• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.1
• /
• pp.2503-2519
• /
• 1972

The studies were carried out to find the cause and the quantitative evaluation of sea dike materials loss which is occured during the period of construction works for the tideland reclamation projects on the west coast of Korea. Major subjects to studies were to establish the typical relationships between the tidal flow and the movement of dike materials, the tidal-flow and the erosion, the dike materials and the ratio of material movement(losses), construction methods and the ratio of materials movement (losses). Based on the above subjects, the studies were made for the purpose of obtain the following informations; (1) Collecting and evaluaing the data of dike material losses due to foundation settlement, from designed existing dikes on the west coast. (2) By the field investigation at A-San Sea Dike, Pyong Taek Project, the Comparison would be made by the relationships between the tide velocity and the movement of dike foundation under the natural conditions and the period of construction so that find out the relationship between the dike materials of foundation situation and settlements. With regard to the dike construction works, it is so difficult to calculate the exact quantity of material losses due to the foundation settlements. The major factors that affect the settlement losses of the dike materials are: (1) Topographical variation (2) Swepting the sectional area of dike by the tide velocity. (3) Dumping riprap to the outerside of dike during the period of construction works. (4) Sectional area losses by the cause of occurence of the new tide channels. (5) material losses by the heavy storms. (6) Consolidation settlement by the foundation weakness. (7) Material losses by the earth materials by tide flow. Most hi호 material losses were occured by the Consolidation settlement due to the foundation weakness, the maximum tide velocities due to decrease the cross sectional area of the gaps and erosion of foundation due to the range of tide, Inner and outerside of dike, or dike material loses due to the tide flow. Final conclusion would be obtained by the continuous measurement of consolidation settlement at the stage of final clusure of the dike. (It is scheduled to close on the end of 1972) However, intermediate conclusion can be introduced as follows: (1) The estimation of material(losses) during the period of construction works for the existing sea-dikes up to date were only empirical. The material losses at the general closure for design was estimated at 10% of the riprap, 20% of the earth materials, and 20% of the riprap, 40% of the earth materials at the final closure of the dike. The final closure estimated double quantity to the general closure, but it is still doubt. (2) The ratio of consolidation settlements was found smaller than the calculated quantity. It can be foreseen that settlement speeds is higher thom the calculated speeds. (3) The movement of dike foundation under the natural conditions were not so depends on the geological conditions of the foundation. (4) When the tide velocities was estimated 100 at the normal tide, it was estimated 125 at the high tide and 55 at the low tide. The tide velocities at the low tide shows apparently lower than the high tide and the higher velocities at the deep water depth.

• Journal of fish pathology
• /
• v.13 no.1
• /
• pp.21-29
• /
• 2000

A new nutritional disease has occurred among the hatchery-reared Korean bullhead fingerlings (Pseudobagrus fulvidraco) in the Chonbuk Province in September 1997. Diseased fish were all dead within 3-7 days, showing sluggish behavior, head up and tail down swimming. Most characteristic clinical signs were anaemia, clubbed and fused gill, skin desquamation. haemorrhage around the mouth and at the base of pectoral fins. Any causative bacteria and parasites were not isolated from the lesions and internal organs of the diseased fish. The hepatosomatic index, red blood cell count, hematocrit, hemoglobin and erythrocytes size of peripheral blood in the diseased fish were remarkably decreased compared with those of normal fish. In the histopathological observations, epithelial hyperplasia of the gill filaments initiated at the base of the gill was pronounced. This symptom was the characteristic appearence of all the diseased fish. A 0.6% saline bath and feeding a pantothenic acid-supplemented diet were conducted to decrease the mortality. Ten days after 0.6% saline bath or 25 days after feeding a pantothenic acid supplemented diet resulted in decreasing in the mortality. Microscopic appereance of the gill from the recovered fish was similar to that of the gill from healthy fish. These results indicate that the disease was caused by deficency of pantothenic acid in their diet and that 0.6% saline bath or supplementation of pantothenic acid in the diet was an effective way to decrease the mortality.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.13-19
• /
• 2008

