surface to generate an inscribed polyhedron of the limit surface. With explicit evaluation of general Catmull-Clark subdivision surfaces becoming available, the new adaptive tessellation method can precisely measure error for every point of the limit surface. Hence, it has complete control of the accuracy of the tessellation result. Cracks are avoided by using a recursive color marking process to ensure that adjacent patches or subpatches use the same limit surface points in the construction of the shared boundary. The new method performs limit surface evaluation only at points that are needed for the final rendering process. Therefore it is very fast and memory efficient. The new method is presented for the general Catmull-Clark subdivision scheme. But it can be used for any subdivision scheme that has an explicit evaluation method for its limit surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.124-124
• /
• 2010

Currently, extreme ultraviolet lithography (EUVL) is being investigated for next generation lithography. EUVL is one of competitive lithographic technologies for sub-22nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance due to the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore, new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• 한국정보통신학회논문지
• /
• 제17권7호
• /
• pp.1522-1530
• /
• 2013

중소기업의 기술사업화는 인적, 자원 등 인프라의 부족을 극복하는 과정으로서 기술사업화 전략을 찾아가는 것은 무엇보다도 중요하다. 불리한 조건을 극복하는 가장 명확한 방법은 시장지향적인 마케팅기획의 엄격함에 있으며 마케팅에 대한 기업가의 이해 여하는 기술개발과정에 중요하다. 모니터링단계에서 시장지향적인 기획이 중요하다는 현상을 파악하고 있으며, 기업의 기술사업화가 시장지향적 기술 및 제품 개발을 우선하는 아이템의 중요성을 강조한다. 시장지향적 아이템이 중소기업의 역량부족을 해결하고 성공을 보장할 것이다.