Purpose: Human adipose tissue-derived mesenchymal stem cells(hATSCs) can be differentiated into multiple mesenchymal lineages, including bone, cartilage, and muscle. And growth hormone play important roles in the normal growth and development of the CNS. In this study, we explored whether the transplanted hATSCs and growth hormones could improve functional recoveries from rats with contusive spinal cord injury. Methods: We divided 30 female rats, which were subjected to a weight driven implant spinal cord injury, into 3 groups with 10 rats each; Group A as a control group, group B with hATSCs transplantation on injured region, and group C with hATSCs transplantation and GH administration for 7 days. Then, we researched their neurologic functional recoveries before and 2, 4, and 8 weeks after transplantation using Basso-Beattie-Bresnahan (BBB) locomotor rating scale. And we checked Y-chromosome positive cells by FISH(Fluorescent in situ hybridization) to identify the survival of transplanted mesenchymal stem cells. Results: After 4 weeks of transplantation, the group B and group C showed significant improvement of neurologic function on BBB locomotor rating scale in comparison with the group A(Group A: $13.1{\pm}0.58$, Group B: $14.6{\pm}0.69$, Group C: $14.9{\pm}0.56$). Moreover, the group C displayed meaningful recovery of neurologic function after 8 weeks in comparison with group B (Group B: $15.7{\pm}0.63$, Group C: $16.5{\pm}1.14$). The group A, the control one, improved for 5 weeks after injury, and had no more recovery. On the other hand, Group B and C showed the improvement of neurologic function continuously for 9 weeks after injury. Conclusion: In this study, we found out that hATSCs transplantation have an effect on neurologic functional recovery of spinal cord injured rat and GH injection seems to bring the synergistic results on this good tendency.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.115-128
• /
• 2002

Traffic engineers have developed and implemented various microscopic simulation models to verify the traffic performance and to prevent the expected problems. The existing microscopic simulation models categorize drivers into several types to reflect various drivers' driving patterns but miss the dynamics of drivers' behavior changed based upon the traffic conditions. It was found from the field data collected from two different merging sections on an urban freeway in Seoul, Korea, that the drivers' critical gap distributions are changed based on (1) the traffic density on the adjacent lane to the acceleration lane and (2) the opportunities left to merge in terms of distance to the end of acceleration lane. It was also found from the study that the drivers' critical gap distributions follow the Normal distribution. and its mean and variance change while a vehicle progresses on an acceleration lane. This paper proposes a new gap-acceptance model developed based on a set of drivers' critical gap distributions from each segment on the acceleration lanes. Through the comparison study between the field data and the results from the simulation utilizing the proposed model, it was verified that (1) the distribution of merging points on an acceleration lane to the adjacent main lane at different density levels, (2) the size of the gap accepted for merging and (3) the speed difference between the merging vehicle and the trailing vehicle at the time of merging are statistically identical to the field data at 95% confidence level.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.1
• /
• pp.48-53
• /
• 1995

This study investigates a simple mathematical model for the quantitative estimation of regional myocardial blood flow in experimental canine coronary artery thrombosis using Rb-82 dynamic myocardial positron emission tomography. The coronary thrombosis was induced using the new catheter technique by narrowing the lumen of coronary vessel gradually, which finally led to partial obstruction of coronary artery. Ten Rb-82 dynamic myocardial PET scans were performed sequentially for each experiment using our 5, 10 and 20 second acquisition protocol, respectively, and three regions of interest were drawn on the transaxial slices, one on left ventricular chamber for input function and the other two on normal and decreased perfusion segments for the flow estimation in those regions. Single compartment model has been applied to the measured sets of regional PET data, and the rate constants of influx to myocardial tissue were calculated for regional myocardial flow estimates with the three parameter fits of raw data by the Levenberg-Marquardt method. The results showed that, (1) single compartment model suggested by Kety-Schmidt could be used for the simple estimation of regional myocardial blood flow, (2) the calculated regional myocardial blood flow estimates were dependent on the selection of input function, which reflected partial volume effect and left ventricular wall motion, and (3) mathematically fitted input and tissue time activity curves were more suitable than the direct application of the measured data in terms of convergence.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.294-298
• /
• 1998

The factors affecting direct somatic embryogenesis from different parts of explant in liquid culture of Scrophularia buergeriana were investigated. Direct somatic embryogenesis was dependent on the explant tissues and stem was the most efficient explant. Rapid shoot development occurred on stem after 3-week culture but roots were not developed yet. Plantlets were not formed through somatic embryogenesis after 3-week culture of petiole. Though direct somatic embryo was not observed from leaf segment culture for 3 weeks, normal plantlets were developed after 8-week culture. BA played the main role for somatic embryogenesis in liquid culture and adding of either IAA or NAA caused rather adverse effects. Culture of stem segments in MS liquid medium with BA at 0.5 mg/ l or 0.1 mg/ l was proved to be the most efficient method for producing plantlets through direct somatic embryos.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.191-196
• /
• 2019

The edible ectomycorrhizal mushroom Amanita javanica is a valuable species protected by forest law in Korea. However, basic characterization data on its use as an important forest resource has been limited. This study was performed to determine mycelia growth characteristics of the domestically isolated Amanita javanica strain NIFoS 1267 on potato dextrose agar media under diverse culture conditions. Physical factors temperature, pH, and light, as well as chemical factors salts, heavy metals, and pesticides were examined for their effects on the growth of the mushroom strain. The mycelia of A. javanica strain exhibited optimal growth when cultured in dark at 30℃ in media with a pH of 5-6. Normal levels of growth were observed in media containing up to 2% saline. At a heavy metal ion content of 50 ppm, mycelial growth was not affected by arsenic ion but was affected by cadmium and lead ions. In the tests performed with two pesticides used in Korean forests, the growth of the mushroom strain was not affected by the presence of abamectin, but was inhibited in media containing acetamiprid, emamectin benzoate, or thiacloprid. These results are expected to facilitate artificial cultivation of A. javanica as a new commercial product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.21-29
• /
• 2005

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. Recently, ten years after the initial operation of the HANARO, one of the two primary cooling pumps was decontaminated for overhaul maintenance in 2004. Before decontamination exposure doserate and surface contamination level of primary cooling pump measured at 4 points. After final decontamination exposure doserate and surface contamination level of primary cooling pump remeasured by same method done before. It is easy to decontaminate the out side exposed surfaces of the pump, but it is difficult to approach the inside surface due to double volute installed in the casing. Therefore, a new decontamination facility has been developed to solve this problem. A concentrated de-contaminant (DX-300) is rotated in the closed pump casing by the impeller actuated by a temporary motor. Nuclide particles are removed by the emulsification effect of the de-contaminant and the surface contaminants are chemically removed from the pump by the corrosion and dissolution effect. The inside surfaces of the primary cooling pump have been decontaminated by using the facility. As results, the contamination level of the inside surfaces was maintained below the surface contamination limit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.113-118
• /
• 2011

This study was aimed to develop blend films by rice by-product (rice-hull and rice-bran) and bio-degradable materials. The rice by-product was firstly prepared from the pulverizing for making fine powder. Bio-degradable materials could be prepared by melting at high temperature. The mixture of the fine powder of rice by-product and melted bio-degradable materials was then blended and cast into films. The obtained films were investigated on their morphology, secondary structures and properties by using SEM, ICP and ASTM, respectively. Mechanical properties and degradability of these films were measured and compared to those of the PE films. Mechanical strength of bio-films was higher than that of PE films, however elongation ratio showed lower percent than that of PE film. In addition, bio-film could be degraded into fragments within 3 months under the field condition of normal upland crop cultivation. Bio-degradable mulching film indicated great potential for agronomic use as a new source of bio-degradable material.